Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 11:32 am


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 21 posts ] 
Author Message
PostPosted: Thu Jul 11, 2019 10:05 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1701
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
This flamenco is a long time coming as this spanish cyprus set was my third guitar set I bought many years back. For this guitar I have suspended most of my knowledge on how to build a guitar and have been following Paco Chorobo online class on Robbie O'Brien's site. The course is nicely detailed and while viewing, I picked up some woodworking techniques I did not have. Sometimes watching how people are using tools is just as valuable as what is being taught in the class.

This is a very traditional guitar for me in every way, no carbon fiber! I will French polish it next week.


Image

Image

Image

Image

Image

Image

Image

_________________
http://www.Harvestmoonguitars.com


Last edited by johnparchem on Sun Dec 01, 2019 12:01 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Fri Jul 12, 2019 3:32 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5398
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Looks well made, enjoy the finishing process.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Fri Jul 12, 2019 11:36 am 
Offline
Cocobolo
Cocobolo

Joined: Sun Oct 09, 2016 12:18 pm
Posts: 383
Location: Somerset UK
State: West Somerset
Country: UK
Focus: Build
Status: Amateur
Nice one John. Not looking for a live back by the look of it. Pegheds?

Dave



These users thanked the author Dave m2 for the post: dbbrantley (Tue Jul 30, 2019 9:57 pm)
Top
 Profile  
 
PostPosted: Fri Jul 12, 2019 12:23 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1701
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
Thanks Dave, the spanish cypress is light and the back is thin. I needed to brace it to get the back high enough. I get a very strong back response when doing a doing a spectrum tap test. Yes pegs, but I will use fancy geared ones.

_________________
http://www.Harvestmoonguitars.com


Top
 Profile  
 
PostPosted: Mon Jul 15, 2019 6:32 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Feb 09, 2006 2:35 pm
Posts: 2951
Location: United States
First name: Joe
Last Name: Beaver
City: Lake Forest
State: California
Focus: Build
Looks great John.

Been thinking about making one for a nephew, but I know very little about Flamenco guitars. Other than punchy notes with little sustain and low action so the player can produce the string buzz when they strum a certain way (I'm sure they have a name for it.) Like I said, I don't know much about it. Robbie course sounds like the way to go.

_________________
Joe Beaver
Maker of Sawdust


Top
 Profile  
 
PostPosted: Tue Jul 16, 2019 7:35 am 
Offline
Koa
Koa

Joined: Sun Oct 28, 2018 3:40 pm
Posts: 500
First name: Ernest
Last Name: Kleinman
City: Guthrie
State: OK
Zip/Postal Code: 73044
Country: United States
Focus: Build
Status: Professional
Tnx for posting john, am also building a FL based on the barbero plan from GAL. using a local exotic, birds eye willow wood. Will you be posting a sound clip in the future ??? tnx ernie. PS looks like a very nice FL. gtr.


Top
 Profile  
 
PostPosted: Thu Jul 18, 2019 9:04 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Mar 06, 2006 10:10 pm
Posts: 2476
Location: Argyle New York
First name: Mike/Mikey/Michael/hey you!
Last Name: Collins
City: Argyle
State: New York
Zip/Postal Code: 12809
Country: U.S.A. /America-yea!!
Focus: Build
Status: Professional
What pegs are you going to use?
A close up of the top purfling would be nice-looks great in the pics.

Strings?
I use either Hannabach Flamencos or Labella 820

mike

_________________
Mike Collins


Top
 Profile  
 
PostPosted: Thu Jul 18, 2019 9:41 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1701
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
Thanks Joe and Ernie,

I will post a sound clip, I have a spanish guitar friend who was trained as a flamenco player. Joe I did find the course useful; I have build a number of traditional classical guitars so I could have probably just built from plans, but I don't really have a feel for a flamenco guitar. I feared that no matter what the plans say I would be pushing toward a classical sound. Hearing the commentary during the top selection, thicknessing and top voicing and how and why to use tentallones may be helping me get a some clue.

