| Official Luthiers Forum! http://luthiersforum.com/forum/ | |
| remove 2 sided tape http://luthiersforum.com/forum/viewtopic.php?f=10128&t=47336 | Page 1 of 1 | 
| Author: | mikemcnerney [ Mon Feb 22, 2016 6:39 pm ] | 
| Post subject: | remove 2 sided tape | 
| Today I glued my bridge on a tenor uke I used 2 clamps with a caul both inside & out. I used some 2 sided tape on the inside caul in order to keep in place white I positioned the clamps. Too clever! I cannot remove the inside caul which is approx. 3/4" x 3/4" x 3" I made a L-shaped block & tried to knock it with a hammer, didn't work I'm wondering about using some kind of solvent though it will not be easy applying it where I need it. please help! | |
| Author: | SteveSmith [ Mon Feb 22, 2016 8:25 pm ] | 
| Post subject: | Re: remove 2 sided tape | 
| Naptha will release it. | |
| Author: | Jim Watts [ Mon Feb 22, 2016 10:21 pm ] | 
| Post subject: | Re: remove 2 sided tape | 
| +1 on the Naptha | |
| Author: | mikemcnerney [ Tue Feb 23, 2016 4:05 pm ] | 
| Post subject: | Re: remove 2 sided tape | 
| Walked in to the shop with the naptha method on my mind & the caul had just 'popped' off thanks folks | |
| Author: | wbergman [ Thu Feb 25, 2016 7:25 pm ] | 
| Post subject: | Re: remove 2 sided tape | 
| You probably should still remove any adhesive residue. You are lucky it came off. I did a similar thing 20 years ago under the bridge extension. The block is still there. At least it has no acoustic effect. | |
| Page 1 of 1 | All times are UTC - 5 hours | 
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ | |