Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 12:39 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 26 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Sun Mar 31, 2013 10:19 pm 
Offline
Mahogany
Mahogany

Joined: Tue Sep 21, 2010 2:13 pm
Posts: 51
First name: John
Last Name: Smith
Focus: Build
Status: Amateur
I am going to attempt a fret-less, semi hollow, electric guitar.

I would like to thank:
Christopher Verhoeven for posting a free e- book which is going to be the basis for this build. http://www.muxguitars.com/lutherie/freeebook.pdf
OLF for this challenge.
This is the first complete guitar I attempt to build, although I had already built a body and used a neck I had laying around.

Part 1; The body.
1.1 The design.
I drew it by hand on a piece of paper, followed Verhoevens suggestion and made two copies.

Image

placed a copy on top of an MDF to cut out the template tomorrow.
Image


regards!


Top
 Profile  
 
PostPosted: Sun Mar 31, 2013 11:11 pm 
Offline
Contributing Member
Contributing Member

Joined: Mon Jul 11, 2011 12:43 am
Posts: 1326
Location: chicagoland, illinois
City: chicagoland
State: illinois
Country: usa
Focus: Build
Status: Amateur
...can't wait to hear some chords....
:?


Top
 Profile  
 
PostPosted: Tue Apr 02, 2013 2:03 pm 
Offline
Mahogany
Mahogany

Joined: Tue Sep 21, 2010 2:13 pm
Posts: 51
First name: John
Last Name: Smith
Focus: Build
Status: Amateur
nyazzip wrote:
...can't wait to hear some chords....
:?

He he, well if one wants to be nerdy (when the frets are abandoned) it is possible to make chords on the Pythagorean tuning system (prior to the 16th century) http://en.wikipedia.org/wiki/Pythagorea ... ........... or on the quarter-comma meantone http://en.wikipedia.org/wiki/Quarter-comma_meantone .........
...............but truth be told I aint got a good enough ear to do that.
I just want to try something different where looong glissando's are possible without the need of a whammy bar. Chords will be very difficult.


Top
 Profile  
 
PostPosted: Tue Apr 02, 2013 2:34 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Frank Zappa had a fretless Ampeg guitar once.... I think he actually figured out some chords for the thing.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Tue Apr 02, 2013 2:40 pm 
Offline
Mahogany
Mahogany

Joined: Tue Sep 21, 2010 2:13 pm
Posts: 51
First name: John
Last Name: Smith
Focus: Build
Status: Amateur
I cut a template with MDF and made my first mistake; the drawing was crooked. I realized this when I cut the MDF, should’ve stopped and gone back to the drawing board. Oops.

Unfortunately I thought that I could “even out” the MDF template by scraping it, when I realized that I couldn’t it was already too late since the wood had been routed. I learned that it is important to check and recheck your design, use CAD or at least paper with squares and a good set of rulers!
Next time I will also check by folding the paper down the center line as can be seen here http://www.gretsch-talk.com/forum/techn ... chtop.html

I spliced two pieces of cedar, heavy stuff but this is the only wood I could get, it cost me about 300 pesos.
Image

Image

Placed the template with double stick tape and routed it out. Then took a Stanley wood plane and flattened out the top. The template on the background is for the top, the flattening was to make sure that I could glue the top well.

Image

Image

Image


Image


Top
 Profile  
 
PostPosted: Tue Apr 02, 2013 2:47 pm 
Offline
Mahogany
Mahogany

Joined: Tue Sep 21, 2010 2:13 pm
Posts: 51
First name: John
Last Name: Smith
Focus: Build
Status: Amateur
Chris Pile wrote:
Frank Zappa had a fretless Ampeg guitar once.... I think he actually figured out some chords for the thing.

I'm not as crazy as Frank used to be! But I have some damned weird friends, one of them does this mad free improvisation thing where they actually un-tune their guitars. If I finish this guitar I'll ask him to fool around with it.


Top
 Profile  
 
PostPosted: Tue Apr 02, 2013 2:57 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
Mad Raxz wrote:
Chris Pile wrote:
Frank Zappa had a fretless Ampeg guitar once.... I think he actually figured out some chords for the thing.

I'm not as crazy as Frank used to be! But I have some damned weird friends, one of them does this mad free improvisation thing where they actually un-tune their guitars. If I finish this guitar I'll ask him to fool around with it.
Frank was crazy?

