Official Luthiers Forum!
http://luthiersforum.com/forum/

Wes's build
http://luthiersforum.com/forum/viewtopic.php?f=10133&t=37320
Page 1 of 2

Author:  weslewis [ Wed Aug 01, 2012 2:38 pm ]
Post subject:  Wes's build

Bubinga back and sides $40
Sitka top $15
top was used for packing on some tops I purchased a year ago, extra pieces, so I used shipping cost for value .
neck , fretboard, bindings , bridge , linings ,etc will be cut from board stock I have acclimated.....$30 bucks or so

Author:  Tony_in_NYC [ Wed Aug 01, 2012 9:19 pm ]
Post subject:  Re: Wes's build

That soundboard says "No charge" on it. You paid the shipping for the wood you bought. Packing material has no value in my mind. Just something to think about if you get too close to your budget limit. I don't think anyone would have a beef with packing material having no value.

Author:  weslewis [ Thu Aug 02, 2012 9:20 pm ]
Post subject:  Re: Wes's build

I got the sides bent , the soundboard and back glued up!!

Author:  weslewis [ Fri Aug 03, 2012 9:01 pm ]
Post subject:  Re: Wes's build

cutting linings from a bubinga board , and adi spruce for laminated braces..

Author:  weslewis [ Sun Aug 05, 2012 7:40 pm ]
Post subject:  Re: Wes's build

got most of the bending done, including the bindings as well...I am using solid linings so I bend the individual pieces , glue the laminates then rebend to the final shape...…the soundboard braces are leftover adi spruce...

Author:  WudWerkr [ Sun Aug 05, 2012 9:04 pm ]
Post subject:  Re: Wes's build

Looking good ! [:Y:]

Author:  WudWerkr [ Sun Aug 05, 2012 9:06 pm ]
Post subject:  Re: Wes's build

Tony_in_NYC wrote:
That soundboard says "No charge" on it. You paid the shipping for the wood you bought. Packing material has no value in my mind. Just something to think about if you get too close to your budget limit. I don't think anyone would have a beef with packing material having no value.



I agree !

Author:  weslewis [ Sun Aug 05, 2012 9:27 pm ]
Post subject:  Re: Wes's build

I should have no problem with cost , most everything is being made from leftovers or boards I have , and I did get some of those cheap Chinese tuners, like 4 sets about a year ago, and you definitely get what you pay for ..stuff is junk, at about 7 bucks per set they are overpriced!! laughing6-hehe
I will most certainly get rid of those once the build is completed.....having fun though...soundboard will have my sweep carbon fiber bracing , and will be a 13 fret OM style, probably with a soundport…along with a compensated nut and saddle, using a Gore inspired nut machining jig for the nut...hopefully I will have it completed on time...Darn Full time gets in the way of my building time!!!!! gaah

Author:  Tony_in_NYC [ Sun Aug 05, 2012 11:28 pm ]
Post subject:  Wes's build

Looks good to me!

Author:  weslewis [ Wed Aug 08, 2012 6:45 pm ]
Post subject:  Re: Wes's build

making progress!! bliss

Author:  WudWerkr [ Thu Aug 09, 2012 8:05 am ]
Post subject:  Re: Wes's build

This is going to be a nice build ! Looking forward to hearing this one ! [clap]

Author:  Bryan Bear [ Thu Aug 09, 2012 9:50 am ]
Post subject:  Re: Wes's build

Nice looking, that rim looks bullet proof too. Nice clean work.

Author:  WudWerkr [ Thu Aug 09, 2012 1:15 pm ]
Post subject:  Re: Wes's build

Would you be willing to elaborate a bit on the heel block design . Thats interesting.

Author:  weslewis [ Thu Aug 09, 2012 1:39 pm ]
Post subject:  Re: Wes's build

It's just 3/4 inch ply with.a bubinga cap and laminated splints between the linings
bliss

Author:  weslewis [ Sun Aug 12, 2012 9:08 am ]
Post subject:  Re: Wes's build

made the rosette last night..its padauck thicknessed to .028 then ca'd one at a time in a .031 channel...I cut the channel , apply shellac , glue in strip , plane / sand smoothe, then go to the next one..

Author:  WudWerkr [ Sun Aug 12, 2012 9:40 am ]
Post subject:  Re: Wes's build

That Is Nice !! Wow . [:Y:] [:Y:]

Author:  Bryan Bear [ Sun Aug 12, 2012 9:44 am ]
Post subject:  Re: Wes's build

Awesome!

Author:  Tony_in_NYC [ Sun Aug 12, 2012 10:24 am ]
Post subject:  Wes's build

I have seen a rosette like that with 4 circles but this is much cooler! Really nice!

Author:  SKBarbour [ Sun Aug 12, 2012 10:37 am ]
Post subject:  Re: Wes's build

very cool rosette!

Author:  SteveSmith [ Sun Aug 12, 2012 12:36 pm ]
Post subject:  Re: Wes's build

That is ingenious - I like it.

Author:  StevenWheeler [ Sun Aug 12, 2012 5:20 pm ]
Post subject:  Re: Wes's build

Sweet rosette Wes. I'm getting dizzy.

Steve

Author:  weslewis [ Sun Aug 12, 2012 8:40 pm ]
Post subject:  Re: Wes's build

Nothing like spending a whole sunday watching TV and "loofering" as my better half puts it!! pizza

Got the soundhole doubler glued on, and the bridge plate and carbon fiber epoxied on, along with getting the fretboard cut, binding installed , and fretmarkers …

Author:  weslewis [ Sun Aug 12, 2012 8:41 pm ]
Post subject:  Re: Wes's build

fret markers made with padauck scrap

Author:  weslewis [ Tue Aug 14, 2012 8:46 pm ]
Post subject:  Re: Wes's build

bracing the top with carbon fiber tow...

Author:  WudWerkr [ Wed Aug 15, 2012 7:07 am ]
Post subject:  Re: Wes's build

I like the fret board wes. Crap , I like the whole build LOL great work

Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/