Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 6:19 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 61 posts ]  Go to page 1, 2, 3  Next
Author Message
PostPosted: Tue Jan 08, 2013 12:09 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
I'm lucky enough to have a fairly complete cabinetry shop, so I will mostly have to start making jigs, purchase some fretting tools, and get serious about R.H. control. As it stands, I will be building from the OLF medium jumbo plans, with materials as follows:

B&S - Birdseye Black Limba
Top - Sitka, or Bearclaw Sitka
Bracing - Sitka
Neck - Roasted maple with accents
FB - Bocote
Bridge & Headplate - Braz. Rosewood
Bindings - ?
Nothing is really written in stone, here. If anyone sees any issues with this combination, let me know! A big thanks to Wud for setting this up! [clap] This is just the kick in the pants that I needed!

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
PostPosted: Tue Jan 08, 2013 2:57 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Dec 21, 2012 11:52 am
Posts: 1388
First name: Zeke
Last Name: McKee
City: Goodlettsville
State: TN
Zip/Postal Code: 37070
Country: United States
Focus: Build
Status: Amateur
Ok I live the look of black limba, but I have never seen Birdseye black limba. I can't wait to see what it looks like!


Top
 Profile  
 
PostPosted: Tue Jan 08, 2013 3:24 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
I bought it on ebay a couple of years ago for $15.50 I'll try to get some pictures of my wood selections posted soon.

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
PostPosted: Tue Jan 08, 2013 5:41 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Jul 31, 2010 4:03 pm
Posts: 158
First name: Neil
Last Name: Kwak
State: PA
Country: United States
Focus: Build
Status: Amateur
Good luck! My first build is an OLF medium jumbo (red cedar over Honduran mahogany with EIR trim and a 5-piece hog/maple/walnut/maple/hog neck) and I even made my own molds and forms. It's an odd mix of big and small but the body is huge - deep as a dreadnought but the waist is slimmer than an OM - and the tap tone of the box is thunderous even with a cedar top. One modification that somebody suggested to me was to widen the angle of the X brace to 100 degrees.

I have no idea what the characteristics are of the tonewoods that you chose but I'm sure you're going to enjoy the process as the guitar comes together.


Top
 Profile  
 
PostPosted: Tue Jan 08, 2013 6:04 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
Attachment:
P1020271.JPG
Attachment:
P1020272.JPG
Attachment:
P1020270.JPG
Attachment:
P1020274.JPG


You do not have the required permissions to view the files attached to this post.

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
PostPosted: Tue Jan 08, 2013 7:11 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Dec 21, 2012 11:52 am
Posts: 1388
First name: Zeke
Last Name: McKee
City: Goodlettsville
State: TN
Zip/Postal Code: 37070
Country: United States
Focus: Build
Status: Amateur
Thats some good looking wood. I like it.


Top
 Profile  
 
PostPosted: Tue Jan 08, 2013 11:19 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Dec 30, 2012 10:04 pm
Posts: 712
First name: Doug
Last Name: Balzer
City: Calgary
State: Alberta
Country: Canada
Focus: Build
Status: Semi-pro
Alex Kleon wrote:
. As it stands, I will be building from the OLF medium jumbo plans, with materials as follows:Alex


Alex, what do you mean by the OLF plans? Where are these to be found? I'm thinking this might be a dumb question but then again there are no dumb questions.

Doug

_________________
Doug

Don't let fear or common sense stop you from trying to build something


Top
 Profile  
 
PostPosted: Wed Jan 09, 2013 5:05 am 
Offline
Walnut
Walnut

Joined: Sat Nov 17, 2012 1:29 pm
Posts: 3
City: Auckland
Country: New Zealand
Focus: Build
Status: Amateur
Hi Alex, congrats on leaping in, your wood looks really good

I'm not in the race but I am watching with interest - obviously this thread is a great idea. Congratulations to all those people who are having a go at this.

Seeing the question about plans I will venture to offer one piece of advice to anyone starting down this path...

If you are not building from a kit, (and maybe even if you are, if lots of it is not preformed or shaped) then get yourself (or draw yourself) a proper, scaled or preferably 1:1 plan of everything you are going to build BEFORE you start cutting any wood.

In addition to the excellent OLF plans, which you can find a link to on this site, there are lots of guitar and uke plans out there, Christophe Grellier (OLF forum member and awesome luthier) from France has some excellent plans on his website and if you search this or other forums you will find them.

If you want to make yours one of a kind, do the customisation first with a paper and pencil, not your only set of tonewood.