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
PostPosted: Tue Apr 02, 2013 8:56 pm 
Offline
Mahogany
Mahogany

Joined: Tue Sep 21, 2010 2:13 pm
Posts: 51
First name: John
Last Name: Smith
Focus: Build
Status: Amateur
verhoevenc wrote:
Thanks for the shout out! Hope it helps. It's not how I do a lot of things these days since I have more tools, but I still think its a great reference especially for those just starting out!
Best of luck,
Chris

No, thank you for the guide, it helps a lot. I'll do my best dude.


Top
 Profile  
 
PostPosted: Fri Apr 05, 2013 10:39 am 
Offline
Walnut
Walnut
User avatar

Joined: Thu Jun 18, 2009 6:43 am
Posts: 14
First name: Lee
Last Name: Nunes
City: Fall River
State: MA
Zip/Postal Code: 02721
Country: USA
Focus: Build
Status: Amateur
Cool shape. It's a lot like one of my favorite guitars, the Gibson L6S. What are you doing for the bridge and pickups? By the way, I'm jealous. No fretwork!

_________________
https://www.facebook.com/lee.nunes.35


Top
 Profile  
 
PostPosted: Sat Apr 06, 2013 8:49 pm 
Offline
Mahogany
Mahogany

Joined: Tue Sep 21, 2010 2:13 pm
Posts: 51
First name: John
Last Name: Smith
Focus: Build
Status: Amateur
Lee Nunes wrote:
Cool shape. It's a lot like one of my favorite guitars, the Gibson L6S. What are you doing for the bridge and pickups? By the way, I'm jealous. No fretwork!

Thanx, bridge I'm figuring Tunomatic. Pickups I got some for free, Duncan Designed, the previous owner wanted EMG's on his guitar and he exchanged the old DD's for my installing his new EMG's.
Yeah the no fretwork doesn't really make this count as my first guitar, just 90%, but I really want a fret-less to make violinistic wails!


Top
 Profile  
 
PostPosted: Sat Apr 06, 2013 8:58 pm 
Offline
Mahogany
Mahogany

Joined: Tue Sep 21, 2010 2:13 pm
Posts: 51
First name: John
Last Name: Smith
Focus: Build
Status: Amateur
Checking with the template for the top, also placed some knobs, pup rings, and tunomatic to get an idea.
Image

Routed out some cavities, and goofed up with the router as you can see here.
Image

Still, since that tear out is going beneath the top it shouldn't be a problem.

Image


Top
 Profile  
 
PostPosted: Sun Apr 07, 2013 6:21 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
This will be interesting for sure.

Looks like your removing wood with a forstner type bit and then routing the cavities? Hopefully your not free handing the router.......take the time to make a template.


Top
 Profile  
 
PostPosted: Sun Apr 07, 2013 11:47 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
verhoevenc wrote:
You see the MDF templates in the pictures...?
Chris


Ok I see he blew through the template duh


Top
 Profile  
 
PostPosted: Sun Apr 07, 2013 1:02 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Dec 15, 2009 1:46 pm
Posts: 667
First name: Robert
Last Name: Renick
City: Mount Shasta
State: ca
Zip/Postal Code: 96067
Country: us
Focus: Build
Status: Amateur
I helped a friend years ago with a fretless conversion, he is still at it. We used a glass fingerboard, sort of the inverse of a glass slide. He does fine with chords, but it is different of course. Looks good. http://www.nedevett.com/

_________________
http://shastaguitar.com/
http://www.kalimbakit.com/
http://www.youtube.com/user/comfyfootgr ... ature=mhee
http://www.facebook.com/robert.renick.7


Top
 Profile  
 
PostPosted: Sun Apr 07, 2013 3:35 pm 
Offline
Mahogany
Mahogany

Joined: Tue Sep 21, 2010 2:13 pm
Posts: 51
First name: John
Last Name: Smith
Focus: Build
Status: Amateur
Yeh, I used a Template. Fortunately I left a wide range of error on the edge, as Chris suggests in his e-book.

Ned Evetts guitar looks really cool!

Today I glued up a pair of "palo escrito" for the top. I believe the English word is Cocobolo (Dalbergia Rutussa) but I aint sure.
Image


Top
 Profile  
 
PostPosted: Mon Apr 08, 2013 8:10 pm 
Offline
Mahogany
Mahogany

Joined: Tue Sep 21, 2010 2:13 pm
Posts: 51
First name: John
Last Name: Smith
Focus: Build
Status: Amateur
Routed it with the template and evened it out by scraping.
Image
Image
Flattened it out with the Stanley
Image
Glued it up, I need more clamps!
Image


Top
 Profile  
 
PostPosted: Mon Apr 08, 2013 11:09 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Oct 16, 2012 1:23 am
Posts: 262
First name: nick
Last Name: dingle
Focus: Build
Status: Amateur
Quote:
I need more clamps!


