Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 9:46 am


All times are UTC - 5 hours





Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 41 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Sat May 17, 2008 10:00 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
LANCE'S FRESH HOT DONUTS!

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
PostPosted: Sat May 17, 2008 12:09 pm 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Image


NOW THAT I HAVE YOUR ATTENTION! bliss

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
PostPosted: Sat May 31, 2008 7:14 pm 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Williams Binding jig.
Brand new never used

350.00 SOLD paid



Woolson Neck jig. Used one time, complete. including a brand new set of plans to go with.
350.00 SOLD

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
PostPosted: Mon Jun 02, 2008 8:46 am 
Offline
Contributing Member
Contributing Member

Joined: Wed Feb 02, 2005 3:14 am
Posts: 2590
Location: United States
Lance Kragenbrink wrote:
Williams Binding jig.
Brand new never used

350.00



Woolson Neck jig. Used one time, complete. including a brand new set of plans to go with.
350.00


Lance, doncha' like the neck jig? Or have you developed a nuclear solution? :D

_________________
http://www.presnallguitars.com


Top
 Profile  
 
PostPosted: Mon Jun 02, 2008 8:58 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
The jig is great! just never use it. :?

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
PostPosted: Mon Jun 02, 2008 9:05 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4777
Lance, does the binding machine mount a PC 310?


Top
 Profile  
 
PostPosted: Mon Jun 02, 2008 9:08 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12971
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
James buddy that is a rather personal question......... laughing6-hehe

I have a PC-310 mounted on my Williams jig........ :D I think that this is the best binding channel solution going these days - highly recommended! [:Y:]

_________________
Ann Arbor Guitars


Top
 Profile  
 
PostPosted: Mon Jun 02, 2008 9:10 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
James Orr wrote:
Lance, does the binding machine mount a PC 310?

Hi James,

Yes ;)

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
PostPosted: Mon Jun 02, 2008 9:37 am 
Offline
Contributing Member
Contributing Member

Joined: Wed Feb 02, 2005 3:14 am
Posts: 2590
Location: United States
Ok Lance, I'm checking the books to see if I can do the neck jig...I'm outfitting the new shop and I still have a few things in line ahead of it...

_________________
http://www.presnallguitars.com


Top
 Profile  
 
PostPosted: Mon Jun 02, 2008 12:22 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4777
lol, you guys are awesome.

Lance, I'll take the binding jig!


Top
 Profile  
 
PostPosted: Mon Jun 02, 2008 12:30 pm 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Sounds great James!
Ill pack it up and get you a total with shipping!

Thanks!

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
PostPosted: Mon Jun 02, 2008 12:44 pm 
I see glazed; got any jellies?


Top
  
 
PostPosted: Mon Jun 02, 2008 7:29 pm 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Here ya go Andrew!

Image

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
PostPosted: Thu Jun 05, 2008 3:00 pm 
Lance Kragenbrink wrote:
Here ya go Andrew!

Image


SWEET, I'll take a baker's dozen! Swap ya fer a bucket'o'lard? :lol:


Top
  
 
PostPosted: Fri Jun 06, 2008 7:19 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
NEW GOODIES

I have searched the shelves and found a few cast offs, stuff I would not be using but thought that
maybe, just maybe someone could find a use, even if just for scrap wood.

First up a orphan set of Koa sides, cutaway was bent to my OMFS body, but has opened up quite a bit.
There are thin spots, and some warping, but with some effort could be made usable.
Good for making bindings and or headplates at the very least.

50.00 or make an offer.

REDUCED TO 25.00. SOLD TO WES


You do not have the required permissions to view the files attached to this post.

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
PostPosted: Fri Jun 06, 2008 7:23 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
A prototype boat.
I made this back and side boat about 5 years ago, it was one of three that I made while developing my E2
model. There is one small area in the inside lower bout where it stalled under the sander and its a little thin,
but very stable. End Graft slot is cut for a standard width binding 1/4"
Slap a top on it and your on your way!

Master Grade East Indian

100.00 or will entertain trade offers SOLD LAURIE


You do not have the required permissions to view the files attached to this post.

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
PostPosted: Fri Jun 06, 2008 7:27 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Box of 10 sets of D'Addario EJ17 Mediums
Phosphor Bronze.

Retail 59.99
Will sell for 30.00 SOLD to PETER


You do not have the required permissions to view the files attached to this post.

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
PostPosted: Fri Jun 06, 2008 7:33 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Box of 10 sets of D'Addario EXP 80/20 Bronze Acoustic Strings Mediums



Will sell for 50.00 SOLD


You do not have the required permissions to view the files attached to this post.

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
PostPosted: Fri Jun 06, 2008 7:35 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Inlaid fretboard.
Off Ebay

50.00 SOLD KEN HODGES


You do not have the required permissions to view the files attached to this post.

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
PostPosted: Fri Jun 06, 2008 7:40 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Old cracked Cocobolo rim set. OMFS style
Pretty rough shape, maybe good for scrap wood parts.
Maybe someone could rescue it?
I have a back that (may) fit it that I will toss in for free.

25.00 SOLD JIMW


You do not have the required permissions to view the files attached to this post.

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
PostPosted: Fri Jun 06, 2008 7:45 am 
Lance Kragenbrink wrote:
Box of 10 sets of D'Addario EXP 80/20 Bronze Acoustic Strings Mediums



Will sell for 50.00


I'll take these ten Lance! [:Y:]

You got it Andrew!


Top
  
 
PostPosted: Fri Jun 06, 2008 8:09 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
You got it Andrew!

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
PostPosted: Fri Jun 06, 2008 9:32 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun May 13, 2007 10:28 pm
Posts: 404
Location: Clermont, FL
Focus: Build
Lance, I'll take a chance on the Cocobolo rim set and back, thanks.

_________________
Jim Womack

"Be thankful we're not getting all the government we're paying for. "
Will Rogers


Top
 Profile  
 
PostPosted: Fri Jun 06, 2008 10:26 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 01, 2007 3:15 pm
Posts: 2302
Location: Florida
I'll take the inlaid fretboard for $50

_________________
Reguards,

Ken H


Top
 Profile  
 
PostPosted: Fri Jun 06, 2008 10:35 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Ken fretboard is yours

JimW Coco rim set + back is yours

Thanks!

I will get totals on everything with shipping ASAP

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 41 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com