| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Ukulele side thickness http://luthiersforum.com/forum/viewtopic.php?f=10128&t=51471 |
Page 1 of 1 |
| Author: | Steve-atl [ Wed Jan 16, 2019 4:23 pm ] |
| Post subject: | Ukulele side thickness |
So I glued my neck on from my Stewmanc Ukulele Kit today which means I will be working on the finish. This will give me time to start on my scratch build. I bought the 14-Fret Baritone Bell Ukulele Plans from Georgia Luthier Supplies. I have one of Robert Gleason's Bending Blankets and have made the bending forum. I thought I would start by bending the sides first The plans have the top thickness but not the sides. did a google search and found this "For ukulele sides, aim for 60-70 thou (1.5-1.75 mm) in thickness. I find that this makes bending easier and that the bent wood is stiff enough without the extra thickness" The side wood is Mahogany. Does 60-70 thou (1.5-1.75 mm) in thickness. seem right. Thanks for all your help |
|
| Author: | Pmaj7 [ Wed Jan 16, 2019 11:30 pm ] |
| Post subject: | Re: Ukulele side thickness |
Yep! Sent from my SM-T350 using Tapatalk |
|
| Author: | profchris [ Thu Jan 17, 2019 4:48 am ] |
| Post subject: | Re: Ukulele side thickness |
Agreed. As it's a baritone I might go for around 1.8mm but thin it more where the waist bend is to be. I'd use a card scraper for that. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|