Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 1:18 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 20 posts ] 
Author Message
 Post subject: Wipe on poly
PostPosted: Tue Aug 13, 2019 9:26 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3288
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
Hello,

I'm looking to use a wipe on poly for a tenor uke build. I've never done anything that isn't sprayed other than FP. I have some questions. I started with the SM wipe on poly but the reviews seem to indicate issues getting a finish with no bubbles. Reading about general woodworkers application of wipe on poly there is a lot of opinions. :)

For those with some experience on this topic...

1) Is a pore fill recommended first? If so, what type?
2) Is there a recommended vendor or just use the SM colortone offering (seems expensive compared to minwax, etc... is it really different?)
3) Recommended applicator? Seems that foam brushing caused some issues with the colortone.
4) Recommended sanding grit between coats?

Thanks as always. Hey, there should be a separate forum for finishing topics. :)

Brad

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
 Post subject: Re: Wipe on poly
PostPosted: Tue Aug 13, 2019 11:26 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Mon Jan 14, 2013 3:25 pm
Posts: 337
Location: Bozeman, MT
First name: Tony
Last Name: Thatcher
City: Bozeman
State: MT
I've used Minwax Whipe on Poly for years on furniture, window trim, etc. Only used the Satin version. Love the stuff! 220 grit between coats is fine. Just a light scuff. I've never tried it on an instrument, though. Pore filling is personal choice. If you like to see pores, don't worry about it. Otherwise, any of the standard pore filling techniques is fine. I just use a piece of old t-shirt, or a couple of gun cleaning patches to apply. 3 to 4 coats is all I've ever needed.

_________________
Tony Thatcher
Bozeman, Montana


Top
 Profile  
 
 Post subject: Re: Wipe on poly
PostPosted: Tue Aug 13, 2019 12:24 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Dec 18, 2008 11:42 am
Posts: 1135
Location: Hudson, MA
First name: Kevin
Last Name: Quine
City: Hudson
State: MA
Country: Usa
Focus: Build
Status: Amateur
Ditto on using Minwax and a cloth to apply it. Works fine especially for a small project. I just pour a few drops on the cloth and spread it around. One final pass with the grain to smooth everything out. Similar idea to applying FP without all the swirly swirly motion. 3 or 4 coats is plenty.

(who would use a foam brush for 'wipe-on' poly??)


Top
 Profile  
 
 Post subject: Wipe on poly
PostPosted: Tue Aug 13, 2019 1:09 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3288
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
Quine wrote:
(who would use a foam brush for 'wipe-on' poly??)


Thanks.

I thought the same. :) I was confused why it was recommended by SM.


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
 Post subject: Re: Wipe on poly
PostPosted: Sun Aug 18, 2019 11:23 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3288
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
Quick follow up:

Recommended way to mask the bridge? With FP I would mask but there was always build up around the edge of the tape. I’m thinking wiping this on the same will happen.

Should be just as easy to not mask and scrape this stuff back with a blade I suppose?


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
 Post subject: Re: Wipe on poly
PostPosted: Thu Aug 22, 2019 2:10 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Jun 30, 2009 3:20 pm
Posts: 456
Focus: Build
i'm just wrapping up an instrument with a wipe on poly finish. minwax satin. the client wanted wipe on poly and that's what she'll get -no pore fil. super thin, 6 coats on the body and neck, 3 on the top.

i apply all of my finishes with a muneca (square patch of old t-shirt, 3 or 4 cotton balls and a baggie tie) sanding between coats is via. scotch brite 7448 all the way up to final. don't use steel wool on waterbased finishes.



These users thanked the author arie for the post: bcombs510 (Thu Aug 22, 2019 2:17 pm)
Top
 Profile  
 
 Post subject: Re: Wipe on poly
PostPosted: Thu Aug 22, 2019 2:20 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3288
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
arie wrote:
i'm just wrapping up an instrument with a wipe on poly finish. minwax satin. the client wanted wipe on poly and that's what she'll get -no pore fil. super thin, 6 coats on the body and neck, 3 on the top.

i apply all of my finishes with a muneca (square patch of old t-shirt, 3 or 4 cotton balls and a baggie tie) sanding between coats is via. scotch brite 7448 all the way up to final. don't use steel wool on waterbased finishes.


