Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 4:29 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Tue Nov 15, 2016 9:19 am 
Offline
Cocobolo
Cocobolo

Joined: Sun Aug 25, 2013 9:34 am
Posts: 356
Location: Massachusetts
First name: Rob
Last Name: Lak
State: Massachusetts
Country: USA
Focus: Build
Status: Amateur
My son and I are going to build him an OM and he's got some flamed padauk for the b/s... I had gotten some nice Sitka for the top but he's thinking he'd like to do a dark top and he's not a fan of tinted wood... so I thought there might be some decent sinker out there.

After looking at a few sites, he's partial to the more stripey sets (not figured). I'm a little concerned that the flamed b/s with the striped top might be a bit like wearing striped pants with a plaid shirt (not that there's anything wrong with that...) but I'm only going to try to tell a 16 year old what he really wants for so long...

I've only found a couple sites with Sinker tops, and only one with any that tickled his fancy. I'd like to get a better selection.

I am going to go through all the sponsors sites today, but if anyone has some source suggestions outside of those, it's appreciated.

Thnx!


Top
 Profile  
 
PostPosted: Fri Nov 25, 2016 9:55 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7219
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional
Think you'll have more luck on the main forum.


Top
 Profile  
 
PostPosted: Sat Nov 26, 2016 12:28 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Jul 01, 2011 2:14 pm
Posts: 268
Location: Creedmoor, NC
First name: Tim
Last Name: Benware
City: Creedmoor
State: NC
Zip/Postal Code: 27522
Country: USA
Focus: Build
Status: Professional
Here's a good source

http://www.luthierscooltools.com/Sinker_Gallery.htm

_________________
"I've been had again"
Tim Benware
Creedmoor, NC


Top
 Profile  
 
PostPosted: Fri Dec 02, 2016 8:39 am 
Offline
Cocobolo
Cocobolo

Joined: Sun Aug 25, 2013 9:34 am
Posts: 356
Location: Massachusetts
First name: Rob
Last Name: Lak
State: Massachusetts
Country: USA
Focus: Build
Status: Amateur
LOL... not sure how I ended up posting here.

Tim... I actually did end up there and bought on of those tops. Pricey, but it's likely the only guitar my son will ever build so it's worth the binding time... :-)



These users thanked the author Robert Lak for the post: Ben-Had (Mon Dec 05, 2016 1:43 am)
Top
 Profile  
 
PostPosted: Fri Dec 02, 2016 9:11 am 
Offline
Contributing Member
Contributing Member

Joined: Tue Nov 02, 2010 2:52 pm
Posts: 204
First name: Rahoul
Last Name: waghmare
City: pune
State: maharashtra
Zip/Postal Code: 411044
Country: india
Focus: Build
Status: Amateur
Dave myers. he is my good friend.
https://www.facebook.com/Dave.Myers.BC.Tonewood


Top
 Profile  
 
PostPosted: Fri Dec 02, 2016 10:48 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3290
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
Robert Lak wrote:
. . ., but it's likely the only guitar my son will ever build . . .



Ha! we'll see about that.

Everybody here who set out to make one instrument raise your hand.

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.



These users thanked the author Bryan Bear for the post: fingerstyle1978 (Sat Dec 03, 2016 11:41 am)
Top
 Profile  
 
PostPosted: Fri Dec 02, 2016 3:24 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7219
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional
Raised.


Top
 Profile  
 
PostPosted: Sat Dec 03, 2016 11:42 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Bryan Bear wrote:
Robert Lak wrote:
. . ., but it's likely the only guitar my son will ever build . . .



Ha! we'll see about that.

Everybody here who set out to make one instrument raise your hand.


I set out to make 4-5 but point taken. Past that now laughing6-hehe


Top
 Profile  
 
PostPosted: Sat Dec 03, 2016 11:50 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Robert Lak wrote:
My son and I are going to build him an OM and he's got some flamed padauk for the b/s... I had gotten some nice Sitka for the top but he's thinking he'd like to do a dark top and he's not a fan of tinted wood... so I thought there might be some decent sinker out there.

After looking at a few sites, he's partial to the more stripey sets (not figured). I'm a little concerned that the flamed b/s with the striped top might be a bit like wearing striped pants with a plaid shirt (not that there's anything wrong with that...) but I'm only going to try to tell a 16 year old what he really wants for so long...

I've only found a couple sites with Sinker tops, and only one with any that tickled his fancy. I'd like to get a better selection.

I am going to go through all the sponsors sites today, but if anyone has some source suggestions outside of those, it's appreciated.

Thnx!


Looks like some good sources were posted. I'm working on a very stripey top right now. More stripes = more mineral deposit = more brittle. This is my second sinker redwood top and this one is much more brittle than the previous. Definitely score your binding/purfling channels with a gramil. I learned that the hard way gaah. Luckily I started with a pretty conservative purfling scheme and was able to make it bigger to cover the chip out area and I like the design better now anyway. Just thought I'd share. Good Luck and happy building!!!


Top
 Profile  
 
PostPosted: Sat Dec 03, 2016 12:26 pm 
Offline
Cocobolo
Cocobolo

Joined: Sun Aug 25, 2013 9:34 am
Posts: 356
Location: Massachusetts
First name: Rob
Last Name: Lak
State: Massachusetts
Country: USA
Focus: Build
Status: Amateur
Thanks for the heads-up.


Top
 Profile  
 
PostPosted: Sat Dec 03, 2016 12:33 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2246
Location: Seattle WA
Focus: Build
Status: Semi-pro
I started out just planning to make one soundboard!

_________________
Pat


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com