Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 9:21 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 25 posts ] 
Author Message
PostPosted: Wed Nov 14, 2018 11:03 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
I'm catching up posting documentation of one of the two 00's I had been working on. Both are built on Ken's KMG 00 12 fret template in the Mega-Mold. This combo has worked great for me. This one has been long in process, and I'm back to finishing it up. I'll quickly post some of the highlights of the process.

Flame figure Maple Back & Sides
Sitka Spruce top
Sitka Spruce bracing
Ebony binding with b/w/b purfling
Ebony head plate and fingerboard with brass inlay
Slot head
Pyramid bridge
1 3/4 nut

First, make sure the humidity is right on
Image


Top
 Profile  
 
PostPosted: Wed Nov 14, 2018 11:06 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Some really nicely figured Maple for the back and sides.

Image

Image

This one will have an all Maple/Ebony theme - black and white. So a solid ebony center strip for the back.

Image

Image

Cutting brace stock
Image

Before I got my new go-bar deck built, I used Ken's simple stacked note card caul idea for gluing back braces.

Image

Shaping back braces
Image


Last edited by dpetrzelka on Wed Nov 14, 2018 11:10 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Wed Nov 14, 2018 11:09 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Back in process with the Ziricote 00-12 I finished some time back.

Image

Image


Top
 Profile  
 
PostPosted: Wed Nov 14, 2018 11:12 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Scraping the side wood to final thickness

Image

Bending sides in my home-made jig. The digitally controlled silicone heating blanket makes for great control.

Image

Image

Image


Top
 Profile  
 
PostPosted: Wed Nov 14, 2018 11:15 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Brass inlay

Image

Modern take on the classic torch

Image


Last edited by dpetrzelka on Wed Nov 14, 2018 11:18 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Wed Nov 14, 2018 11:16 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Boxes coming along - I built most of this in parallel with the Ziricote 00-12

Image

Take a break to make some new violin clamps
Image

Image

Image


Last edited by dpetrzelka on Wed Nov 14, 2018 11:36 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Wed Nov 14, 2018 11:20 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Simply remove everything thats not a guitar...

Image



These users thanked the author dpetrzelka for the post: Pmaj7 (Tue Dec 11, 2018 10:17 pm)
Top
 Profile  
 
PostPosted: Wed Nov 14, 2018 11:37 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Close the box

Image

Counter-bore the neck bolts

Image


Top
 Profile  
 
PostPosted: Wed Nov 14, 2018 11:38 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Bend some bindings, and then cook them until done...

Image

Image


Top
 Profile  
 
PostPosted: Wed Nov 14, 2018 11:40 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Rout the neck tenon

Image

And start binding

Image

Image

Image


Top
 Profile  
 
PostPosted: Wed Nov 14, 2018 11:41 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Apply some sealer coats to get a sense of the grain...

Image

Image


Top
 Profile  
 
PostPosted: Wed Nov 14, 2018 5:57 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1905
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
Lookin' good! Keep the photos comin'... [:Y:]

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
PostPosted: Tue Dec 11, 2018 2:06 pm 
Offline
Mahogany
Mahogany

Joined: Mon Sep 18, 2017 9:06 pm
Posts: 62
Focus: Build
Status: Amateur
Absolutely beautiful! Just the type of instrument I wish to build.

You have also taken a great interpretation of the Torch and fretboard markers!



These users thanked the author FlyingFred for the post: dpetrzelka (Tue Dec 11, 2018 2:44 pm)
Top
 Profile  
 
PostPosted: Tue Dec 11, 2018 5:07 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Thanks Fred.

Slowly making progress on the French Polish...

Image



These users thanked the author dpetrzelka for the post: Bryan Bear (Tue Dec 11, 2018 5:20 pm)
Top
 Profile  
 
PostPosted: Tue Dec 11, 2018 10:20 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2246
Location: Seattle WA
Focus: Build
Status: Semi-pro
Looking good Daniel! (Your shop looks like a clean room lol)

New username, same ole Pat Mac

_________________
Pat



These users thanked the author Pmaj7 for the post: dpetrzelka (Wed Dec 12, 2018 9:43 am)
Top
 Profile  
 
PostPosted: Wed Dec 12, 2018 10:00 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Thanks Pat.

