Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 12:51 pm


All times are UTC - 5 hours


Forum rules


Same rules apply to all forums at the Luthiers Forum.




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Internal spreader?
PostPosted: Sat Feb 06, 2016 3:56 pm 
Offline
Koa
Koa

Joined: Mon Dec 18, 2006 9:42 am
Posts: 1574
Location: United States
Working on my first ukulele. How do you spread the sides in the form when attaching the top and back, so that you can get the spreader out later?


Top
 Profile  
 
 Post subject: Re: Internal spreader?
PostPosted: Sat Feb 06, 2016 4:18 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12971
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
I have no clue and have never done this.

But it seems to me that with a uke you could use miniature, conventional guitar spreaders, install the linings of a thickness and stiffness to lock the rim in the proper shape, let dry, remove spreaders completely and then install the top or back depending on your preferred order.

Just guessing though.

I'm interested in an answer from someone who has done this though - great question.

_________________
Ann Arbor Guitars



These users thanked the author Hesh for the post: wbergman (Sat Feb 06, 2016 4:52 pm)
Top
 Profile  
 
 Post subject: Re: Internal spreader?
PostPosted: Sat Feb 06, 2016 4:55 pm 
Offline
Koa
Koa

Joined: Mon Dec 18, 2006 9:42 am
Posts: 1574
Location: United States
I already installed laminated linings that did not spring back until installed on properly spread sides, and not there is a little spring back. Maybe not enough to matter, but I prefer not to have it.

I am leaning towards using a stick wedged in with a little wedge and have a stout string tied around the stick. After all done, yank the string to pull it loose. But, I have never done this before.


Top
 Profile  
 
 Post subject: Re: Internal spreader?
PostPosted: Sun Feb 07, 2016 11:55 am 
Offline
Koa
Koa

Joined: Mon Feb 13, 2012 8:49 pm
Posts: 951
First name: peter
Last Name: havriluk
City: granby
State: ct
Zip/Postal Code: 06035
Country: usa
Focus: Build
Status: Amateur
I recently assembled a kit guitar whose instructions said to make up a solid square spreader stick and make a pair of offset cuts top and bottom more than halfway through, one on the top, the other on the bottom. When the spreader is no longer needed, reach inside the sound hole and flex the stick towards the open space inside and it will break between the cuts, and remove the two pieces. Worked just fine.

_________________
Peter Havriluk



These users thanked the author phavriluk for the post (total 2): pkdz (Thu Aug 04, 2016 12:32 pm) • wbergman (Sun Feb 07, 2016 12:59 pm)
Top
 Profile  
 
 Post subject: Re: Internal spreader?
PostPosted: Sun Feb 07, 2016 3:18 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12971
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
I'm going to be talking to Herb David the guy who introduced Dan Earlewine to Lutherie tomorrow. Herb is a good friend and kind of like family to Dave and I and I will ask him what he did. He built hundreds of ukes along with guitars and we still have all of his molds and forms in our shop.

More to come.

_________________
Ann Arbor Guitars



These users thanked the author Hesh for the post: wbergman (Sun Feb 07, 2016 3:19 pm)
Top
 Profile  
 
 Post subject: Re: Internal spreader?
PostPosted: Sun Feb 07, 2016 5:56 pm 
Offline
Koa
Koa

Joined: Sat Apr 19, 2008 10:08 pm
Posts: 1958
Location: Missouri
First name: Patrick
Last Name: Hanna
State: Missouri
Country: USA
My question is: Why would you need to attach top and back at the same time? Given the potential difficulty of removing spreaders, why not just use them with the sides in the external mold to attach the top. Then remove from the mold and attach the back without the use of internal spreaders?



These users thanked the author cphanna for the post: wbergman (Sun Feb 07, 2016 8:24 pm)
Top
 Profile  
 
 Post subject: Re: Internal spreader?
PostPosted: Sun Feb 07, 2016 8:24 pm 
Offline
Koa
Koa

Joined: Mon Dec 18, 2006 9:42 am
Posts: 1574
Location: United States
I was anticipating that if I attach the top with a spreader in the mold, then when I remove it, the sides would splay in a little towards the back before I attach the back. I think it is no different than a guitar--just smaller. But I might be worrying too much.


Top
 Profile  
 
 Post subject: Re: Internal spreader?
PostPosted: Mon Feb 08, 2016 12:24 am 
Offline
Cocobolo
Cocobolo

Joined: Mon Apr 14, 2008 3:20 am
Posts: 376
Location: Kapolei HI
First name: Aaron
Focus: Build
Status: Semi-pro
Without going into detail on the "why" (it'll be the same reason for guitars - keep the sides square), I use turnbuckles (marine supply) for the spreaders. They're inserted in grooves in the cauls, so they can be "pulled" out of the soundhole. Why turnbuckles? Its how I was taught. And it works, even in the lower bout.

FTR - I also run them heelblock to tailblock. It gets pretty crowded in there. . .



These users thanked the author Aaron O for the post: wbergman (Mon Feb 08, 2016 6:21 am)
Top
 Profile  
 
 Post subject: Re: Internal spreader?
PostPosted: Mon Feb 08, 2016 2:01 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2246
Location: Seattle WA
Focus: Build
Status: Semi-pro
Just scrap sticks stiff enough to hold with a little flex and light enough to break out work fine.

_________________
Pat



These users thanked the author Pmaj7 for the post: wbergman (Mon Feb 08, 2016 6:21 am)
Top
 Profile  
 
 Post subject: Re: Internal spreader?
PostPosted: Tue Feb 09, 2016 12:59 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Dec 18, 2008 11:42 am
Posts: 1135
Location: Hudson, MA
First name: Kevin
Last Name: Quine
City: Hudson
State: MA
Country: Usa
Focus: Build
Status: Amateur
I use a small turnbuckle and two wood blocks at the ends. The blocks are shaped to fit the side curve and have a hole drilled in so the turnbuckle won't slip out. Just be sure the blocks will fit through your sound hole and you can reach inside to loosen it



These users thanked the author Quine for the post: wbergman (Tue Feb 09, 2016 1:46 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com