Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 4:28 am


All times are UTC - 5 hours


Forum rules


Same rules apply to all forums at the Luthiers Forum.




Post new topic Reply to topic  [ 27 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: The Last F5C
PostPosted: Sat Sep 26, 2015 3:33 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Finally got around to taking a few photos of the finished July 9 F5C. I missed the first one (kept for 7 years) so much that I decided to distress this one too.

Image

Closeup of the red spruce top...the crack on the rear point is fake, but was a common crack on the originals.

Image

Little bit of scuffing and tarnish on the James' tailpiece.

Image

Back of instrument with 2 pc red maple flat sawn back...heavy wear on neck facilitates playing.

Image

Close up of the back. Note the flat sawn grain.

Image

Stew Mac tuners are shiny nickel that have been tarnished with PC etchant. Siminoff MOP buttons hand fit to the tuners and some of the screws' slots "abused". Back of peg head point dinged, common occurrence.

Image

Front face of peg head. Note the shiny nickel tuners and compare to below.

Image

Treble side of peg head showing the "side bound" binding.

Image

Bass side of peg head and inlay. Again, note the variation in color of the binding.

Image

Bass side of neck, tortoise dots, MOP nut and more wear on binding.

Image

Front point. Loar points were made from bone instead of ivoroid, and note how they were "dovetailed" into the top and back binding.
They are a real SOB to fashion.

Image

Rear point.

Image

Last one, horizontal view.

Image

Thanks for looking folks.


Last edited by Haans on Mon Apr 23, 2018 9:11 am, edited 6 times in total.

Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Sat Sep 26, 2015 4:47 pm 
Offline
Koa
Koa

Joined: Mon Jul 11, 2005 5:17 am
Posts: 995
Location: United States
City: Tyler
State: Texas
Thanks for posting it. It is truly a work of art.



These users thanked the author Glen H for the post: Haans (Sun Sep 27, 2015 6:03 pm)
Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Sat Sep 26, 2015 4:55 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu May 12, 2005 5:46 am
Posts: 2931
Location: United States
Wowser, that's beautiful Haans!

_________________
Jim Watts
http://jameswattsguitars.com



These users thanked the author Jim Watts for the post: Haans (Sun Sep 27, 2015 6:03 pm)
Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Sun Sep 27, 2015 7:10 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12971
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Very. very cool mando Hans! She looks fantastic!!!!

_________________
Ann Arbor Guitars



These users thanked the author Hesh for the post: Haans (Sun Sep 27, 2015 6:03 pm)
Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Sun Sep 27, 2015 8:18 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat May 17, 2008 1:11 pm
Posts: 2335
Location: Spokane, Washington
First name: Pat
Last Name: Foster
Country: USA
Focus: Build
Status: Semi-pro
Haans,

If ever anyone went out with a bang, you've done it with this one.

Pat

_________________
formerly known around here as burbank
_________________

http://www.patfosterguitars.com



These users thanked the author Pat Foster for the post: Haans (Sun Sep 27, 2015 6:03 pm)
Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Sun Sep 27, 2015 8:27 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Dec 30, 2012 10:04 pm
Posts: 712
First name: Doug
Last Name: Balzer
City: Calgary
State: Alberta
Country: Canada
Focus: Build
Status: Semi-pro
You da man Haans!

_________________
Doug

Don't let fear or common sense stop you from trying to build something



These users thanked the author Doug Balzer for the post: Haans (Sun Sep 27, 2015 6:03 pm)
Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Sun Sep 27, 2015 4:04 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7240
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
That's beautiful Hans - looks like a 60 year old classic!

_________________
Steve Smith
"Music is what feelings sound like"



These users thanked the author SteveSmith for the post: Haans (Sun Sep 27, 2015 6:03 pm)
Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Sun Sep 27, 2015 4:24 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Sublimely exquisite!

_________________
"Act your age, not your shoe size" - Prince



These users thanked the author Chris Pile for the post: Haans (Sun Sep 27, 2015 6:02 pm)
Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Sun Sep 27, 2015 4:56 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Nov 24, 2008 12:17 pm
Posts: 1161
City: Escondido
State: CA
Zip/Postal Code: 92029
Country: USA
Focus: Build
Status: Semi-pro
As usual absolutely stunning. Tiny quibble, I wish you hadn't artificially aged it. It looks great, it's more of a philosophy than a complaint on this particular instrument. It's just that I feel things age quickly enough, I don't want to add an artificial layer of age.


