Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
Oval Soundhole's challenge build(s) http://luthiersforum.com/forum/viewtopic.php?f=10133&t=37309 |
Page 2 of 3 |
Author: | oval soundhole [ Sun Aug 05, 2012 8:10 pm ] |
Post subject: | Re: Oval Soundhole's challenge build |
SteveSmith wrote: So, exactly where does the nail gun fit in the guitar stringing process?? You'd be surprised |
Author: | oval soundhole [ Sun Aug 05, 2012 11:18 pm ] |
Post subject: | Re: Oval Soundhole's challenge build |
Filippo Morelli wrote: He uses the nail gun to threaten his wood suppliers. How else does one get sub $10/set EIRW?! Filippo um, sure... lets go with that |
Author: | oval soundhole [ Mon Aug 06, 2012 1:21 pm ] |
Post subject: | Re: Oval Soundhole's challenge build |
I got the dreadnought strung up so it looks like I'll start on my uke tonight |
Author: | oval soundhole [ Mon Aug 06, 2012 10:46 pm ] |
Post subject: | Re: Oval Soundhole's challenge build |
So I thicknessed the top Then I laid out the bracing, but decided to go to bed because it's almost 12 and I've been up for about 36 hours... |
Author: | oval soundhole [ Tue Aug 07, 2012 8:57 pm ] |
Post subject: | Re: Oval Soundhole's challenge build |
So I decided to go with a really simple rosette; Then I worked on the back strip Then I glued on the bracing |
Author: | SteveSmith [ Tue Aug 07, 2012 9:33 pm ] |
Post subject: | Re: Oval Soundhole's challenge build |
Those clamps look so big I like the back strip. |
Author: | oval soundhole [ Wed Aug 08, 2012 2:45 pm ] |
Post subject: | Re: Oval Soundhole's challenge build |
Here are the plates now that they've been braced Bending sides I'll let them cool for a little while |
Author: | oval soundhole [ Thu Aug 09, 2012 12:19 am ] |
Post subject: | Re: Oval Soundhole's challenge build |
So I worked hard and was able to get the box closed and the neck laminated. Glueing on the top with my high tech clamps Now for the neck and the box |
Author: | oval soundhole [ Thu Aug 09, 2012 10:18 pm ] |
Post subject: | Re: Oval Soundhole's challenge build |
First I planed the neck to square up the surfaces: Then I used the spindle sander to sand the heel to the radius of the body: Then I glued the fretboard and headplate on: And roughed out the heel: I also glued on the top binding: My plan is to have this thing completely done by the 18th. |
Author: | DennisK [ Thu Aug 09, 2012 11:01 pm ] |
Post subject: | Re: Oval Soundhole's challenge build |
That fingerboard end shape is going to make it look like the instrument is wearing a tie Quite the speedy building you're doing! Looks good (except for that un-beveled tail block restricting the soundboard's vibrating area... and here I thought you were on my side about that, being a student of Mr. Somogyi ) |
Author: | oval soundhole [ Thu Aug 09, 2012 11:27 pm ] |
Post subject: | Re: Oval Soundhole's challenge build |
Thanks Considering that the heel block is less than 1/2" thick (and it's a uke) I didn't really think/care if it would be a slight factor in the tone |
Author: | Tony_in_NYC [ Fri Aug 10, 2012 12:29 am ] |
Post subject: | Oval Soundhole's challenge build |
You didn't care about the tone?? Better lock your doors because an angry mob of luthiers is heading your way with pitchforks and torches to run you out of town!! |
Author: | oval soundhole [ Fri Aug 10, 2012 3:52 pm ] |
Post subject: | Re: Oval Soundhole's challenge build |
Ok, so here's today's progress: |
Author: | Tony_in_NYC [ Fri Aug 10, 2012 3:53 pm ] |
Post subject: | Re: Oval Soundhole's challenge build |
Looks good Brian. |
Author: | oval soundhole [ Fri Aug 10, 2012 10:49 pm ] |
Post subject: | Re: Oval Soundhole's challenge build |
thanks, Tony Here's what the uke looks like as of now. I should be pore filling tomorrow night; this is going so fast I think I might as well start another uke tomorrow |
Author: | oval soundhole [ Sat Aug 11, 2012 12:56 pm ] |
Post subject: | Re: Oval Soundhole's challenge build |
Fretted the neck: |
Author: | Tony_in_NYC [ Sat Aug 11, 2012 5:06 pm ] |
Post subject: | Oval Soundhole's challenge build |
oval soundhole wrote: Fretted the neck: You sure did and it does look like a tie. |
Author: | SteveSmith [ Sat Aug 11, 2012 6:09 pm ] |
Post subject: | Re: Oval Soundhole's challenge build |
Tony_in_NYC wrote: oval soundhole wrote: Fretted the neck: You sure did and it does look like a tie. That's what I was thinking. |
Author: | oval soundhole [ Mon Aug 13, 2012 6:26 pm ] |
Post subject: | Re: Oval Soundhole's challenge build(s) |
Well considering I have nearly four months left, I still have $100 left in my budget, and I'm about to start finishing this uke I drew up plans for the next uke in my series of 3 ukes I plan on making for this challenge. Here's the first uke, getting ready for finish... And here are the plans I drew up (bridge is just in an approx. location) And my materials I joined the walnut back too |
Author: | WudWerkr [ Mon Aug 13, 2012 6:37 pm ] |
Post subject: | Re: Oval Soundhole's challenge build(s) |
Hes a wild man I tellz ya , A wild man !! |
Author: | weslewis [ Mon Aug 13, 2012 8:03 pm ] |
Post subject: | Re: Oval Soundhole's challenge build(s) |
looks good, looking forward to the harp uke!!! |
Author: | DennisK [ Mon Aug 13, 2012 8:46 pm ] |
Post subject: | Re: Oval Soundhole's challenge build(s) |
Awesome! Love to see how much harp ukuleles seem to be catching on. I don't know whether to feel proud or ashamed of how much time I spend on my instruments. I've only done design work, thinned some plates, and cut half my rosette pieces, and you're already done and on to the next one... But once again, I'm bothered by bridge mobility restriction... that is, the bass side of the bridge being right up on the perimeter, rather than fiddling the shape and neck angle to get the bridge centered horizontally. As with the un-beveled tail block on the regular uke, I know it's commonly done that way, but for the life of me I can't understand why. Surely it would hurt bass response, which is even more necessary when you need to support the sub-bass string frequencies. Do you have any insight, or just following tradition? |
Author: | oval soundhole [ Wed Aug 15, 2012 10:31 am ] |
Post subject: | Re: Oval Soundhole's challenge build(s) |
So I thicknessed the top and I'll brace it today. |
Author: | oval soundhole [ Wed Aug 15, 2012 11:02 pm ] |
Post subject: | Re: Oval Soundhole's challenge build(s) |
Glueing on the bracing: |
Author: | SteveSmith [ Thu Aug 16, 2012 5:35 am ] |
Post subject: | Re: Oval Soundhole's challenge build(s) |
it's gonna be a cute looking little thing |
Page 2 of 3 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |