Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 12:34 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Sun Feb 03, 2019 9:15 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Mar 17, 2017 8:42 pm
Posts: 388
First name: Pierre
Last Name: Castonguay
City: Québec, Qc
Country: Canada
Focus: Repair
Status: Semi-pro
Hello all,

I've been watching an old video from Dan Erlewine (from the "fretting series") last night in which Dan uses some wax on his files. I've heard of this before, but not been doing it. Now I’m going to try this, but I've looked at StewMac, Lee Valley, and googled quite a bit and can't find any clear reference to a particular product.

Do any of you do this too? What do you use? Where do you buy this stuff?

Thanks for your help.


Pierre
www.torvisse.com


Top
 Profile  
 
PostPosted: Sun Feb 03, 2019 9:28 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
I use chalk on my files sometimes to keep them from clogging. For wax I would think just beeswax.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/


Top
 Profile  
 
PostPosted: Sun Feb 03, 2019 10:20 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Mar 17, 2017 8:42 pm
Posts: 388
First name: Pierre
Last Name: Castonguay
City: Québec, Qc
Country: Canada
Focus: Repair
Status: Semi-pro
B. Howard wrote:
I use chalk on my files sometimes to keep them from clogging. For wax I would think just beeswax.


Thanks for the tips.

After some more searching, I believe Dan's using cutting lubricant in wax form, such as Pro-Cut or some other jeweller's stuff.

Would you try the kind that's used on saw blades?


Pierre
www.torvisse.com


Top
 Profile  
 
PostPosted: Sun Feb 03, 2019 12:31 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Feb 18, 2005 6:18 am
Posts: 265
Location: United States
First name: Frank
Last Name: Ford
City: Palo Alto
State: CA
Zip/Postal Code: 94301
Country: USA
Focus: Repair
Status: Professional
For me:

No wax on files - I clean the teeth by pushing the chips out sideways with hardwood block as needed.

An old candle (paraffin) for saw blades because it doesn't stick and adhere wood chips.

Beeswax for screws because it DOES stick to the screw. . .

_________________
Cheers,

Frank Ford

FRETS.COM
HomeShopTech
FRETS.NET



These users thanked the author Frank Ford for the post (total 2): Kbore (Mon Feb 04, 2019 8:45 am) • Smylight (Sun Feb 03, 2019 1:09 pm)
Top
 Profile  
 
PostPosted: Sun Feb 03, 2019 12:56 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7241
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
I was taught to use chalk on my files to help keep the teeth from clogging. Wax might have it's uses for files but I've not tried it. like Frank said, wax for saw blades and beeswax for wood screws.

_________________
Steve Smith
"Music is what feelings sound like"



These users thanked the author SteveSmith for the post: Smylight (Sun Feb 03, 2019 1:09 pm)
Top
 Profile  
 
PostPosted: Sun Feb 03, 2019 1:15 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Mar 17, 2017 8:42 pm
Posts: 388
First name: Pierre
Last Name: Castonguay
City: Québec, Qc
Country: Canada
Focus: Repair
Status: Semi-pro
Frank Ford wrote:
For me:

No wax on files - I clean the teeth by pushing the chips out sideways with hardwood block as needed.

An old candle (paraffin) for saw blades because it doesn't stick and adhere wood chips.

Beeswax for screws because it DOES stick to the screw. . .


Thanks Frank. I was asking about files used on frets rather than on wood. Does your tip with the hardwood block apply to that use? You're not using a file card (brass brush) to clean those?


Pierre
www.torvisse.com


Top
 Profile  
 
PostPosted: Sun Feb 03, 2019 1:15 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Mar 17, 2017 8:42 pm
Posts: 388
First name: Pierre
Last Name: Castonguay
City: Québec, Qc
Country: Canada
Focus: Repair
Status: Semi-pro
SteveSmith wrote:
I was taught to use chalk on my files to help keep the teeth from clogging. Wax might have it's uses for files but I've not tried it. like Frank said, wax for saw blades and beeswax for wood screws.


Definitely got to try chalk on mine...


Pierre
www.torvisse.com


Top
 Profile  
 
PostPosted: Sun Feb 03, 2019 4:57 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Feb 18, 2005 6:18 am
Posts: 265
Location: United States
First name: Frank
Last Name: Ford
City: Palo Alto
State: CA
Zip/Postal Code: 94301
Country: USA
Focus: Repair
Status: Professional
No, a file card is nearly useless and slightly destructive in my opinion.

I don't much use files on wood - I was referring to cleaning files used on metal as well.

You can clean single-cut files very efficiently using a block of hardwood - the action makes little grooves in the wood that match the file teeth and can push out most chips:

Image

A folded-over piece of copper plumbing pipe or tubing works really well, too, used in the same way.


If you want your files to cut really well, follow this link to Boggs Tool, where they can be sharpened for a very low price:

https://boggstool.com

A well-kept secret business since 1932, they use a special high pressure steam/abrasive to blast the teeth and bring an old file to better-than-new sharpness. All you have to do is send a box of files with your name and contact info and a count of the number of files in the box. A while later, like magic, the brown truck appears at your shop with a box of renewed files and a bill for the service. Any that can't be sharpened effectively are not charged, and the cost of doing the "good" ones is shockingly low. Literally any size, shape or type of file goes through the process well, including nut, fret, and any other specialty files. even the reject free ones come back far in far better shape than they left!

_________________
Cheers,

Frank Ford

FRETS.COM
HomeShopTech
FRETS.NET



These users thanked the author Frank Ford for the post (total 3): Goodin (Thu Feb 14, 2019 9:23 pm) • jrdnvctrmyr (Tue Feb 05, 2019 5:45 am) • Smylight (Sun Feb 03, 2019 4:59 pm)
Top
 Profile  
 
PostPosted: Sun Feb 03, 2019 5:00 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Mar 17, 2017 8:42 pm
Posts: 388
First name: Pierre
Last Name: Castonguay
City: Québec, Qc
Country: Canada
Focus: Repair
Status: Semi-pro
Huge tip! Thanks a lot Frank!


Pierre
www.torvisse.com


Top
 Profile  
 
PostPosted: Mon Feb 04, 2019 6:15 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Feb 17, 2013 4:58 pm
Posts: 1449
First name: Ed
Last Name: Minch
City: Chestertown
State: MD
Zip/Postal Code: 21620
Country: United States
Focus: Build
Status: Amateur
For the DYI crowd some Muriatic Acid - used to clean masonry - will sharpen files very nicely. About as good as the Boggs batch I sent out. Cover the file with the acid and check it after an hour. I have never cleaned them afterwards with anything but water, but many say you need something like borax to stop the acid.

I sent a dozen files to Boggs in a flat rate Priority envelope that was taped up all around - must have been 6-8 pounds worth.

Ed



These users thanked the author Ruby50 for the post: Smylight (Mon Feb 04, 2019 7:51 pm)
Top
 Profile  
 
PostPosted: Mon Feb 04, 2019 7:52 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Mar 17, 2017 8:42 pm
Posts: 388
First name: Pierre
Last Name: Castonguay
City: Québec, Qc
Country: Canada
Focus: Repair
Status: Semi-pro
Ruby50 wrote:
For the DYI crowd some Muriatic Acid - used to clean masonry - will sharpen files very nicely. About as good as the Boggs batch I sent out. Cover the file with the acid and check it after an hour. I have never cleaned them afterwards with anything but water, but many say you need something like borax to stop the acid.

I sent a dozen files to Boggs in a flat rate Priority envelope that was taped up all around - must have been 6-8 pounds worth.

Ed


Thanks Ed.


Pierre
www.torvisse.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com