Good luck Alex , I am really looking forward to seeing the results -

Cheers
Richard


Top
 Profile  
 
PostPosted: Wed Jan 09, 2013 6:42 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Dec 30, 2012 10:04 pm
Posts: 712
First name: Doug
Last Name: Balzer
City: Calgary
State: Alberta
Country: Canada
Focus: Build
Status: Semi-pro
RichardF wrote:

If you are not building from a kit, (and maybe even if you are, if lots of it is not preformed or shaped) then get yourself (or draw yourself) a proper, scaled or preferably 1:1 plan of everything you are going to build BEFORE you start cutting any wood.

Richard


Rest assured Richard, I am using full scaled drawings for my build (Acoustic Bass)....i may be dumb but i'm not stupid. ;). I was simply wondering where these OLF plans are to be found on this site. I have looked but cannot find them.

_________________
Doug

Don't let fear or common sense stop you from trying to build something


Top
 Profile  
 
PostPosted: Wed Jan 09, 2013 7:49 am 
Offline
Contributing Member
Contributing Member

Joined: Wed Jan 03, 2007 3:37 am
Posts: 116
Location: United Kingdom
dbalzer wrote:
RichardF wrote:

If you are not building from a kit, (and maybe even if you are, if lots of it is not preformed or shaped) then get yourself (or draw yourself) a proper, scaled or preferably 1:1 plan of everything you are going to build BEFORE you start cutting any wood.

Richard


Rest assured Richard, I am using full scaled drawings for my build (Acoustic Bass)....i may be dumb but i'm not stupid. ;). I was simply wondering where these OLF plans are to be found on this site. I have looked but cannot find them.



Hi Doug

You can't download them from the forum but you can buy the OLF plans from StewMac they are here: http://www.stewmac.com/Shopping?actn=search&keyword=olf+plans&x=22&y=11

All the best
Dave

_________________
To be someone must be a wonderful thing!


Top
 Profile  
 
PostPosted: Wed Jan 09, 2013 8:02 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
Hi Doug - You can get the OLF plans from Stewmac. http://www.stewmac.com/shop/Books,_plan ... xsr=140062 There are other plans available as well. They have a lot of detail, and being on four separate sheets is great, but DON'T assume that anything is measured exactly to scale!
If you are going to order from Stewmac, get everything you need from them at once - the shipping to Canada is murderous! I am looking forward to following everyones builds. It is pretty much a given that we are all going to make mistakes both large and small, but that is part of the learning process, so lets share so that we can all learn from them!
Two pieces of advice that I would give: don't touch a tool if you are tired or distracted, and assume that even the most benign tool has the ability to injure you badly.

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
PostPosted: Wed Jan 09, 2013 9:18 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Dec 30, 2012 10:04 pm
Posts: 712
First name: Doug
Last Name: Balzer
City: Calgary
State: Alberta
Country: Canada
Focus: Build
Status: Semi-pro
Good advice Alex. I have learned from furniture building over the years the same. Being in a good frame of mind leads to great craftsmanship. This is not the place to take one's frustrations out on...as might happen on the basketball court, the ice rink or shopping with the wife.

_________________
Doug

Don't let fear or common sense stop you from trying to build something


Top
 Profile  
 
PostPosted: Wed Jan 09, 2013 9:22 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
Good to see you jumping in Alex! Nice looking wood as well. I would go with that bear claw top since the back and side wood is not extremely flashy. But that is just what I would do. As for binding....that is always a tough choice for me. I like to have a bunch of different bindings on hand so I can look at the combinations before choosing, but that is not always an option. However, since you are using BRW for the bridge and head plate, maybe BRW bindings would be a good choice? They would also be an expensive choice.

_________________
http://www.CostaGuitars.com
PMoMC


Top
 Profile  
 
PostPosted: Wed Jan 09, 2013 9:45 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Oct 07, 2010 5:28 pm
Posts: 687
First name: Casey
Last Name: Cochran
City: Gainesville
State: GA
Zip/Postal Code: 30501
Country: USA
Focus: Build
I like the bearclaw top, too.

_________________
Good judgement comes from experience. Experience comes from poor judgement.


Top
 Profile  
 
PostPosted: Wed Jan 09, 2013 9:47 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
Tony_in_NYC wrote:
Good to see you jumping in Alex! Nice looking wood as well. I would go with that bear claw top since the back and side wood is not extremely flashy. But that is just what I would do. As for binding....that is always a tough choice for me. I like to have a bunch of different bindings on hand so I can look at the combinations before choosing, but that is not always an option. However, since you are using BRW for the bridge and head plate, maybe BRW bindings would be a good choice? They would also be an expensive choice.


