Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Mar 29, 2024 8:51 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Me make clamps
PostPosted: Wed Apr 06, 2011 7:46 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 21, 2008 8:57 pm
Posts: 1982
Location: 8.33±0.35 kpc from Galactic center, 20 light-years above the equatorial in the Sol System
First name: duh
Last Name: Padma
City: Professional Sawdust Maker
Focus: Build
See...clamps

Image

Fifteen....another fifteen to go, but not today.


blessings
duh Padma

_________________
.

Audiences and dispensations on Thursdays ~ by appointment only.



.


Top
 Profile  
 
 Post subject: Re: Me make clamps
PostPosted: Thu Apr 07, 2011 7:36 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Sep 24, 2009 9:50 am
Posts: 941
Location: Ellicott City, Md - USA
First name: John
Last Name: A
Focus: Build
Status: Amateur
I am afraid to ask - what for ?

_________________
It's this new idea from recent decades that everyone gets a participation award. - MUX


Top
 Profile  
 
 Post subject: Re: Me make clamps
PostPosted: Thu Apr 07, 2011 10:38 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 21, 2008 8:57 pm
Posts: 1982
Location: 8.33±0.35 kpc from Galactic center, 20 light-years above the equatorial in the Sol System
First name: duh
Last Name: Padma
City: Professional Sawdust Maker
Focus: Build
John A wrote:
I am afraid to ask - what for ?



Gee John,

Don't be afraid...me glad you did ask...you see, me grow them little pear shaped Italian
tomatoes which make A1 first class sauce for me anchovy and onion Pizzas and so me use the clamps to squash the tomatoes to make the sauce.

Now John, arn't you glad you asked.

pizza


blessings
duh Padma

_________________
.

Audiences and dispensations on Thursdays ~ by appointment only.



.


Top
 Profile  
 
 Post subject: Re: Me make clamps
PostPosted: Fri Apr 08, 2011 12:03 pm 
Offline
Koa
Koa

Joined: Sat Apr 19, 2008 10:08 pm
Posts: 1958
Location: Missouri
First name: Patrick
Last Name: Hanna
State: Missouri
Country: USA
Hey, Padma,
I don't see any pivot inserts in the jaws of your home-made hand screws. How do you manage to adjust the jaws so far out-of-parallel without pivots for the screws?


Top
 Profile  
 
 Post subject: Re: Me make clamps
PostPosted: Fri Apr 08, 2011 3:41 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 21, 2008 8:57 pm
Posts: 1982
Location: 8.33±0.35 kpc from Galactic center, 20 light-years above the equatorial in the Sol System
First name: duh
Last Name: Padma
City: Professional Sawdust Maker
Focus: Build
cphanna wrote:
Hey, Padma,
I don't see any pivot inserts in the jaws of your home-made hand screws. How do you manage to adjust the jaws so far out-of-parallel without pivots for the screws?



Your right,

there aren't any and the trick is to not let the jaws get too far out of parallel.

You start with the clamping jaw slightly wider than what your gonna clamp, then close it down and open up the back screw which acts as a lever on the jaws. Just a turn or two will create tremendous clamping pressure.

I think it was Jorgensen that came up with the new fangeld modern pivot insert you are referring to as a modification of this much older and simpler design thats been around for at least a millennium or so.

These clamps cost me a total of $50 to make compared to $15 each for the smallest 4" Jorgensen and they work just as good. Thats like way over $500 with sales taxes and shipping. Now with taxes in Canada running at 70%, me would have to earn $1,600 to own 30 Jorgensen camps. NOT!

Next me gonna be making about 30 small cam clamps, but not today.


Blessing
duh Padma

_________________
.

Audiences and dispensations on Thursdays ~ by appointment only.



.


Top
 Profile  
 
 Post subject: Re: Me make clamps
PostPosted: Fri Apr 08, 2011 5:12 pm 
Offline
Koa
Koa

Joined: Sat Apr 19, 2008 10:08 pm
Posts: 1958
Location: Missouri
First name: Patrick
Last Name: Hanna
State: Missouri
Country: USA
Yo again, Padma,
I understand what you're saying about the "trick." Couple more questions, please. Did you also make a home-made thread box and tap to make these wooden screws? And if so, would you put up a picture of those tools at your convenience? I know I can find plans and photos in lots of places on the web. I'm just curious to know how The Padma goes about these things.
Thanks. And whatever you're doing, press on.
Blessings,
Patrick


Top
 Profile  
 
 Post subject: Re: Me make clamps
PostPosted: Fri Apr 08, 2011 5:38 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 21, 2008 8:57 pm
Posts: 1982
Location: 8.33±0.35 kpc from Galactic center, 20 light-years above the equatorial in the Sol System
First name: duh
Last Name: Padma
City: Professional Sawdust Maker
Focus: Build
The die and tap come outa the Orient some wears and is commonly available from the big box and on line tool type stores for around $45 and up. I borrowed one from buddie. The thread sizes commonly available are
1/2; 3/4; 1; 1 1/4; and 1 1/2.