Thanks Mike, Especially for the string recommendation. I have a set of Wittner Flamenco Finetune-Pegs that I plan to use. Here is a picture of the purfling scheme. It was just black-red-black, I wanted it to tie in the rosette and be simple.

Attachment:
purflings.jpg


You do not have the required permissions to view the files attached to this post.

_________________
http://www.Harvestmoonguitars.com



These users thanked the author johnparchem for the post (total 2): Pmaj7 (Mon Dec 02, 2019 1:51 am) • Ernie Kleinman (Fri Jul 19, 2019 7:00 am)
Top
 Profile  
 
PostPosted: Fri Jul 19, 2019 8:10 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Mar 06, 2006 10:10 pm
Posts: 2476
Location: Argyle New York
First name: Mike/Mikey/Michael/hey you!
Last Name: Collins
City: Argyle
State: New York
Zip/Postal Code: 12809
Country: U.S.A. /America-yea!!
Focus: Build
Status: Professional
did you make that purfling?
Or is it from a supply source-like Gurian?

Looks great.
Can't wait to hear it.
NOW -did you name this guitar?
Many "Flamencos" are given a name.

Mike

_________________
Mike Collins


Top
 Profile  
 
PostPosted: Fri Jul 19, 2019 9:42 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1701
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
Mike Collins wrote:
did you make that purfling?
Or is it from a supply source-like Gurian?

Looks great.
Can't wait to hear it.
NOW -did you name this guitar?
Many "Flamencos" are given a name.

Mike

Mike thank for your interest and comments!

I used strips I bought from LMI, so most likely Gurian. I ran each strip once between a block with sand paper and my bench to get it to fit just right in the channel I cut. The shell is zipflex.

Image

Now I need to come up with a name. I guess I will have to hear it first.

_________________
http://www.Harvestmoonguitars.com


Top
 Profile  
 
PostPosted: Sat Jul 20, 2019 1:43 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sun Feb 27, 2005 10:11 am
Posts: 2142
Hi John,
I am just about to french polish a Classical I've built(birdseye maple and Cedar top) and was wondering if you could give your thoughts/techniques on polishing around the bridge.
I am mostly a nitro guy, but the one classical that I built many years ago , I glued the bridge on after the french polish-masking the top.


Top
 Profile  
 
PostPosted: Sat Jul 20, 2019 7:11 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1701
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
Brad Goodman wrote:
Hi John,
I am just about to french polish a Classical I've built(birdseye maple and Cedar top) and was wondering if you could give your thoughts/techniques on polishing around the bridge.
I am mostly a nitro guy, but the one classical that I built many years ago , I glued the bridge on after the french polish-masking the top.


Brad, I think my picture is misleading I have not yet glued on the bridge, it is just pinned. I know there are some who French polish around the bridge, I mask, french polish and after a week or so glue on the bridge. I know some who finish with the bridge on, but I can never adequately blend in the areas around the bridge.

I finished the French Polish today.

Image

Image

_________________
http://www.Harvestmoonguitars.com


Top
 Profile  
 
PostPosted: Sat Jul 20, 2019 9:45 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sun Feb 27, 2005 10:11 am
Posts: 2142
johnparchem wrote:
Brad Goodman wrote:
Hi John,
I am just about to french polish a Classical I've built(birdseye maple and Cedar top) and was wondering if you could give your thoughts/techniques on polishing around the bridge.
I am mostly a nitro guy, but the one classical that I built many years ago , I glued the bridge on after the french polish-masking the top.


Brad, I think my picture is misleading I have not yet glued on the bridge, it is just pinned. I know there are some who French polish around the bridge, I mask, french polish and after a week or so glue on the bridge. I know some who finish with the bridge on, but I can never adequately blend in the areas around the bridge.

I finished the French Polish today.



Aha... Thanks

I knew some people did it with the bridge on.

