Official Luthiers Forum!
http://luthiersforum.com/forum/

From wall hanger to player
http://luthiersforum.com/forum/viewtopic.php?f=10137&t=50598
Page 1 of 1

Author:  Freeman [ Sun May 06, 2018 11:57 am ]
Post subject:  From wall hanger to player

A friend of a friend called me, "got an old Gibson with a broken neck, was told that if anyone could fix it you could". Ah, well, OK. Thinking it was just a normal broken Gibbie head I said "sure, bring it over"

Well, it turned out to be a 1978 (he says) Custom that was badly broken thru the heel, the neck was popped out of the cavity. Binding was broken off both sides. That would have been pretty straight forward but the owner decided to fix it, my guess is that he used water activated polyurethane, which happens to expand as it cures. I also doubt that he clamped the neck back into the pocket. It looked like this

Image

Image

Image

The good thing about gorilla glue is that it wasn't ever going to come apart. The bad thing about gorilla glue is that it wasn't going to come apart.

In addition, the neck geometry was now completely fubar

Image

And someone had removed the wiring with a pair of diagonal cutters

Image

To add insult to injury, the original Nashville ToM bridge had been lost so they jury rigged a cheap made in Korea ABR-1 style bridge to work by wrapping paper around the M4 threaded studs to make them fit in the M5 bushings

Image

Author:  Freeman [ Sun May 06, 2018 12:08 pm ]
Post subject:  Re: From wall hanger to player

The geometry was bad, but close enough that I figured it was worth a try. Some bondo (yes, Virginia, bondo) in the heel

Image

And some binding spliced into the old

Image

A few coats of black lacquer with some vintage amber on the binding

Image

Image

Image

The electronics were toast - the switch was intermitent, the pots were scratchy, when I tried to pull the knobs the shaft came out of one so I rewired with all new components

Image

I just happened to have the correct Nashville stud but I didn't have a vintage gold bridge so I put the POS one back in while we look for an old one

Image

Did a bunch of work on the truss rod and frets (they are the original kind with the plastic nibs) and got the action pretty reasonable. Took it inside, plugged it in and played it for the first time in a lot of years

Image

Image

Author:  johnparchem [ Sun May 06, 2018 1:58 pm ]
Post subject:  Re: From wall hanger to player

Nicely done. The guitar restoration looks good.

Author:  Chris Pile [ Sun May 06, 2018 2:33 pm ]
Post subject:  Re: From wall hanger to player

Of course, with all the damage - there was plenty of potential. Well done, sir!!!!

Author:  Ruby50 [ Sun May 06, 2018 5:09 pm ]
Post subject:  Re: From wall hanger to player

Great job Freeman - almost as good as new

Ed

Author:  dzsmith [ Sun May 06, 2018 5:42 pm ]
Post subject:  Re: From wall hanger to player

Are the frets original fretless-wonder style?
If so, thanks for not replscing them with jumbo’s.
Very well done!

Author:  Freeman [ Sun May 06, 2018 8:41 pm ]
Post subject:  Re: From wall hanger to player

dzsmith wrote:
Are the frets original fretless-wonder style?
If so, thanks for not replscing them with jumbo’s.
Very well done!


Yes, still have the nibs. I massaged them a little but kept them original.

Author:  B. Howard [ Mon May 07, 2018 5:39 am ]
Post subject:  Re: From wall hanger to player

Nice! I love a good save!

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/