Sent from my iPhone using Tapatalk



These users thanked the author rlrhett for the post (total 2): Shaw (Wed Dec 23, 2015 3:01 pm) • Haans (Sun Sep 27, 2015 6:02 pm)
Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Sun Sep 27, 2015 5:43 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Thanks everyone!
If ever there was an instrument to test your sanity, the F5 is it. This particular one had a CNC carved top and back, but the CNC guy backed out the inside 3mm extra on the top and back so I had a full 6mm on the top and 5mm on the back. That left enough for me to use my own graduations and saved an old man from having to dig into the oxycodone...
Here is a very close up of the top a couple inches from the tailpiece where you can see a little of the varnish checking carefully applied. Old Gibsons used to check around the recurve and other "shallow" areas where varnish tended to be a little heavier. This checking is artificially done. You can also see a little shirtsleeve wear next to the binding in the proper place...

Image

I tried to find an old case for it but Loar cases are through the roof. I ended up settling for the Saga as the interior is a good replication, the outside has crappy modern clasps, a label (which I ripped off), and a horrid looking handle. The Tolex was loose all the way around the bottom edge, but I kept it anyway as that should deteriorate fast as the case gets distressed.

Image

Yes, yes, I know most every one on this board wants the flawless, glass perfect finish and look at this as a tragedy. Many of you would have spread the epoxy over the maple to fill the pores. The point is that good mandolin players look for a thin finish and a few dings and dents don't bother them at all. It's all tone...some know this.
Here is a link to the July 9 Loar that has been my inspiration all these years.

http://www.mandolinarchive.com/gibson/serial/73992

Consider that those Loars with all their "flaws" are worth upwards of $150,000 each. Distressing done properly does not detract from the value of an instrument. You also have the freedom of knowing the instrument is your pal and you can hand it to anyone without worry. As you can probably tell, it wasn't dragged behind a car...
Also consider that once the Master Model was distressed and ran some thousands above the regular MM. My own #1 F5C-distressed sold for $15K cash after the guy flew out and stayed at our house for 3 days playing it...and that was 7 years ago. He still emails me every so often to say that everyone that plays it says "Never sell it."

For those that absolutely must have perfection I usually said talk to another builder, but I do offer this photo...it's about as close as I can do it on an F5.

Image


Last edited by Haans on Mon Apr 23, 2018 9:13 am, edited 3 times in total.

Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Sun Sep 27, 2015 6:31 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Hesh wrote:
Very. very cool mando Hans! She looks fantastic!!!!


BTW, Hesh, guys that own one (this was #12 of the F5C's) just call 'em "Lloyd". :)


Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Mon Sep 28, 2015 11:39 am 
Offline
Mahogany
Mahogany

Joined: Mon Dec 22, 2008 7:22 pm
Posts: 88
First name: doug
Last Name: powdrell
City: hilo
State: big island
Focus: Build
Status: Amateur
Haans; Beautiful.....you qualify as a 'master luthier' in my eyes.....



These users thanked the author powdrell for the post: Haans (Wed Sep 30, 2015 8:01 am)
Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Tue Sep 29, 2015 6:17 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Thanks, Doug, but I used prefer just to be a "builder"...as most folks here know, it's just a bunch of learned tricks, practiced over and over.


Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Tue Sep 29, 2015 8:47 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 9:42 pm
Posts: 4216
Location: Buffalo, NY
First name: Robert
Last Name: Cefalu
City: Buffalo
State: NY
Zip/Postal Code: 14217
Country: US
Awesome work Haans I feel bad that you can't continue. :(

_________________
Beautiful and unusual tone woods at a reasonable price.
http://www.rctonewoods.com/RCT_Store
The Zootman
1109 Military Rd.
Kenmore, NY 14217
(716) 874-1498



These users thanked the author Bobc for the post: Haans (Wed Sep 30, 2015 8:01 am)
Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Tue Sep 29, 2015 9:37 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Aug 26, 2005 5:49 pm
Posts: 2915
Location: Norway
Hans, I'm a big fan of your work, this one looks really terrific. I build the occasional F5 mandolin, so I know the amount of work and trouble that goes into a "regular" one, never mind going to the lengths you do to keep it close to Loar specs, and all the extra work with the distressing on this one. This is truly a masterpiece, I wish I could see it in person.

I think mandolin people are more like violin people with regards to appearance and finish of their instruments; the well worn look is expected, and usually seen a healthy sign of a good instrument that has been played for years, probably because it sounds good. It has to play well of course, and feel right to the player (the appearance is part of that I guess), but the main focus is always the tone.

