Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 7:17 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Wed Jan 02, 2013 2:46 am 
Offline
Cocobolo
Cocobolo

Joined: Mon Dec 31, 2012 11:28 am
Posts: 106
First name: Rienk
Last Name: Ayers
City: Santa Maria
State: California
Country: USA
Focus: Build
Status: Amateur
Chris, I'm not familiar with this tool... where can I find a link for it's use?

If I end up building one, I might be able to do a second set, if you'll pick up the shipping (no promise as to when I can get to it).

Thanks!


Top
 Profile  
 
PostPosted: Sun Jan 20, 2013 11:01 am 
Offline
Walnut
Walnut

Joined: Sun Jan 06, 2013 11:25 pm
Posts: 3
First name: Steven
Focus: Build
Status: Amateur
Well I used Chris' Rhino plans to make my own version of this. Built from mainly red oak and basswood and with the end walls built at 4" to accommodate thicker bodies if needed. This doesn't do justice to Filippo's gorgeous version, but for a jig it is functional.

Without further delay, here are the photos:

Image

Image

Image

Image

Image

Image

Image


Top
 Profile  
 
PostPosted: Wed Nov 20, 2013 2:50 am 
Offline
Mahogany
Mahogany

Joined: Wed Oct 09, 2013 8:55 am
Posts: 55
Location: Kaboutersem
First name: Hilko
Last Name: Nackaerts
Country: Belgium
Focus: Build
Many thanks for posting this jig! I'm building one.
Respect!

_________________
FB Page


Top
 Profile  
 
PostPosted: Wed Nov 20, 2013 9:23 am 
Offline
Cocobolo
Cocobolo

Joined: Mon Dec 31, 2012 11:28 am
Posts: 106
First name: Rienk
Last Name: Ayers
City: Santa Maria
State: California
Country: USA
Focus: Build
Status: Amateur
verhoevenc wrote:
I also have ~8 of these built and for sale now-a-days too.
Chris


Yeah, I'm glad someone finally built some (10 months later :)
What did you end up doing for clamps?
Do you have pictures to post?


Top
 Profile  
 
PostPosted: Wed Nov 20, 2013 4:23 pm 
Offline
Cocobolo
Cocobolo

Joined: Mon Dec 31, 2012 11:28 am
Posts: 106
First name: Rienk
Last Name: Ayers
City: Santa Maria
State: California
Country: USA
Focus: Build
Status: Amateur
verhoevenc wrote:
I've had them done for MONTHS. Even sold a couple on here. Check the classifieds section for answers to all your questions. Also check the video tuts section for the video I made on using this (as well as other methods).
Chris


I figured as much - I just only have this thread to notify me about this particular topic/product.
Glad you did them!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com