Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 1:59 pm


All times are UTC - 5 hours


Forum rules


Same rules apply to all forums at the Luthiers Forum.




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Mon Apr 04, 2016 11:35 am 
Offline
Mahogany
Mahogany

Joined: Wed Jun 29, 2011 9:34 am
Posts: 52
First name: Steve
Last Name: Blower
City: Keighley
State: West Yorkshire
Country: UK
Focus: Build
Status: Amateur
Since I've only made steel string guitars before with domed soundboards and a slight neck angle, this was my initial thought when planning the u bass project.

My question is, is this necessary on a low tension instrument like the u bass?

Can I leave the soundboard flat and have a straight neck as per a classical guitar?

What is the norm folks?

Cheers

Steve.


Top
 Profile  
 
PostPosted: Mon Apr 04, 2016 1:27 pm 
Offline
Cocobolo
Cocobolo

Joined: Thu Feb 09, 2012 4:10 pm
Posts: 272
First name: Chris
Last Name: Reed
City: Stowmarket
State: Suffolk
Zip/Postal Code: IP14 2EX
Country: UK
Focus: Build
Status: Amateur
On a uke I usually use a flat top, though Martins had a slight dome and some of the top makers dome their tops.

The U basses I've seen definitely had flat tops.

Neck angle depends on fingerboard thickness and bridge height, so I'd start from these plus your desired action at the 12th and then work out the angle from that. You might need a slight back angle, or be able to go flat, depending on your choices.


Top
 Profile  
 
PostPosted: Mon Apr 04, 2016 2:34 pm 
Offline
Mahogany
Mahogany

Joined: Wed Jun 29, 2011 9:34 am
Posts: 52
First name: Steve
Last Name: Blower
City: Keighley
State: West Yorkshire
Country: UK
Focus: Build
Status: Amateur
Cheers Chris,

So no fixed approach; that's good to know. I'll build it as I would a guitar and see how it goes.

Do people fit truss rod to ukes?

Regards

Steve


Top
 Profile  
 
PostPosted: Tue Apr 05, 2016 4:35 am 
Offline
Cocobolo
Cocobolo

Joined: Thu Feb 09, 2012 4:10 pm
Posts: 272
First name: Chris
Last Name: Reed
City: Stowmarket
State: Suffolk
Zip/Postal Code: IP14 2EX
Country: UK
Focus: Build
Status: Amateur
Truss rods are practically unknown. Some fit carbon fibre reinforcement, most don't bother (but for a U Bass? Pretty low tension, so I wouldn't).

Rob Collins at Hebden Bridge (tinguitar.com) makes excellent ukes, so if you need supplies he's your local man.


Top
 Profile  
 
PostPosted: Tue Apr 05, 2016 7:47 am 
Offline
Mahogany
Mahogany

Joined: Wed Jun 29, 2011 9:34 am
Posts: 52
First name: Steve
Last Name: Blower
City: Keighley
State: West Yorkshire
Country: UK
Focus: Build
Status: Amateur
Thanks again Chris.

No truss rod then. Saves a bit of time and cost.

It never ceases to surprise me how many instrument makers there are locally. Never come across Rob Collins before, but good to know he's there.

I think I have everything now, I struggled to find tuning machines in th UK so I've ordered some from the US.

All the best

Steve


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com