_________________
Rian Gitar og Mandolin



These users thanked the author Arnt Rian for the post: Haans (Wed Sep 30, 2015 8:01 am)
Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Tue Sep 29, 2015 12:26 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Dec 18, 2008 11:42 am
Posts: 1135
Location: Hudson, MA
First name: Kevin
Last Name: Quine
City: Hudson
State: MA
Country: Usa
Focus: Build
Status: Amateur
That's a gorgeous mandolin. That's a pretty light version of distressing



These users thanked the author Quine for the post: Haans (Wed Sep 30, 2015 8:02 am)
Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Wed Sep 30, 2015 7:50 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Well, Bob, life is what you end up with, and then it's over. We all know the end will come, some choose to ignore it till it smacks them in the face. It is product of your early family life and everything that happens is influenced from there on. Frankly, I'd just as soon leave before it gets much worse in this sad world. Next Universe please...
Thanks Arnt! We both know what is expected of mandolins, and yes, they are more like violins, except for the Pac Rims...they are nice and shiny for beginners.
Quine, thanks. Yes, distressing is best when kept to a minimum. You really have to think about each little thing you do. Shiny nickel tuners look terrible ( and so do the Stew Mac "aged" tuners). Wear on the neck only makes it easier to play as your hand doesn't drag on the varnish. Many players sand the finish off their necks. You can put less finish on which just makes it sound better, and a few light scratches here and there (thoughtfully applied) are not offensive.


Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Wed Sep 30, 2015 6:35 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
I love the distressing!
Ken Mckay does a similar finish on his electrics, I love his look as well.
The crackled varnish is a really nice touch.
Thanks very much for sharing.
Dan

_________________
wah
Wah-wah-wah-wah
Wah



These users thanked the author dzsmith for the post: Ken McKay (Thu Dec 31, 2015 9:52 am)
Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Thu Oct 01, 2015 5:59 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Thanks, Dan!
Not really "crackled" as far as I know, crackling sticks up from the finish and crazing or checking sits below the level of the finish.



These users thanked the author Haans for the post: dzsmith (Thu Oct 01, 2015 2:31 pm)
Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Fri Dec 04, 2015 2:16 pm 
Offline
Koa
Koa

Joined: Fri Jan 25, 2008 9:55 am
Posts: 982
Location: Traverse City Michigan
fantastic!!!

_________________
Ken


Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Wed Dec 30, 2015 5:20 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Aug 26, 2011 2:21 am
Posts: 668
Location: Philadelphia
First name: Michael
Last Name: Shaw
City: Philadelphia
State: PA
Zip/Postal Code: 19125
Country: USA
Focus: Repair
Status: Semi-pro
I was never a fan of pre distressed instruments since I like to distress them myself naturally. But I'll admit that's one nice mandolin.

Sent from my HTC Desire 626s using Tapatalk

_________________
Another day, another dollar.


Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Wed Jan 20, 2016 1:15 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Sep 14, 2013 9:46 pm
Posts: 755
Location: Napa Valley
First name: David
Last Name: Foster
City: Napa
State: CA
Zip/Postal Code: 94558
Country: USA
Focus: Build
Status: Amateur
makes me want to build a Mandolin. Very nice. How did you go about achieving the checking in the lacquer? I've been want to try this.

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/


Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Wed May 17, 2017 7:00 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Oh, dear, I'm sorry David, I never saw this till just now... oops_sign
While I check in several times a week, I must have missed it.
Since it is a pretty good question, I'll answer it; just a "little" late. I hope you are still around and interested. Or anyone else!
First of all, this only works with a alcohol varnish or French polishing. Twenty-four hours after buffing, an application of egg whites over areas you want to distress. Spray a coat (think I thinned it out a bit and jacked up the pressure). Allow to completely dry
Wipe off the dried egg white with a lightly wet, soft cotton cloth and you are done! Don't overdo it, a little bit goes a long way in distressing.
You really don't have to thin it out much, and the heavier coat you apply, the wider and deeper the checking.
Hope that helps anyone wishing to try it...



These users thanked the author Haans for the post: Clinchriver (Sun May 21, 2017 5:47 am)
Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Fri May 19, 2017 8:46 am 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1905
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
Haans, you are a true artist!

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com



These users thanked the author sdsollod for the post: Haans (Mon May 22, 2017 7:29 am)
Top
 Profile  
 
 Post subject: Re: The Last F5C
PostPosted: Fri May 19, 2017 1:14 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jul 13, 2006 6:17 am
Posts: 1937
Location: Evanston, IL
First name: Steve
Last Name: Courtright
Focus: Build
Status: Amateur
The intersection of craft and art. Sublime finish work - love your perfect colors - and lots of tasty structural details. Thanks for sharing Haans!

_________________
"Building guitars looks hard, but it's actually much harder than it looks." Tom Buck



These users thanked the author SteveCourtright for the post: Haans (Mon May 22, 2017 7:30 am)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 27 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com