The 2 larger sizes are somewhat harder to find but make good vises.

I have made successful vices from 1/2 inch threaded dowel and is excellent for this type of clamp.

Don't bother buying dowelling from the box stores...they say its hard maple and thats a crock of doo doo droppings. The harder the wood with a cross grain the better. Go here, read what Steve Stevens had to say about threading dowel.

http://www.luthiercom.org/phpBB3/viewtopic.php?f=42&t=2579&p=43116#p43116

And here is the link to the plans that I used. Like, is a real no brainer.

http://lumberjocks.com/projects/9830


blessings
duh Padma

_________________
.

Audiences and dispensations on Thursdays ~ by appointment only.



.


Top
 Profile  
 
 Post subject: Re: Me make clamps
PostPosted: Fri Apr 08, 2011 5:49 pm 
Offline
Koa
Koa

Joined: Sat Apr 19, 2008 10:08 pm
Posts: 1958
Location: Missouri
First name: Patrick
Last Name: Hanna
State: Missouri
Country: USA
Thanks, my friend. I will now do some reading.


Top
 Profile  
 
 Post subject: Re: Me make clamps
PostPosted: Sat Apr 09, 2011 1:28 am 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 21, 2008 8:57 pm
Posts: 1982
Location: 8.33±0.35 kpc from Galactic center, 20 light-years above the equatorial in the Sol System
First name: duh
Last Name: Padma
City: Professional Sawdust Maker
Focus: Build
Image
screw box, showing the alignment guide

Image
The screw box, showing the cutter and the bolts for adjusting it

hand made in Rwanda


Here is a link to a more spiffed up design of parallel jaw clamp. But it definably needs a lathe. Well guess a wood butcher could figure out how to get around that. Wish me had seen this design before I made the ones I did. But me still happy.

Image

_________________
.

Audiences and dispensations on Thursdays ~ by appointment only.



.


Top
 Profile  
 
 Post subject: Re: Me make clamps
PostPosted: Sat Apr 09, 2011 6:43 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 9:42 pm
Posts: 4216
Location: Buffalo, NY
First name: Robert
Last Name: Cefalu
City: Buffalo
State: NY
Zip/Postal Code: 14217
Country: US
the Padma wrote:
Image
screw box, showing the alignment guide

Image
The screw box, showing the cutter and the bolts for adjusting it

hand made in Rwanda


Here is a link to a more spiffed up design of parallel jaw clamp. But it definably needs a lathe. Well guess a wood butcher could figure out how to get around that. Wish me had seen this design before I made the ones I did. But me still happy.

Image


Padma that looks older 'n you. laughing6-hehe

_________________
Beautiful and unusual tone woods at a reasonable price.
http://www.rctonewoods.com/RCT_Store
The Zootman
1109 Military Rd.
Kenmore, NY 14217
(716) 874-1498


Top
 Profile  
 
 Post subject: Re: Me make clamps
PostPosted: Sat Apr 09, 2011 11:13 am 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 21, 2008 8:57 pm
Posts: 1982
Location: 8.33±0.35 kpc from Galactic center, 20 light-years above the equatorial in the Sol System
First name: duh
Last Name: Padma
City: Professional Sawdust Maker
Focus: Build
Bobc wrote:

Padma that looks older 'n you. laughing6-hehe


Yo, Bob,

They do, I'd guess they be closer to your age old feller, maybe even older.

Truth is, me really happy to come across this pic, See any machines can knock out a tap
but a good rod threader is trickier to make than most think ~ and just like us old "good" old guys, are getting harder to find.


blessings

_________________
.

Audiences and dispensations on Thursdays ~ by appointment only.



.


Top
 Profile  
 
 Post subject: Re: Me make clamps
PostPosted: Sat Apr 09, 2011 11:26 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 9:42 pm
Posts: 4216
Location: Buffalo, NY
First name: Robert
Last Name: Cefalu
City: Buffalo
State: NY
Zip/Postal Code: 14217
Country: US
the Padma wrote:
Bobc wrote:

Padma that looks older 'n you. laughing6-hehe


Yo, Bob,

They do, I'd guess they be closer to your age old feller, maybe even older.

Truth is, me really happy to come across this pic, See any machines can knock out a tap
but a good rod threader is trickier to make than most think ~ and just like us old "good" old guys, are getting harder to find.


blessings


Yep your right about that. I remember clamps like that when I was in high school shop. Worked just fine.

_________________
Beautiful and unusual tone woods at a reasonable price.
http://www.rctonewoods.com/RCT_Store
The Zootman
1109 Military Rd.
Kenmore, NY 14217
(716) 874-1498


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com