Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 2:51 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Fri Dec 22, 2017 12:39 pm 
Offline
Koa
Koa

Joined: Fri Feb 10, 2017 11:09 pm
Posts: 870
Location: Cowichan Valley, BC, Canada
First name: Conor
Last Name: Searl
City: Duncan
State: British Columbia
Zip/Postal Code: V9L 2E5
Country: Canada
Status: Semi-pro
I know polish with silicon is a big no no. But I can't find any info on the Dunlop stuff online. The polish seems innocuous enough. Same thing with the lemon oil, (I've heard conflicting ideas about using it for cleaning fretboards). What do you all use for cleaning guitars?


Top
 Profile  
 
PostPosted: Fri Dec 22, 2017 12:49 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur
naptha

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon


Top
 Profile  
 
PostPosted: Fri Dec 22, 2017 2:11 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Lemon oil (until it runs out, and then I'll get some Howard Feed'n'Wax).
And Roland makes a detail polish that is amazing! It takes off that hazy crud on old lacquer finished guitars like a champ. It made me a believer.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Fri Dec 22, 2017 2:14 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12971
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
I've used Dunlap "65" polish on over 5,000 guitars with never an issue.

For fret boards that are not maple, use naphtha on maple boards, we like Howard Feed-n-wax.

_________________
Ann Arbor Guitars


Top
 Profile  
 
PostPosted: Fri Dec 22, 2017 6:21 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3227
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
I like the Stew-Mac polish. They state that it contains no silicone. I use mineral spirits for cleaning fretboards then follow up with Tre-Wax.


Top
 Profile  
 
PostPosted: Fri Dec 22, 2017 9:51 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2124
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
Damp rag for the body, 0000 steel wool for the fretboard. I think that putting oil on a fretboard is like putting ArmorAll on your car tyres - it makes them all shiny and black and is totally unnecessary. Martin specifically recommended not using it on nitro finished guitars, I finish with nitro, I don't use it. Your mileage may vary.



These users thanked the author Freeman for the post: Haans (Sat Dec 23, 2017 10:34 am)
Top
 Profile  
 
PostPosted: Sat Dec 23, 2017 5:48 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12971
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Wanted to add that water is indeed a very good way to lift heavy dirt.

But what I really wanted to add is be careful on exceptionally dirty guitars. You can make them worse with polish and then have to spend hours with heavier duty cleaners to remove the smears that you created. On really dirty guitars I tell the steward that I'm not cleaning it or they are agreeing to paying time and materials at the rate of this $85 an hour. That usually gets me out out of it...:)

Lastly be careful who's guitar you clean. I cleaned a guitar for a famous, star player and he got pissed because he wanted it to be all dirty on his album cover picture that was being taken the next day. Who knew....;)

_________________
Ann Arbor Guitars


Top
 Profile  
 
PostPosted: Sat Dec 23, 2017 11:33 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2124
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
Hesh wrote:
Lastly be careful who's guitar you clean. I cleaned a guitar for a famous, star player and he got pissed because he wanted it to be all dirty on his album cover picture that was being taken the next day. Who knew....;)


I actually had a case like that - the guy wasn't famous or anything but his fretboard was just covered in nasty stuff. I told him I would clean that off and polish the frets - he said "don't you dare, that's part of my sound"

And if you try to polish an old cracked nitro finish all you do is get polish in the cracks and make them stand out.


Top
 Profile  
 
PostPosted: Sat Dec 23, 2017 1:47 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12971
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Freeman wrote:
Hesh wrote:
Lastly be careful who's guitar you clean. I cleaned a guitar for a famous, star player and he got pissed because he wanted it to be all dirty on his album cover picture that was being taken the next day. Who knew....;)


I actually had a case like that - the guy wasn't famous or anything but his fretboard was just covered in nasty stuff. I told him I would clean that off and polish the frets - he said "don't you dare, that's part of my sound"

And if you try to polish an old cracked nitro finish all you do is get polish in the cracks and make them stand out.


LOL that's part of his sound, dirt!!! ;)

On really gunked up fret boards I scrape them with a single edged razor blade and I've been doing it for years now so I can avoid chatter. It makes fast removal of the worst finger jam and then I hit the board and frets with OOOO steel wool (tape off the pups if an electric) and the OOOO steel wool gives it a more homogenized look with the shiny frets. Works great but we have to watch out for the slobs that like their dirt..;)

Merry Christmas, Happy Holidays Freeman my friend!

_________________
Ann Arbor Guitars


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com