Official Luthiers Forum!
http://luthiersforum.com/forum/

Making the Rosette
http://luthiersforum.com/forum/viewtopic.php?f=10146&t=48745		 Page 1 of 1
Author:  ericschaeferguitars [ Fri Dec 23, 2016 3:51 pm ]
Post subject:  Making the Rosette
Author:  truckjohn [ Sun Dec 25, 2016 8:47 pm ]
Post subject:  Re: Making the Rosette
Thanks for posting your process on this. I have struggled with how to do a good precise job on a wooden tiled rosette. Your process looks very straight forward.

Question - is your jig available commercially? That's a nice setup.

Thanks
Author:  ericschaeferguitars [ Mon Dec 26, 2016 2:09 pm ]
Post subject:  Re: Making the Rosette
truckjohn wrote:
Thanks for posting your process on this. I have struggled with how to do a good precise job on a wooden tiled rosette. Your process looks very straight forward.

Question - is your jig available commercially? That's a nice setup.

Thanks


Yes, it is. I sell it as a kit with a book, and some materials. http://www.ericschaeferguitars.com/the-radial-rosette-maker-kit/

Stewart Macdonald, also will be coming out with their version sometime in 2017. From when I last spoke to them it sounded like Spring.
Author:  truckjohn [ Sat Jan 07, 2017 1:46 pm ]
Post subject:  Re: Making the Rosette
I followed your basic directions on a multi-piece rosette for my 2016 OLF challenge build. It works very well. I appreciate your jig even more now. It would probably have taken me well under half the time with the jig...
Author:  ericschaeferguitars [ Sun Jan 08, 2017 1:17 am ]
Post subject:  Re: Making the Rosette
truckjohn wrote:
I followed your basic directions on a multi-piece rosette for my 2016 OLF challenge build. It works very well. I appreciate your jig even more now. It would probably have taken me well under half the time with the jig...


Glad to hear it, John! Post a picture or a link to the forum page if it's already on the forum elsewhere.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/