Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 3:17 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 12 posts ] 
Author Message
PostPosted: Thu Nov 29, 2018 4:16 pm 
Offline
Walnut
Walnut
User avatar

Joined: Wed Nov 14, 2018 10:11 am
Posts: 8
Location: Philadelphia, PA
Focus: Repair
I've got an old Yamaha FG-300 on my bench and I'm not sure what to do with the pickguard. It's cracking, shrinking, and off-gassing. My inclination is to remove it, and order or make a replacement. But is there lacquer underneath? Does that matter?
The cracks rattle when you play it too, so if I don't remove the pickguard, how do I deal with the rattle? Flow some CA glue in the cracks?

Photos are here


Top
 Profile  
 
PostPosted: Thu Nov 29, 2018 8:05 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Dec 20, 2010 7:15 pm
Posts: 1041
First name: Gil
Last Name: Draper
City: Knoxville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
Interesting how much that pickguard has shrunk as is evident by the original outline on the top. I would get that thing off of there pronto before the off-gassing damages the top. I don't know how Yamaha attached their pickguards; rather they were glued on or attached with transfer adhesive, but either way I imagine it will come off easy with a thin spatula worked under it. The reason I think this is that if it was glued on and well attached, with that much shrinkage it would have cracked the top (like the common pickguard crack on vintage Martin guitars which have the pickguards glued on to the bare wood and finished over). Don't worry if there is finish underneath.


Top
 Profile  
 
PostPosted: Thu Nov 29, 2018 8:10 pm 
Offline
Koa
Koa

Joined: Wed Feb 17, 2016 8:54 am
Posts: 854
State: Texas
Country: United States
Focus: Repair
I'd definitely remove it and replace it with something less volatile. Before you do that you should cut out a paper template and add a few mm on the edges so you can make an accurate replacement that will cover the footprint of the old one.


Top
 Profile  
 
PostPosted: Thu Nov 29, 2018 8:34 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Feb 02, 2008 4:01 pm
Posts: 1104
Location: Winfield, IL.
Like Dan said, get that thing off of there before it does more damage. Careful with the heat, it is celluloid and will start on fire if you get it too hot. Terrapin Guitars has that shape on file but I don't know if they can do the engraving. I did one about a year ago and can't remember what was underneath. If it's raw wood, a few coats of shellac and your good to go for a new one with adhesive film.

Welcome to the forum.

Steve


Top
 Profile  
 
PostPosted: Fri Nov 30, 2018 9:22 am 
Offline
Walnut
Walnut
User avatar

Joined: Wed Nov 14, 2018 10:11 am
Posts: 8
Location: Philadelphia, PA
Focus: Repair
Thanks for everything!

I'm not worried about replicating the pickguard perfectly, it just needs to be functional. I feel fine ordering one from Terrapin.

If it's raw wood underneath, is there a shellac you recommend?


Top
 Profile  
 
PostPosted: Fri Nov 30, 2018 12:38 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Dec 20, 2010 7:15 pm
Posts: 1041
First name: Gil
Last Name: Draper
City: Knoxville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
Any shellac will do for this purpose. Zinsser seal coat from your local hardware/home store will work. Or you can mix your own with flake shellac and alcohol. Three or so light coats should do it. I get my flake shellac from shellacfinishes.net and mix with PGA.



These users thanked the author Goodin for the post: automattack (Fri Nov 30, 2018 2:58 pm)
Top
 Profile  
 
PostPosted: Fri Nov 30, 2018 2:59 pm 
Offline
Walnut
Walnut
User avatar

Joined: Wed Nov 14, 2018 10:11 am
Posts: 8
Location: Philadelphia, PA
Focus: Repair
Thanks so much!


Top
 Profile  
 
PostPosted: Tue Dec 11, 2018 9:31 am 
Offline
Walnut
Walnut
User avatar

Joined: Wed Nov 14, 2018 10:11 am
Posts: 8
Location: Philadelphia, PA
Focus: Repair
Got the pickguard off, here's what's underneath.

The part where the rosette is chewed up had different glue that didn't soften with a hairdryer. I had better results heating my spatula and chipping the pickguard away. I suspect someone before me used CA glue to secure the pickguard in that area.

My plan is to sand/scrape the old glue away, apply a few coats of varnish, then apply a new pickguard (I'm ordering one from Terrapin Guitars).


Image


Top
 Profile  
 
PostPosted: Wed Dec 12, 2018 9:26 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Dec 20, 2010 7:15 pm
Posts: 1041
First name: Gil
Last Name: Draper
City: Knoxville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
Sounds like a good plan. Your picture didn't load properly. At least I can't see it.


Top
 Profile  
 
PostPosted: Wed Dec 12, 2018 9:37 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7241
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Goodin wrote:
Sounds like a good plan. Your picture didn't load properly. At least I can't see it.


+1

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Wed Dec 12, 2018 10:05 am 
Offline
Walnut
Walnut
User avatar

Joined: Wed Nov 14, 2018 10:11 am
Posts: 8
Location: Philadelphia, PA
Focus: Repair
Goodin wrote:
Sounds like a good plan. Your picture didn't load properly. At least I can't see it.


Well, dang... I added it to the original album, it should be the last picture here: https://photos.app.goo.gl/zD7YMMrgV97Cawh5A


Top
 Profile  
 
PostPosted: Thu Dec 13, 2018 5:19 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Feb 29, 2008 2:41 pm
Posts: 312
All of those FG300s shed their pickguards like that. When you replace it, I'd suggest a significantly thinner one, less of a tone sink.

These go for stupid amounts of money...

_________________
https://soundcloud.com/jeffreylsuits/he ... -runnin-13


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com