Official Luthiers Forum!
http://luthiersforum.com/forum/

Volute of the day
http://luthiersforum.com/forum/viewtopic.php?f=10137&t=49428
Page 1 of 1

Author:  david farmer [ Wed May 31, 2017 5:20 pm ]
Post subject:  Volute of the day

Attachment:
WIN_20170531_16_08_29_Pro - Copy.jpg

Author:  SteveSmith [ Wed May 31, 2017 6:41 pm ]
Post subject:  Re: Volute of the day

Hmmmmmmm

Author:  sdsollod [ Wed May 31, 2017 7:01 pm ]
Post subject:  Re: Volute of the day

Interesting... Can we see the rest of the headstock?

Author:  Durero [ Wed May 31, 2017 9:20 pm ]
Post subject:  Re: Volute of the day

Wow that's taking it further than I've ever seen before!


Not into volutes myself but variety is nice to see.

Author:  david farmer [ Thu Jun 01, 2017 9:26 am ]
Post subject:  Re: Volute of the day

sdsollod wrote:
Interesting... Can we see the rest of the headstock?

Solid rosewood. Matching strap button.
Attachment:
WIN_20170601_07_09_32_Pro - Copy.jpg

Attachment:
WIN_20170601_07_10_43_Pro - Copy.jpg

Author:  SteveSmith [ Thu Jun 01, 2017 10:01 am ]
Post subject:  Re: Volute of the day

King of Bling

Author:  Quine [ Thu Jun 01, 2017 11:23 am ]
Post subject:  Re: Volute of the day

Volute-o-licious

Author:  DanKirkland [ Thu Jun 01, 2017 4:34 pm ]
Post subject:  Re: Volute of the day

Well... that's interesting. Seems like he was channeling some pre-20th century design features with the looks and bling of it

Author:  sdsollod [ Thu Jun 01, 2017 4:49 pm ]
Post subject:  Re: Volute of the day

Very elaberate. Nicely done. May not be for everyone, but obviously a lot of work went into that. Could we see the rest of the guitar?

Author:  J De Rocher [ Sun Jun 04, 2017 3:25 pm ]
Post subject:  Re: Volute of the day

That's different. A lot of work indeed, with those recessed tuners. It might be the angle of the photo, but the curve into the volute from the neck shaft appears to start just south of the nut which would make thumb placement for some chords like jazz fingerings of F7 or Fmaj7 a bit cramped, at least for me. I wonder if this is supposed to be an aesthetic feature, or a structural enhancement, or....

Author:  david farmer [ Sun Jun 04, 2017 4:24 pm ]
Post subject:  Re: Volute of the day

J De Rocher wrote:
That's different. A lot of work indeed, with those recessed tuners. It might be the angle of the photo, but the curve into the volute from the neck shaft appears to start just south of the nut which would make thumb placement for some chords like jazz fingerings of F7 or Fmaj7 a bit cramped, at least for me. I wonder if this is supposed to be an aesthetic feature, or a structural enhancement, or....


Definitely a backstop for the first position.
A neck this heavy could be multifunctional. You could easily put one over the centerfield wall, lever your car out of a ditch, defend yourself in a bar fight,.etc.
No simple guitar stand fall is going to take the head off.
Unfortunately, but not surprisingly, the truss rod is utterly powerless against the will of the Rosewood ( even after you make the special length tool to reach it [uncle] ).

Author:  david farmer [ Mon Jun 05, 2017 10:39 am ]
Post subject:  Re: Volute of the day

sdsollod wrote:
Very elaberate. Nicely done. May not be for everyone, but obviously a lot of work went into that. Could we see the rest of the guitar?


http://www.nbnguitars.com/

Started by folks who worked at Ode Banjo's.
1967 (In case you thought bolt on necks originated with Bob Taylor.)
Attachment:
guitaraficianado.jpg

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/