Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 12:09 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: Burnisher idea.
PostPosted: Tue Feb 26, 2013 8:11 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat May 12, 2007 6:11 am
Posts: 176
Location: Canada
Sent from my GT-P3113 using Tapatalk 2

_________________
Under Compensated Nut!


Top
 Profile  
 
 Post subject: Re: Burnisher idea.
PostPosted: Tue Feb 26, 2013 8:13 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat May 12, 2007 6:11 am
Posts: 176
Location: Canada
Here's a link to a burnisher idea from a friend of mine.

https://www.youtube.com/watch?v=-EnhuGN ... ata_player
Sent from my GT-P3113 using Tapatalk 2

_________________
Under Compensated Nut!


Top
 Profile  
 
 Post subject: Re: Burnisher idea.
PostPosted: Wed Feb 27, 2013 10:21 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Jun 29, 2011 11:06 pm
Posts: 44
First name: matt
Last Name: zimbelman
City: Durham
State: North Carolina
Zip/Postal Code: 27705
Focus: Build
Status: Amateur
Thanks for the tip. [:Y:]

_________________
http://www.unit5woodworks.com


Top
 Profile  
 
 Post subject: Re: Burnisher idea.
PostPosted: Thu Feb 28, 2013 9:26 am 
Offline
Walnut
Walnut

Joined: Sun Feb 17, 2013 1:24 pm
Posts: 1
First name: Mark
Last Name: King
City: Vacaville
State: CA
Zip/Postal Code: 95688
Country: USA
Focus: Build
Status: Amateur
That's a great idea. What did he call that, an iteration bearing?


Top
 Profile  
 
 Post subject: Re: Burnisher idea.
PostPosted: Fri Mar 01, 2013 1:21 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat May 12, 2007 6:11 am
Posts: 176
Location: Canada
Actually it's the inner part ( I think he called it 'race') of a snowmobile bearing. Any bearing should do, roller type that is. He smashed the outer part to break the bearing apart, but an angle grinder could quickly separate the two parts. Bet your friendly auto fixer has lots of used bearings.

Sent from my GT-P3113 using Tapatalk 2

_________________
Under Compensated Nut!


Top
 Profile  
 
 Post subject: Re: Burnisher idea.
PostPosted: Fri Mar 01, 2013 7:03 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Sep 08, 2012 9:45 am
Posts: 142
First name: David
Last Name: Eddy
City: Mandeville
State: La
Zip/Postal Code: 70448
Country: USA
Focus: Build
Status: Amateur
Great idea! Both sides at the same time, I like it!!
I might grind that shape in an old drills shaft.


Top
 Profile  
 
 Post subject: Re: Burnisher idea.
PostPosted: Sun Mar 31, 2013 2:03 am 
Offline
Koa
Koa

Joined: Sat Aug 04, 2007 10:37 am
Posts: 590
Location: United States
First name: Michael
Last Name: Shaw
City: Phila
State: PA
Zip/Postal Code: 19125
Country: United States
Looks like an accident waiting to happen. A better idea would be to clamp the bearing in the vise...Mike

_________________
Guitars, guitars and more guitars.


Top
 Profile  
 
 Post subject: Re: Burnisher idea.
PostPosted: Sun Mar 31, 2013 8:19 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Mar 24, 2006 12:42 pm
Posts: 2360
Location: Windsor Ontario Canada
First name: Fred
Last Name: Tellier
City: Windsor
State: Ontario
Zip/Postal Code: N8T2C6
Country: Canada
Focus: Build
Status: Amateur
+ 1 on the clamp in vice for safety. Any ball bearing would do but a large one would be easier to clamp in the vice.

Fred

_________________
Fred Tellier
http://www.fetellierguitars.com
Facebook page http://www.facebook.com/pages/FE-Tellier-Guitars/163451547003866


Top
 Profile  
 
 Post subject: Re: Burnisher idea.
PostPosted: Wed Jun 05, 2013 1:14 pm 
Offline
Koa
Koa

Joined: Sat Nov 08, 2008 3:57 pm
Posts: 775
Location: Powell River BC Canada
First name: Daniel
Last Name: Minard
City: Powell River
State: BC
Country: Canada
What Fred said... Ball bearing, not roller bearing. Cool idea!


Top
 Profile  
 
 Post subject: Re: Burnisher idea.
PostPosted: Wed Jun 05, 2013 8:39 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 08, 2005 4:19 am
Posts: 1534
Location: United States
First name: Nelson
Last Name: Palen
Looks like the cross section radius of the ball path would effect the shape of the burr by taking it a little past 90 degrees to the scrapers edge. Also, the diameter of the bearing might influence how hard the scraper must be pressed against the bearing. Just thinking about what's happening during the process--not trying to complicate it.
Great idea!


Top
 Profile  
 
 Post subject: Re: Burnisher idea.
PostPosted: Mon Jun 17, 2013 4:30 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat May 12, 2007 6:11 am
Posts: 176
Location: Canada
Yeah, I meant ball bearing, not roller bearing.

Sent from my GT-P3113 using Tapatalk 4 Beta

_________________
Under Compensated Nut!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com