My only problem with the bearclaw is that it isn't really stiff. The sitka is very stiff, and I have several WRC tops that are really stiff as well, so things are still up in the air. BRW bindings would be great, but getting them is the problem here in Canada. I definitely need something dark to contrast the back and sides.
My pictures don't show the birdseye like they really are. The fluorescent lighting in my shop is not very flattering. I looks much more stunning in person. I look forward to you looking over my shoulder on this...but no funny business! laughing6-hehe

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
PostPosted: Wed Jan 09, 2013 9:59 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Dec 17, 2010 6:22 pm
Posts: 1295
First name: Miguel
Last Name: Bernardo
Country: portugal
Focus: Build
Status: Semi-pro
so you´re into the challenge as well Alex? goo luck then! lovely wood, BTW.

_________________
member of the guild of professional dilettantes


Top
 Profile  
 
PostPosted: Wed Jan 09, 2013 5:55 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3290
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
I would like to apologize in advance for any and all of Tony's comments in your thread. He just aint right. I look forward to watching this unfold!

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
PostPosted: Wed Jan 09, 2013 6:30 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
Bryan Bear wrote:
I would like to apologize in advance for any and all of Tony's comments in your thread. He just aint right. I look forward to watching this unfold!

Well...I probably have it coming, but you're right. That boy just ain't right in da head! beehive He does dress real nice, though. His sartorial splendor would fit right in at an Octoberfest beer hall! Ein prosit, baby! The Fraulein are coming!

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
PostPosted: Thu Jan 10, 2013 7:11 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
Made this today. Looks a little like a potato cannon.
Attachment:
P1020280.JPG


You do not have the required permissions to view the files attached to this post.

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
PostPosted: Fri Jan 11, 2013 7:36 am 
Offline
Koa
Koa
User avatar

Joined: Tue Sep 30, 2008 8:57 am
Posts: 544
Location: Auchtermuchty, Fife, Scotland
Focus: Build
Status: Amateur
Cool Iron... (if that is not an oxymoron :shock: )


Top
 Profile  
 
PostPosted: Fri Jan 11, 2013 8:26 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
Alex Kleon wrote:
Neck - Roasted maple with accents
Alex


What does "roasting" do for the maple? And did you do it? Or buy it pre cooked? TIA


Top
 Profile  
 
PostPosted: Fri Jan 11, 2013 8:48 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
Clinchriver wrote:
What does "roasting" do for the maple? And did you do it? Or buy it pre cooked? TIA


http://sharpslumber.com/caramelizedmaple.html

It makes it look purty.

_________________
http://www.CostaGuitars.com
PMoMC


Top
 Profile  
 
PostPosted: Fri Jan 11, 2013 8:53 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
Alex Kleon wrote:
Bryan Bear wrote:
I would like to apologize in advance for any and all of Tony's comments in your thread. He just aint right. I look forward to watching this unfold!

Well...I probably have it coming, but you're right. That boy just ain't right in da head! beehive He does dress real nice, though. His sartorial splendor would fit right in at an Octoberfest beer hall! Ein prosit, baby! The Fraulein are coming!

Alex


If you had laderhosen, you would wear them too. It's all the rage in the trendiest fashion circles. Or my avatar pic. I forget which one. Anyway, I plan on carpet bombing your thread with as many non sequitors as possible. I might even throw in some sequitors just to keep you on your toes.

_________________
http://www.CostaGuitars.com
PMoMC


Top
 Profile  
 
PostPosted: Fri Jan 11, 2013 9:34 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
Tony_in_NYC wrote:
Alex Kleon wrote:
Bryan Bear wrote:
I would like to apologize in advance for any and all of Tony's comments in your thread. He just aint right. I look forward to watching this unfold!

Well...I probably have it coming, but you're right. That boy just ain't right in da head! beehive He does dress real nice, though. His sartorial splendor would fit right in at an Octoberfest beer hall! Ein prosit, baby! The Fraulein are coming!

Alex


If you had laderhosen, you would wear them too. It's all the rage in the trendiest fashion circles. Or my avatar pic. I forget which one. Anyway, I plan on carpet bombing your thread with as many non sequitors as possible. I might even throw in some sequitors just to keep you on your toes.

So I'm looking at a surfeit of sequitors. Bring it on, Bad Boy! :D Sorry about the amount of alliteration. :oops:

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
PostPosted: Fri Jan 11, 2013 9:43 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
Tony_in_NYC wrote:
Clinchriver wrote:
What does "roasting" do for the maple? And did you do it? Or buy it pre cooked? TIA


http://sharpslumber.com/caramelizedmaple.html

It makes it look purty.


This is the info from where I bought the wood from. http://www.exotic-woods.com/product.asp ... le-roasted This is a really great place to buy from, with a very helpful staff! Their' luthier wood has a pretty good drool factor rating.

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 61 posts ]  Go to page 1, 2, 3  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com