Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 10:20 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 39 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Mon Apr 01, 2013 1:33 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
I still haven't finished my first so I would like to enter the contest. I just got settled in my own shop/house with my lady here in Alaska. I'm still finishing up my first (tons of errors) but this is just what I need to get back into the groove. So this will technically be my second build regardless which I finish first.

I just bent the sides tonight. It will be my own OM design which is 11.5" at the upper bout, 9" at the waist and 15" at the lower bout. I kept it a bit small at the lower bout to accommodate several sets of Dalbergia Cultrata that I mistakenly bought as BRW. I also have a bunch of really nice, but narrow curly redwood and several other tops and backs of similar measurements. I'll post pics tomorrow or later in the week. Here are the materials.

B&S- Quilted Maple
Top- Curly Redwood braced with Sitka Spruce
Neck/bracing- Honduran Mahogany
Head plate/Fretboard/Bridge- Gabon Ebony
Binding- Gabon Ebony with BWBW or BWB or BW purf depending on the location
Rosette- Gabon Ebony

I got married and I sold my beloved Webber custom baritone with Miniflex 2 Mic to pay rent. The scale of this guitar will be 27.5" baritone to replace it. Pickup will be the Anthem. (full)


Last edited by fingerstyle1978 on Sun Oct 13, 2013 11:57 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Mon Apr 01, 2013 6:36 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
Great wood choices, Joey, but I was really hoping to see you use the coco set in your avatar! Did you use it for your 1st?
Anyways, glad you are settled and joining the challenge! :D

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
PostPosted: Mon Apr 01, 2013 10:50 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Actually the coco sides are still in NY with a bunch of my other sets. I bought too much stuff when I was deployed and never really slowed down when I got back. Anyways that set is reserved for a special build for myself. I want it to be a baritone multi scale decked out in Paua Abalone, but that's just too much ambition for me right now. Once I get a couple under my belt I'll give it a go. Well I'm off to work now, can't wait to get home and get back to work!


Top
 Profile  
 
PostPosted: Wed Apr 10, 2013 1:38 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
I've got the quilted maple sides bent but I had some bad grain raising in a couple parts. One in the upper bout and one in the lower bout. The one in the lower bout is the worse of the two. It's so bad that I do not believe that I can get it out by sanding without sanding through the side.

Is there anything I can do to fix it? I've been thinning them to laminating some thin mahogany on the interior. Not sure if that will work or not. Any suggestions?


Top
 Profile  
 
PostPosted: Wed Apr 10, 2013 1:49 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Attachment:
ImageUploadedByTapatalk1365576542.766754.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Wed Apr 10, 2013 1:52 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Attachment:
ImageUploadedByTapatalk1365576778.750498.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Wed Apr 10, 2013 3:38 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
Ouch! Maybe try wetting it again and clamping it in your mold with a caul to flatten it out.


Top
 Profile  
 
PostPosted: Wed Apr 10, 2013 7:02 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Dec 21, 2012 11:52 am
Posts: 1388
First name: Zeke
Last Name: McKee
City: Goodlettsville
State: TN
Zip/Postal Code: 37070
Country: United States
Focus: Build
Status: Amateur
I've found that a clothes iron with steam is pretty good at flattening humps. I have a form the shape of 1 guitar side and I place the side on this form and iron away.


Top
 Profile  
 
PostPosted: Wed Apr 10, 2013 9:07 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jan 22, 2010 9:59 pm
Posts: 3552
First name: Dennis
Last Name: Kincheloe
City: Kansas City
State: MO
Country: USA
Focus: Build
Status: Amateur
How thin are they? What are you using to bend? If a hot pipe, try mashing it against the pipe with a hunk or 2x4 or something and see if it will bend flat :)


Top
 Profile  
 
PostPosted: Wed Apr 10, 2013 12:28 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Dennis- I l eft them relatively thick (.090) and actually I grabbed the wrong side initially which was waaaaay too thick (.120) because I had a pile that was all mixed up and my shop wasn't as organized as it is now. It turned out that it didn't matter. Both sides bent well at both thicknesses and both sides have potato chipped on me. Maybe I used too much water? I was worried about scortching it. I hand sanded the other side down to .90 with 60 grit by hand so they are more even now. I use a side bender to get close and then a hot pipe to make fine adjustments. So far I've done the following-

1. Initial bend in the jig
2. let sit overnight
3. Fine tune on the pipe
4. Put back in the bender re-heated and let sit overnight again
5. Started sanding out the bumps