It's hard enough to get around the heel/body juncture for me.


Top
 Profile  
 
PostPosted: Sun Dec 01, 2019 11:59 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1701
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
I noticed I never followed through with a video of the guitar being played. These recording are from an small informal concert Paco Chorobo performed at Robbie O'brien. He loved the sound of the guitar. It was an honor to have him play it.





Flamenco Blanca
Top: sitka spruce
back and sides: spanish cypress
bindings: Rocklite Sundari (yes I lied on the video)
back backstrip is East Indian Rosewood.
Neck: spanish cedar and laid up it ebony
Bridge and and peghead veneer Brazilian Rosewood.
Tuners: Wittner Finetune Flamenco

Image

Image

Image

Image

Image

Image

_________________
http://www.Harvestmoonguitars.com


Top
 Profile  
 
PostPosted: Sun Dec 01, 2019 12:15 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Sep 19, 2008 10:59 pm
Posts: 102
Location: San Diego CA
Beautiful work John. I'm getting near closing the box on my Paco course build. I was inspired to get the Paco course after I saw the video above of your guitar being played. Such a great flamenco sound!


Top
 Profile  
 
PostPosted: Sun Dec 01, 2019 12:36 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat May 22, 2010 10:32 am
Posts: 2616
First name: alan
Last Name: stassforth
City: Santa Rosa
State: ca
Zip/Postal Code: 95404
Country: usa
Focus: Build
Status: Amateur
Wow!
Beautiful!
I saw an f.p. video where the guy cut an eraser like this,
wrapped the cloth around it,
and used it to get into the corners.
Alan


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Mon Dec 02, 2019 2:09 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2246
Location: Seattle WA
Focus: Build
Status: Semi-pro
Looks and sounds great!

Pat

_________________
Pat


Top
 Profile  
 
PostPosted: Mon Dec 02, 2019 8:37 am 
Online
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1445
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
Wow-beautiful job John!

It’s always a pleasure hearing one’s creation in the hand of an accomplished player.

Love the red purflings!


Top
 Profile  
 
PostPosted: Mon Dec 02, 2019 9:09 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6232
Location: Virginia
Nice looking guitar John.

I just did a guitar with the bridge on. I cheated too! What I did was use a very nice 1in brush and paint the shellac on by dipping the brush in the shellac and wiping it off on the edge of the jar, both sides of the brush. So the brush is loaded but not dry. Then I deliberatly and carefully place the brush on the top right where the edge of the bridge and top meat then with one long stroke pull back all the way to the edge of the guitar, or the sound hole depending on what side of the bridge I am working on. That's it, just one stroke then let it dry.

I continue with that process till there is some build up. Then I wet sand using walnut oil and 1500 grit paper.

After that I do the traditional FP with a mouse pad, shellac, alcohol, and walnut oil. The trick when getting close to the bridge is to work in constant circles and as the pad starts to dry up move real fast banging the pad into the bridge. I think oil is very important here because if the pad sticks it ruins it and you are more or less polishing at this point and want fast and free motion. As you are making circles and you approach the corner of the bridge you will make swirls out from the corner so you can then reverse direction and bring the swirl back in. Keep doing it till the pad dries up then move faster and faster to polish it out.

If you get swirl marks jsut let it dry for a day or two then wet sand with oil and do it again.

It's always hard to explain FP technique but that worked for me anyway.


Top
 Profile  
 
PostPosted: Mon Dec 02, 2019 9:44 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Dec 14, 2007 3:21 pm
Posts: 3289
Location: Alexandria MN
Chapeau John!

_________________
It's not what you don't know that hurts you, it's what you do know that's wrong.


Top
 Profile  
 
PostPosted: Thu Dec 05, 2019 3:09 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1701
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
Thanks all for the kind comments and the tips for polishing close to the bridge.

_________________
http://www.Harvestmoonguitars.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 21 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Darrel Friesen, Michaeldc and 46 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com