Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 4:24 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Fri Nov 02, 2012 5:46 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Mar 04, 2008 10:55 pm
Posts: 404
Location: Dallas, Texas
Hi Guys,

I have decided to buy a personal CNC Milling machine specifically for milling aluminum.
My choices so far.
The Tormach PCNC 1100 or the Smithy 1240 CNC Bedmill. Cost is close to the same. 12K vs 13K

I know these are Chinese made but they are within my next year budget.

So anyone with experience with either of these machines?

I could probly find a used Bridgeport for this price but then I need a rotary phase converter and my Ceiling is not tall enough,as well as getting the BP in the door would prove a real chore at best.

Mike

_________________
I'm outside looking in, just farther from the window than most.


Top
 Profile  
 
PostPosted: Fri Nov 02, 2012 6:42 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jun 12, 2008 6:59 am
Posts: 1963
Location: Rochester Michigan
I've got a bud with a Tormach and he's pretty satisfied with it. Says he can climb cut steel with it pretty much no problem.

Something to consider - I can climb cut aluminum on my router and it's got a 24x36" table.... The Tormach is in another league of stiffness compared to my router but, if Aluminum's all you want to cut...

_________________
http://www.birkonium.com CNC Products for Luthiers
http://banduramaker.blogspot.com


Top
 Profile  
 
PostPosted: Fri Nov 02, 2012 9:59 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Mar 04, 2008 10:55 pm
Posts: 404
Location: Dallas, Texas
Andy Birko wrote:
I've got a bud with a Tormach and he's pretty satisfied with it. Says he can climb cut steel with it pretty much no problem.

Something to consider - I can climb cut aluminum on my router and it's got a 24x36" table.... The Tormach is in another league of stiffness compared to my router but, if Aluminum's all you want to cut...
I get you on that. I can mill aluminum on my router as well, It just is not what I need. I mean I mill 1/8" AL all the time and sometimes up to 3/8", but I really need something a little more substantial without breaking the bank. :)
MK

_________________
I'm outside looking in, just farther from the window than most.


Top
 Profile  
 
PostPosted: Sat Nov 03, 2012 9:40 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue May 02, 2006 9:02 am
Posts: 2351
Location: Canada
First name: Bob
Last Name: Garrish
City: Toronto
State: Ontario
Country: Canada
Status: Professional
A buddy of mine has a Tormach and he's really happy with it. His machine decision was sort of 'in my hands' and I think that if you're looking for support and a known value for what you're getting then the Tormach products are great. I do all his programming and he's done lots of stuff running from wood up through aluminum and stainless on it and he said so long as he takes his time with it the results are great.

_________________
Bob Garrish
Former Canonized Purveyor of Fine CNC Luthier Services


Top
 Profile  
 
PostPosted: Sat Nov 03, 2012 9:54 am 
Offline
Cocobolo
Cocobolo

Joined: Tue Mar 04, 2008 10:55 pm
Posts: 404
Location: Dallas, Texas
So far I have heard nothing but Good about the Tormach Thanks Andy and Bob, both of you have supported what I keep hearing. The Tormach also appears to be better supported as well.

I have yet to find anyone who has experience with the 1240 Smithy?

I hope to find someone local that I can may be actually see the machines in action .

mk

_________________
I'm outside looking in, just farther from the window than most.


Top
 Profile  
 
PostPosted: Sat Nov 03, 2012 12:14 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jan 15, 2010 3:34 pm
Posts: 2047
First name: Stuart
Last Name: Gort
Country: USA
Focus: Build
Status: Semi-pro
Let them eat chips.

_________________
I read Emerson on the can. A foolish consistency is the hobgoblin of little minds...true...but a consistent reading of Emerson has its uses nevertheless.

StuMusic


Top
 Profile  
 
PostPosted: Sat Nov 03, 2012 1:22 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jun 12, 2008 6:59 am
Posts: 1963
Location: Rochester Michigan
Zlurgh wrote:
Let them eat chips.


:lol:

_________________
http://www.birkonium.com CNC Products for Luthiers
http://banduramaker.blogspot.com


Top
 Profile  
 
PostPosted: Sat Nov 03, 2012 3:31 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Mar 04, 2008 10:55 pm
Posts: 404
Location: Dallas, Texas
Andy Birko wrote:
Zlurgh wrote:
Let them eat chips.


:lol:
Exactly!! laughing6-hehe

_________________
I'm outside looking in, just farther from the window than most.


Top
 Profile  
 
PostPosted: Sat Nov 03, 2012 9:54 pm 
Offline
Cocobolo
Cocobolo

Joined: Mon Mar 03, 2008 6:51 pm
Posts: 488
Tormach sure has a lot of cool accessories on their site.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com