Top
 Profile  
 
PostPosted: Sun Apr 14, 2013 4:46 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Attachment:
ImageUploadedByTapatalk1365975928.297599.jpg
I made some turnbuckles and got the Tailblock in still working on the head block


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Sun Apr 14, 2013 4:48 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Attachment:
ImageUploadedByTapatalk1365976072.063390.jpg
Attachment:
ImageUploadedByTapatalk1365976131.665703.jpg
Attachment:
ImageUploadedByTapatalk1365976017.741731.jpg
....also an aurora storm last night


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Sun Apr 14, 2013 4:59 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jun 10, 2012 10:04 am
Posts: 773
First name: Peter
Last Name: Fenske
City: Leeds
State: Yorkshire
Country: Uk
Focus: Build
Status: Amateur
Wow that must have been amazing! I would love to see the northern lights in person.

_________________
"I am always doing that which I cannot do, in order that I may learn how to do it."
Pablo Picasso

https://www.facebook.com/FenskeGuitars


Top
 Profile  
 
PostPosted: Sun Apr 14, 2013 5:12 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
I can't recommend it enough. If you ever get a couple free weeks in March or October that's the time to go


Top
 Profile  
 
PostPosted: Mon Apr 15, 2013 3:38 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
Joey, I just showed my wife the A.B. pictures, and she pointed out what looks like a face looking down in picture #2. Can't tell if it is J.C or V.Mary or not! Wonderful pictures! :D

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
PostPosted: Mon Apr 15, 2013 5:23 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Alex Kleon wrote:
Joey, I just showed my wife the A.B. pictures, and she pointed out what looks like a face looking down in picture #2. Can't tell if it is J.C or V.Mary or not! Wonderful pictures! :D

Alex


Hahaha. Yeah I didn't notice it at the time but I can see it now. At the time I was waiting for the freaking aliens to land!!! Eat Drink


Top
 Profile  
 
PostPosted: Sat Sep 28, 2013 3:30 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Finally back to work on this thing. Since my last posted I moved again and re-set up shop, and took a trip to NY. Not sure which category I belong in but if I do finish this, it will be my first completed build, second attempt.

Attachment:
ImageUploadedByTapatalk1380400167.315200.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Sat Sep 28, 2013 3:32 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Attachment:
ImageUploadedByTapatalk1380400271.293194.jpg



MDF radius dish warped and I threw out the last jig (it sucked anyways) built a new one and routed this guy this morning out of leftover birch ply. Gonna shellac it later.
Attachment:
ImageUploadedByTapatalk1380400281.626094.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Sat Sep 28, 2013 3:34 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
These were in some other threads but were never posted here in the build thread.

Attachment:
ImageUploadedByTapatalk1380400380.176652.jpg


Attachment:
ImageUploadedByTapatalk1380400437.577153.jpg


Attachment:
ImageUploadedByTapatalk1380400452.844053.jpg


Attachment:
ImageUploadedByTapatalk1380400472.460335.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Sat Sep 28, 2013 8:39 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
I decided to give this a try. Glad I had some eye protection on. Won't be doing that again.
Attachment:
ImageUploadedByTapatalk1380418697.926353.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Sun Sep 29, 2013 7:02 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
Looking good, It will interesting hearing a baritone guitar.
Actually drove through Fairbanks once, I spent most of 1992 on Kodiak Island sitting on a weir on the Uganik River as a volunteer for Fish & Wildlife. Lots of fish and bears......


Top
 Profile  
 
PostPosted: Sun Sep 29, 2013 11:19 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Thanks, I love baritones. I actually prefer them over regular guitars these days, hence this build. I still haven't been to Kodiak, it's on my short list of things left to do before I leave AK.


Top
 Profile  
 
PostPosted: Thu Oct 03, 2013 2:13 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Attachment:
ImageUploadedByTapatalk1380827626.368162.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Fri Oct 04, 2013 1:59 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Spent most of the night sanding and scraping ripples out of the sides.
Attachment:
ImageUploadedByTapatalk1380869873.536580.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Sat Oct 12, 2013 3:00 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Made some shellac.

Image

Shellacked the body to raise the grain and protect. I think I've decided on glossy try oil on B&S, headstock front and back. Matte tru-oil neck and FP top.

Image


glued up purflings/binding. We'll see how it goes in the bender tomorrow.

Image

Old lam trimmer died. Fitting the new one for the bushing on the binding jig.

Image

Tapped.
Image

Good to bend, route and bund in the AM.
Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 39 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com