Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 3:35 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 12 posts ] 
Author Message
PostPosted: Fri Sep 01, 2017 5:50 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Finished my V build.
Maple, Padauk, and Ebony.
I went with the Schaller 3D bridge which allows varying the string spread.
The neck width at the bridge is wider than normal. Fits my fingers well.
Both fins are hollow, total weight is 6 pounds.
Grover tuners, Emg 81 pickup.
25.3" scale, 14" radius.
I made a mistake putting the jack on the inside of the lower fin: I'll need to get a right angle jack to play it sitting down.
Finish is wiped-on poly, no grain fill.
Dan


You do not have the required permissions to view the files attached to this post.

_________________
wah
Wah-wah-wah-wah
Wah


Top
 Profile  
 
PostPosted: Fri Sep 01, 2017 6:09 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Fri Apr 05, 2013 7:45 pm
Posts: 50
Beautifully done.

Sent from my SM-G955F using Tapatalk



These users thanked the author GourmetSaint for the post: dzsmith (Fri Sep 01, 2017 6:44 pm)
Top
 Profile  
 
PostPosted: Fri Sep 01, 2017 11:26 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Looks very nice. Good choice on the bridge, too.

_________________
"Act your age, not your shoe size" - Prince



These users thanked the author Chris Pile for the post: dzsmith (Sat Sep 02, 2017 9:24 am)
Top
 Profile  
 
PostPosted: Sat Sep 02, 2017 12:07 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12971
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Very nice!!

_________________
Ann Arbor Guitars



These users thanked the author Hesh for the post: dzsmith (Sat Sep 02, 2017 9:24 am)
Top
 Profile  
 
PostPosted: Sat Sep 02, 2017 10:53 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu May 12, 2005 5:46 am
Posts: 2931
Location: United States
That looks fun.
Nice job!

_________________
Jim Watts
http://jameswattsguitars.com



These users thanked the author Jim Watts for the post: dzsmith (Sat Sep 02, 2017 5:00 pm)
Top
 Profile  
 
PostPosted: Sun Sep 03, 2017 7:10 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
Very balanced, nicely composed.



These users thanked the author Clinchriver for the post: dzsmith (Sun Sep 03, 2017 10:57 am)
Top
 Profile  
 
PostPosted: Sun Sep 03, 2017 8:48 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
Nice one, Dan! The finish looks really nice without the grain fill!

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker



These users thanked the author Alex Kleon for the post: dzsmith (Sun Sep 03, 2017 10:57 am)
Top
 Profile  
 
PostPosted: Mon Sep 04, 2017 7:23 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Oct 18, 2005 12:50 pm
Posts: 729
Location: United States
First name: John
Last Name: Lewis
City: Newnan
State: Georgia
Zip/Postal Code: 30265
Country: USA
Focus: Build
Status: Amateur
Sweet!!!

_________________
John Lewis
Wannabe builder owned by 2 crazy dachshunds



These users thanked the author John Lewis for the post: dzsmith (Mon Sep 04, 2017 9:30 pm)
Top
 Profile  
 
PostPosted: Mon Sep 04, 2017 7:54 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Sep 25, 2012 6:56 pm
Posts: 484
First name: Aaron
Last Name: Hix
City: Chatsworth
State: Georgia
Zip/Postal Code: 30705
Country: USA
Focus: Build
Status: Professional
Awesome work, Dan!! Looks great!

_________________
Guitar Maker and Purveyor of the World's Finest Tonewoods
http://www.aaronhixguitars.com/
http://stores.ebay.com/A-Hix-Tonewood-a ... r-Supplies



These users thanked the author A.Hix for the post: dzsmith (Mon Sep 04, 2017 9:30 pm)
Top
 Profile  
 
PostPosted: Mon Sep 04, 2017 8:55 pm 
Offline
Cocobolo
Cocobolo

Joined: Sun Jun 21, 2009 6:14 pm
Posts: 439
First name: Mike
Last Name: Imbler
City: Wichita
State: KS
Zip/Postal Code: 67204
Country: usa
Focus: Build
I don't know electrics, but that is -very- elegant!
Mike



These users thanked the author Imbler for the post: dzsmith (Mon Sep 04, 2017 9:30 pm)
Top
 Profile  
 
PostPosted: Tue Sep 05, 2017 5:41 pm 
Offline
Koa
Koa

Joined: Tue Jan 22, 2008 8:57 pm
Posts: 735
Location: Austin, Texas
it would appear as if you made the wings hollow by basically making the sides of the axe similar to ribs on an acoustic, then added in a cap and back, and viola'!

those guitars, along with the Kelly, are notorious for neck diving...e.g. by reducing the weight of the body you're most likely going to have that issue in spades...

I noticed that tendency on my '84 RR custom...eventually I figured out that if I wrapped the strap around the face of the guitar on the wing it solved the problem.

'nice' solution to the issue of having to put 2 angles on the neck blank...e.g. you left the body in the same plane as the neck and recessed the bridge to make it workable...the biggest hurdle I see to making a neck through with a TOM or floating FLoyd Rose is just how the he!! do you deal with the fretboard extension...the only real solution (I don't consider slipping a wedge underneath to be 'real') I can think of is to use an overhead router with a very short pattern bit to not only level the top but also pattern around the fretboard leaving wood underneath the extension (or something very similar to that concept if you deal with 'elevations' on the blank before you glue the wings on...

either way, nice looking axe



These users thanked the author Mike_P for the post: dzsmith (Wed Sep 06, 2017 5:00 pm)
Top
 Profile  
 
PostPosted: Tue Sep 05, 2017 7:54 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Jul 01, 2011 9:17 am
Posts: 381
First name: Michael
State: AR
Country: USA
Focus: Build
Status: Amateur
Looks great and tempting to play.



These users thanked the author Sandywood for the post: dzsmith (Wed Sep 06, 2017 5:00 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com