I'm fortunate to have a clean office for the delicate work and setups. Tonewood is stored around the corner in a climate controlled room, and all the big power tools and dust creation happens out in the wood shop...

Pmaj7 wrote:
Looking good Daniel! (Your shop looks like a clean room lol)

New username, same ole Pat Mac



These users thanked the author dpetrzelka for the post: Pmaj7 (Thu Dec 13, 2018 3:44 am)
Top
 Profile  
 
PostPosted: Thu Dec 27, 2018 9:00 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6232
Location: Virginia
Beautiful! Great photo's too.

This is the first time since I've been on the OLF that I even looked in this sub-forum. I'll have to come back for more :D


Top
 Profile  
 
PostPosted: Thu Dec 27, 2018 9:37 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1701
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
gorgeous guitar! and as always really good pictures. I enjoyed going through the posts.

_________________
http://www.Harvestmoonguitars.com


Top
 Profile  
 
PostPosted: Thu Dec 27, 2018 10:39 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Feb 17, 2013 4:58 pm
Posts: 1449
First name: Ed
Last Name: Minch
City: Chestertown
State: MD
Zip/Postal Code: 21620
Country: United States
Focus: Build
Status: Amateur
Well done.Is there any stain on that maple or is it just shellac? What is your source for the maple?

Thanks for posting

Ed


Top
 Profile  
 
PostPosted: Sun Dec 30, 2018 11:14 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Thank you Ed, I didn't do any stain on this one, just shellac in a few different colors. Some of my blonde shellac gets a few drops of Vintage Amber, and I mix that in as I go. Still experimenting with shellac colors.

Its closest to Stew Mac's AAAA Flamed Maple, I'm sure many other suppliers can get this maple, but I think I got this in a large purchase a few years back. I can check if I have more.


Top
 Profile  
 
PostPosted: Sun Dec 30, 2018 11:16 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Just need to finish the saddle, and send her off.

Image

Image


Top
 Profile  
 
PostPosted: Tue Jan 08, 2019 11:20 pm 
Offline
Mahogany
Mahogany

Joined: Mon Sep 18, 2017 9:06 pm
Posts: 62
Focus: Build
Status: Amateur
Just beautiful! Are the instruments true replicas of the Martin OO guitars for measurements and bracing?



These users thanked the author FlyingFred for the post: dpetrzelka (Tue Jan 08, 2019 11:40 pm)
Top
 Profile  
 
PostPosted: Tue Jan 08, 2019 11:45 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
FlyingFred - thank you.

Very close to old Martin 00 12-fret—same scale, body outline, etc. But just as many differences.I try to brace as lightly as I can get away with, each has been a little more lightly braced than the last, all 1/4". The bodies on this last Figured Maple 00 and the Ziricote 00-12 before that were slightly deeper than a historic Martin - trying to add just a little more body/low end. And then I do a bolt-on M&T. For my next builds I plan to move on to the Gore style bolt-on...

Dovetails are romantic, but not nearly as friendly for long-term maintenance.


Top
 Profile  
 
PostPosted: Wed Jan 09, 2019 9:21 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1701
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
Nice looking guitar and quite a set of pictures. The 00-12 fret is my favorite guitar, and yours is a beauty.

_________________
http://www.Harvestmoonguitars.com



These users thanked the author johnparchem for the post: dpetrzelka (Wed Jan 09, 2019 10:21 am)
Top
 Profile  
 
PostPosted: Wed Jan 09, 2019 11:40 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7240
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Yes, that one came out very nice.

_________________
Steve Smith
"Music is what feelings sound like"



These users thanked the author SteveSmith for the post: dpetrzelka (Wed Jan 09, 2019 11:44 am)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 25 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com