Don't we all.... :roll:


Top
 Profile  
 
PostPosted: Tue Apr 09, 2013 12:31 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Sep 11, 2006 3:56 am
Posts: 855
Location: United States
Hi Raxz,

Palo Escrito and Cocobolo are two different woods. Their scientific names are Dalbergia Palo Escrito and Dalbergia Retusa, respectively.

Max

_________________
Max Bishop
Brighton, Michigan


Top
 Profile  
 
PostPosted: Tue Apr 09, 2013 9:53 pm 
Offline
Mahogany
Mahogany

Joined: Tue Sep 21, 2010 2:13 pm
Posts: 51
First name: John
Last Name: Smith
Focus: Build
Status: Amateur
MaxBishop wrote:
Hi Raxz,

Palo Escrito and Cocobolo are two different woods. Their scientific names are Dalbergia Palo Escrito and Dalbergia Retusa, respectively.

Max


Thank you Max, the thing is that I get the wood from people who know a lot of trees and wood but only in their language. They haven't got a clue as to what their names are in English, or scientific names. I asked them for Cocobolo and they said "what?", I asked them for Dalbergia Retusa and they said "eh?". I saw the Palo Escrito and said that looks like it.

What is Dalbergia Palo Escrito called in the US?


Top
 Profile  
 
PostPosted: Sat Apr 13, 2013 8:41 pm 
Offline
Mahogany
Mahogany

Joined: Tue Sep 21, 2010 2:13 pm
Posts: 51
First name: John
Last Name: Smith
Focus: Build
Status: Amateur
Very little progress this week, but here are some pics of the body.


I placed some of the hardware on top to try and figure out which way of placing the volume knobs will look better.

Image

Image

Which would you do?

Cleaned up the wood a little with the trusty Stanley plane.

Image


Top
 Profile  
 
PostPosted: Sat Apr 13, 2013 9:48 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Dec 21, 2012 11:52 am
Posts: 1388
First name: Zeke
Last Name: McKee
City: Goodlettsville
State: TN
Zip/Postal Code: 37070
Country: United States
Focus: Build
Status: Amateur
I'm a fan of the two on top two on bottom configuration. Looks better and easier to use. At least for me anyway.


Top
 Profile  
 
PostPosted: Sat Apr 13, 2013 9:53 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Dec 21, 2012 11:52 am
Posts: 1388
First name: Zeke
Last Name: McKee
City: Goodlettsville
State: TN
Zip/Postal Code: 37070
Country: United States
Focus: Build
Status: Amateur
Also, how are you going to anchor the strings? I notice you don't have anything laid on there. Got me curious :)


Top
 Profile  
 
PostPosted: Sun Apr 14, 2013 2:37 am 
Offline
Cocobolo
Cocobolo

Joined: Tue Oct 16, 2012 1:23 am
Posts: 262
First name: nick
Last Name: dingle
Focus: Build
Status: Amateur
Reminds me of a Zemaitis.......


Top
 Profile  
 
PostPosted: Sun Apr 14, 2013 12:31 pm 
Offline
Mahogany
Mahogany

Joined: Tue Sep 21, 2010 2:13 pm
Posts: 51
First name: John
Last Name: Smith
Focus: Build
Status: Amateur
ZekeM wrote:
I'm a fan of the two on top two on bottom configuration. Looks better and easier to use. At least for me anyway.

Yeah, me too. I hope that the electronics will fit this way because I also want to make a sustainer, a la Sustainiac's C model.

ZekeM wrote:
Also, how are you going to anchor the strings? I notice you don't have he strings anything laid on there. Got me curious :)


My Original idea is to send strings thru the body, kinda like a Gibson Flying V, I might change that because there seems to be too big a space on the body. Maybe a tunomatic tail-piece would look better.


Top
 Profile  
 
PostPosted: Wed May 15, 2013 10:32 pm 
Offline
Mahogany
Mahogany

Joined: Tue Sep 21, 2010 2:13 pm
Posts: 51
First name: John
Last Name: Smith
Focus: Build
Status: Amateur
I had lost the cable to down-load pics from the camera to the computer. but I have been working on the neck. Lots of pics, more than 30, but I still have to get them in order so I'll go peice by peice. This is cutting out the scarf joint.
Image
Image
Image
Image
Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 26 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com