Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Mar 29, 2024 6:35 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Sun Mar 05, 2017 9:17 am 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 14, 2009 3:14 am
Posts: 982
Location: Shefford, Québec
First name: Tim
Last Name: Mullin
City: Shefford
State: QC
Zip/Postal Code: J2M 1R5
Country: Canada
Focus: Build
Status: Professional
I have a client who has written to me about refinishing the top of a LaPatrie classical guitar (made by Godin, Quebec). All I know about the original finish is what they put in their advertising:
"LaPatrie guitars also feature a Custom Polished finish, which is reminiscent of the French polish of the 19th Century. This Custom Polished Finish, as opposed to "thick" polyester finishes, allows the top not only to be protected but also to breathe and vibrate freely" Elsewhere, they use the term "lacquer".

So, apparently not shellac and not a polyester. I'm suspecting not nitro, given the long cure requirement, so perhaps a water-based varnish?

Any of the repair or finish gurus here know what this might be and what might be an appropriate refinish option or approach. If I find a spot of acetone under a tuner plate burns in, do I dare use nitro (my regular finish)?

If i can do a good job at a reasonable price, I'd take the job on, but not if I'm likely to open a can of worms. I doubt the guitar is worth more than $1500, but I don't yet know the exact model.


Sent from my iPad using Tapatalk


Top
 Profile  
 
PostPosted: Mon Mar 06, 2017 8:28 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
Sounds like a post cat poly to me. I apply quite a bit of Conversion Varnish on classicals and flamencos and it fits the description. I would not base what the top is finished in by what is on the body.....it is not unusual to find a thicker more traditional finish on the neck and body and something different on the top.Being a factory made good I doubt it was a water based finish from the factory

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/


Top
 Profile  
 
PostPosted: Mon Mar 06, 2017 11:28 am 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 14, 2009 3:14 am
Posts: 982
Location: Shefford, Québec
First name: Tim
Last Name: Mullin
City: Shefford
State: QC
Zip/Postal Code: J2M 1R5
Country: Canada
Focus: Build
Status: Professional
B. Howard wrote:
Sounds like a post cat poly to me. I apply quite a bit of Conversion Varnish on classicals and flamencos and it fits the description. I would not base what the top is finished in by what is on the body.....it is not unusual to find a thicker more traditional finish on the neck and body and something different on the top.Being a factory made good I doubt it was a water based finish from the factory

Very helpful, Brian -- your info on finishing is ALWAYS helpful.
So, if it were Conversion Varnish or otherwise a mystery finish, would there be a safe way to apply a nitro finish (since that's what I'm set up for)? Surface prep? Sealer type?

Or should I just turn the job down? Doesn't really bother me to say "no", but also doesn't help the client.


Sent from my iPad using Tapatalk


Top
 Profile  
 
PostPosted: Tue Mar 07, 2017 8:01 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
Lacquer should stick just fine. I would only run a sealer if there is bare wood otherwise scuff the existing at 320 and shoot a regular course of nitro and buff as usual.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/



These users thanked the author B. Howard for the post: Tim Mullin (Wed Mar 08, 2017 7:01 pm)
Top
 Profile  
 
PostPosted: Tue Mar 07, 2017 10:20 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Tue Mar 14, 2006 12:41 pm
Posts: 316
Location: Trois-Rivieres
First name: Alain
Last Name: Lambert
City: Trois-Rivieres
State: Quebec
Country: Canada
Focus: Build
Status: Amateur
French polish would do no harm, will stick to almost anything and is a traditionnal finish for classical.



These users thanked the author Alain Lambert for the post: Tim Mullin (Wed Mar 08, 2017 7:01 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Bing [Bot] and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com