Official Luthiers Forum!
http://luthiersforum.com/forum/

Jazz Bass Build 2015-2016
http://luthiersforum.com/forum/viewtopic.php?f=10130&t=46878
Page 1 of 1

Author:  Stevo [ Mon Dec 21, 2015 10:57 am ]
Post subject:  Jazz Bass Build 2015-2016

Hey All,

I believe this is the right place to put it all.I'm returning to Luthiere after 15 year break!

Specifications are: -

    Mahogany body
    Flame Maple top
    Flame Mape neck, carbon reinforced, dual action truss rod
    Hardware undecided

The templates came from Portugal and proved to be very accurate and well worth the money.

Here's some first shots : -

Image

Image

Image

Image

Image

Author:  SteveSmith [ Mon Dec 21, 2015 12:58 pm ]
Post subject:  Re: Jazz Bass Build 2015-2016

Welcome back!! Looks like a fun project [:Y:]

Author:  Chris Pile [ Mon Dec 21, 2015 2:47 pm ]
Post subject:  Re: Jazz Bass Build 2015-2016

Love me some Jazz bass goodness. My favorite Fender body of all time. I've had..... how many? Half a dozen at least.

Author:  Stevo [ Mon Dec 21, 2015 3:22 pm ]
Post subject:  Re: Jazz Bass Build 2015-2016

Thanks guys. Some appreciation from over the pond!

Further thoughts, No scratchplate (not with a flame top!)... EMGs or Seymour Duncans... Possibly a Ghost Piezo bridge as well. The Mahogany will have lightening holes cut as already it weighs a ton!

It will have the bout cut at the rear, but no forearm chamfer. Yes I could 'bend' the flame over it, but my flame is 8-9mm thick, to allow for some subtle carving. Ebony board with some fancy MoP inlay will do nicely. Gotoh machine heads... Lemon yellow stain on the flame, cherry red subtle sunburst and no binding - the edge of the Maple will be good enough. Nitro Cellulose gloss to finish.

Here's the top:-

Image

Author:  Stevo [ Tue Dec 22, 2015 11:57 am ]
Post subject:  Re: Jazz Bass Build 2015-2016

Spent loads of time making a jig for lightening holes. Tried the first rout:-

Image

Tough stuff to rout, particularly on end grain! The trick is to drill out as much beforhand of course.

One thing I find a bit of a pain here is resizing graphics to get them to fit properly here (I teach IT so that's not the issue). Does the forum software not resize them?

Author:  dzsmith [ Thu Dec 24, 2015 9:26 am ]
Post subject:  Re: Jazz Bass Build 2015-2016

Whoa! The Maple is stunning!

Author:  Stevo [ Thu Dec 24, 2015 9:31 am ]
Post subject:  Re: Jazz Bass Build 2015-2016

I ran it through the thickness sander yesterday and it looks even better...

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/