Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 12:43 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 13 posts ] 
Author Message
 Post subject: I'm in
PostPosted: Sun Jan 27, 2013 1:08 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Nov 04, 2012 12:10 pm
Posts: 76
First name: Britt
Last Name: Askew
State: North Carolina
Focus: Build
Status: Amateur
I will jump in too. This will be my first build. Going to be an electric with a mahogany body. Probably mahogany for the neck and ebony for the fretboard. I dont have a clue about pickups yet, what I do want is something bluesy what I dont want is a big pickguard hiding the wood.
Here is a picture of the body, It was green when I first got it but I have had it drying for around 10 years now.


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: I'm in
PostPosted: Sun Jan 27, 2013 7:26 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Welcome , Looking forward to seeing your build ! Glad you cold jump in ! [:Y:]

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: I'm in
PostPosted: Fri Feb 01, 2013 4:53 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Apr 13, 2008 9:13 pm
Posts: 104
Location: Southeastern Kentucky
First name: Andy
Last Name: Miranda
Focus: Build
Status: Amateur
The wood looks good. Did you do the cut out yourself or order it pre-made?

As for pickups, look into Lindy Fralin or Bill Lawrence (under the name Wilde Bill...not that other guy). They make some really great pickups. I've got a set of Fralins in my Warmoth LP that I love.


Top
 Profile  
 
 Post subject: Re: I'm in
PostPosted: Fri Feb 01, 2013 7:02 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Nov 04, 2012 12:10 pm
Posts: 76
First name: Britt
Last Name: Askew
State: North Carolina
Focus: Build
Status: Amateur
A friend of mine give me this wood years ago. He was a truck driver and said he went to a place in Norfolk VA to make a delivery and they had a big crate full of this but would only let him have 3 pieces, this one was the only one big enough for a guitar.The wood was some kind of shipping crates. The other 2 are long gone and I really want to kick myself for it now that I think about the headstock.
I cut it, the bandsaw blade I used was 1" wide so the curves are ugly

I will check those pickups out, thanks


Top
 Profile  
 
PostPosted: Mon Sep 16, 2013 9:04 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Nov 04, 2012 12:10 pm
Posts: 76
First name: Britt
Last Name: Askew
State: North Carolina
Focus: Build
Status: Amateur
Finally got all my pieces and I have been making some full size drawings of the top and sides.

I have a couple questions about the pickups. I went with the Fralin p90s
1- Am I right in assuming the pickups can be installed with the wire coming off of either side?
2- Do I want the pickups sitting firmly on the body? or a piece of foam under them ? or something else/


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: I'm in
PostPosted: Tue Sep 17, 2013 11:20 am 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur
I think they'll work either way, I always install them with the wire down towards the control cavity.
I like to screw the pickups directly to the body, if there's any tone contribution from the wood this method maximizes it.

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon


Top
 Profile  
 
 Post subject: Re: I'm in
PostPosted: Thu Sep 19, 2013 12:17 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Nov 04, 2012 12:10 pm
Posts: 76
First name: Britt
Last Name: Askew
State: North Carolina
Focus: Build
Status: Amateur
Several things combined to make me to chamber the body.
One was the body was on the heavy side 6 lb 4 oz before and it ended up 4 lb 5 oz after chambering.
The fact that I didnt have something that matched good for the headstock, and, I did have a nice piece of redwood that would work good for a top.

Now I am working to cut out the back where the pots will be. I am hoping to use the piece I cut out as the cover so the grain will match.


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: I'm in
PostPosted: Thu Oct 10, 2013 11:18 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Nov 04, 2012 12:10 pm
Posts: 76
First name: Britt
Last Name: Askew
State: North Carolina
Focus: Build
Status: Amateur
I do plan on cutting my own fret slots in the future but as you know this stuff gets expensive. So I decided to buy a slotted fretboard this time.
I was planning on binding the fingerboard with another piece of ebony that I had but the colors dont match :cry: and I dont want to dye it so I am now planning on trimming the fret tang back and filling the hole with some black epoxy.

When I was cutting the inlay I decided to put a dull chisel in my hands and I caused a small piece of ebony to chip out , you can see it in the picture. I am thinking there are 2 possible fixes,?? CA glue and some ebony saw dust OR some epoxy died black ? Right now I am leaning towards the CA glue fix ?

The inlays are just laying halfway in the cutouts in the picture, I still need to finish cutting to size. This is my first time trying inlay.


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: I'm in
PostPosted: Thu Oct 10, 2013 5:32 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Nov 04, 2012 12:10 pm
Posts: 76
First name: Britt
Last Name: Askew
State: North Carolina
Focus: Build
Status: Amateur
I got the inlays in still need to sand them down.

My plan was to use mahogany for the neck when I started. When I started I was under the impression that ONLY quartersawn wood was good enough for a neck but I have read here that some like flatsawn curly maple and I see that some suppliers sell it (flatsawn neck blanks) so it has me curious ? and since it is a bolt on neck that can be switched if it goes bad, I am thinking about trying a piece of curly maple I have.


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: I'm in
PostPosted: Thu Oct 10, 2013 8:07 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Jan 20, 2009 12:41 am
Posts: 603
Location: LaCrosse WI
First name: Jason
Last Name: Moe
City: LaCrosse
State: WI
Zip/Postal Code: 54601
Country: USA
Focus: Build
Status: Semi-pro
The pickups should have a little spring that goes around the screw on the bottom of the pickup, like a ball point pen has around the ink refill. So you can adjust the height of the pickup to the strings.

_________________
Jason Moe
LaCrosse WI 54601


Top
 Profile  
 
 Post subject: Re: I'm in
PostPosted: Fri Oct 11, 2013 12:46 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Nov 04, 2012 12:10 pm
Posts: 76
First name: Britt
Last Name: Askew
State: North Carolina
Focus: Build
Status: Amateur
JasonMoe wrote:
The pickups should have a little spring that goes around the screw on the bottom of the pickup, like a ball point pen has around the ink refill. So you can adjust the height of the pickup to the strings.

Just when you think you have it figured out .... Oh well

I fixed the chip out with CA and sawdust and there is no sign of ever being a problem. I did get the inlay finished. I used stabilized redwood burl for the inlays. I also cut out a couple pieces of the burl that I could make some pickup covers with if I decide to, right now I am thinking black would look better ??


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: I'm in
PostPosted: Fri Oct 11, 2013 6:30 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Jan 20, 2009 12:41 am
Posts: 603
Location: LaCrosse WI
First name: Jason
Last Name: Moe
City: LaCrosse
State: WI
Zip/Postal Code: 54601
Country: USA
Focus: Build
Status: Semi-pro
I love the inlays, looks very nice!

_________________
Jason Moe
LaCrosse WI 54601


Top
 Profile  
 
 Post subject: Re: I'm in
PostPosted: Sat Oct 12, 2013 7:08 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Jan 13, 2010 12:46 am
Posts: 1247
First name: Beth
Last Name: Mayer
City: Tucson
State: AZ
Country: United States
Focus: Build
Status: Amateur
Nice job on the inlays!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com