Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 2:19 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Blackshear Restoration
PostPosted: Mon Jan 16, 2017 10:00 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jun 04, 2007 3:31 am
Posts: 904
Location: Candler, NC United States
Hey all,

A while back, fantastic luthier and forum member, Mike Collins, announced that he had an early Tom Blackshear flamenco-style guitar that was in pretty desperate shape, and was willing to give it to either a repair person, builder, or teacher willing to document and share the restoration process. Well, I guess since I do a little of each of those, I was deemed the lucky winner. I spent most of last year developing the repair end of my business, which has kept me pretty busy, so I wasn't able to delve into the project until just recently. I'm happy to say, I've taken the first steps of dismantling the guitar, starting by removing the fretboard, then tackling removing the top. Here are some shots:

Image
The top has been sanded within an inch of its life, down to paper-thin in some areas.
ImageImageImage
Image
Image
Image
And here are a few interior shots:
Image
Image
Image
Image
Image

I used a flexible heat blanket to make quick work of the fretboard:
Image
Image
When the fingerboard came loose, I was excited to see that the original rosette was totally different from the one visible outside the footprint of the fretboard extension. Instead of the dull, cool colors of the visible rosette, the hidden rosette fragments are vibrant and more detailed than the coarse, pixelated replacement.
Image
Image
Once that was done, I turned my focus to removing the bindings from the top and sides. I tried salvaging the bindings, but I quickly realized that was futile, as they were tenaciously glued in. So turning to plan B, I grabbed my trusty laminate trimmer and binding channel routing fixture, and proceeded to rout the Brazilian Rosewood bindings away:
Image
Image
Then it was just a matter of unzipping the top from the linings with a palette knife. The last place to come loose was where the top was glued to the Spanish heel/neck block:
Image
Image
Image
Image
Image
Image








Sent from my iPhone using Tapatalk

_________________
Mountain Song Guitars www.mountainsongguitars.com


Top
 Profile  
 
PostPosted: Mon Jan 16, 2017 11:01 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Nov 11, 2008 9:13 pm
Posts: 832
Location: Durango CO
First name: Dave
Last Name: Farmer
City: Durango
State: CO
" Never heard of this Blackshear guy. I'll just chuck me up some 36 grit on the old orbital and fix this thing right up"


oops_sign


Top
 Profile  
 
PostPosted: Tue Jan 17, 2017 12:38 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Feb 12, 2009 10:27 pm
Posts: 2082
Location: South Carolina
First name: John
Last Name: Cox
Focus: Build
Status: Amateur
So what the heck happened to that poor rosette? Did they sand through it and then decide to replace it with a paper model from the copy machine?

Wow!


Top
 Profile  
 
PostPosted: Fri Jan 20, 2017 10:54 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jun 04, 2007 3:31 am
Posts: 904
Location: Candler, NC United States
truckjohn wrote:
So what the heck happened to that poor rosette? Did they sand through it and then decide to replace it with a paper model from the copy machine?

Wow!


Best I can tell, it was replaced at some point before the top was sanded down, or in the process of sanding the top they went through the rosette, replaced it with the blue one, then tried to sand it down to the thinned top by hand -- the old rosette is raised but rounded over into the top.

_________________
Mountain Song Guitars www.mountainsongguitars.com


Top
 Profile  
 
PostPosted: Fri Jan 20, 2017 10:57 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jun 04, 2007 3:31 am
Posts: 904
Location: Candler, NC United States
My next step is to transcribe the bracing pattern and dimensions to paper. Then the real fun begins...Image


Sent from my iPhone using Tapatalk

_________________
Mountain Song Guitars www.mountainsongguitars.com


Top
 Profile  
 
PostPosted: Fri Jan 20, 2017 12:08 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Feb 12, 2009 10:27 pm
Posts: 2082
Location: South Carolina
First name: John
Last Name: Cox
Focus: Build
Status: Amateur
Tom has posted some pretty interesting commentary on voicing flamencos...

Is there any evidence of this sort of post construction voicing?

Are you planning to try to replicate his voicing technique or just copy the bracing more or less as-is?


Top
 Profile  
 
PostPosted: Fri Jan 20, 2017 11:12 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jun 04, 2007 3:31 am
Posts: 904
Location: Candler, NC United States
That's a great question, and one I'm working through as I go. But my current plan is to follow his bracing pattern but use lighter, more triangular bracing for the main intersecting braces. The fan braces I'll probably duplicate.


Sent from my iPhone using Tapatalk

_________________
Mountain Song Guitars www.mountainsongguitars.com


Top
 Profile  
 
PostPosted: Fri Jan 20, 2017 11:21 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jun 04, 2007 3:31 am
Posts: 904
Location: Candler, NC United States
I didn't see any evidence of post-construction voicing either, other than the popsicle stick cleats to hold the paper-thin top together. Image


Sent from my iPhone using Tapatalk

_________________
Mountain Song Guitars www.mountainsongguitars.com


Top
 Profile  
 
PostPosted: Mon Jan 23, 2017 7:27 pm 
Offline
Cocobolo
Cocobolo

Joined: Mon Jun 07, 2010 11:14 am
Posts: 109
First name: Jan-Alexis
Last Name: Tremblay
City: Montreal
Country: Canada
Focus: Build
Status: Amateur
I'll be following along!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com