That's a much finer between coat sanding than 220! I have to admit I was trying with 220 and the next coat wasn't removing the previous scratches. Perhaps I'll have to sand back a bit and go finer between coats?

Thanks for the reminder about the muneca. If nothing it will be easier to hold than the patches of cotton I am using now.

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
 Post subject: Re: Wipe on poly
PostPosted: Thu Aug 22, 2019 2:31 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Jun 30, 2009 3:20 pm
Posts: 456
Focus: Build
yeah, not a lot of build when you use an applicator pad and i find that 220 makes it too easy to cut down to raw wood especially on the edges. there's little lubrication in the stuff to float on so the coats are super thin. now if it were gorped on with a brush, you'd have some build to it but it would also be a bit milky looking as well.

i find wipe-on finishes with the bridge on to be a pita. thusly, i'll do the scrap and clean tactic. tuner slots on a slot head headstock are also picky as well.



These users thanked the author arie for the post: bcombs510 (Thu Aug 22, 2019 6:03 pm)
Top
 Profile  
 
 Post subject: Re: Wipe on poly
PostPosted: Thu Aug 22, 2019 7:38 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jul 24, 2005 7:12 am
Posts: 679
Location: United States
arie wrote:
i'm just wrapping up an instrument with a wipe on poly finish. minwax satin. the client wanted wipe on poly and that's what she'll get -no pore fil. super thin, 6 coats on the body and neck, 3 on the top.

i apply all of my finishes with a muneca (square patch of old t-shirt, 3 or 4 cotton balls and a baggie tie) sanding between coats is via. scotch brite 7448 all the way up to final. don't use steel wool on waterbased finishes.


So, you used Minwax Water Base Wipe on Poly in Clear Satin?

What are the pros and cons on oil based vs. water based wipe on poly? I have used the oil based, but not the water based.


Top
 Profile  
 
 Post subject: Re: Wipe on poly
PostPosted: Fri Aug 23, 2019 7:59 am 
Offline
Koa
Koa
User avatar

Joined: Tue Feb 26, 2008 6:19 am
Posts: 1322
First name: Richard
Last Name: Hutchings
City: Warwick
State: RI
Zip/Postal Code: 02889
Country: United States
Focus: Build
Status: Amateur
Cool thread, lets see some wipe on poly, oil and water guitars!

_________________
Hutch

Get the heck off the couch and go build a guitar!!!!


Top
 Profile  
 
 Post subject: Re: Wipe on poly
PostPosted: Fri Aug 23, 2019 9:58 am 
Offline
Cocobolo
Cocobolo

Joined: Tue Jun 30, 2009 3:20 pm
Posts: 456
Focus: Build
James Burkett wrote:
arie wrote:
i'm just wrapping up an instrument with a wipe on poly finish. minwax satin. the client wanted wipe on poly and that's what she'll get -no pore fil. super thin, 6 coats on the body and neck, 3 on the top.

i apply all of my finishes with a muneca (square patch of old t-shirt, 3 or 4 cotton balls and a baggie tie) sanding between coats is via. scotch brite 7448 all the way up to final. don't use steel wool on waterbased finishes.


So, you used Minwax Water Base Wipe on Poly in Clear Satin?

What are the pros and cons on oil based vs. water based wipe on poly? I have used the oil based, but not the water based.


couldn't say about pros & cons of the two finishes -sorry. never used the oil version. first thing that comes to mind is that i suspect that the waterbased version is a whole lot easier to clean up and probably smells less. personally, i don't like wop for instruments, nor poly in general -i prefer oil varnish, but it's ok for furniture and it's low toxicity is a plus imo.


Top
 Profile  
 
 Post subject: Re: Wipe on poly
PostPosted: Tue Aug 27, 2019 8:59 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3288
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
I have all the coats on. Honestly, it looks pretty good. I did more coats but thinner.

How long should I let it sit before level and buffing? I read anywhere from 24 hours to two weeks online. Usually that means a week. :D

The only regret so far is I should have filled the pores, but it looked pretty good.


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
 Post subject: Re: Wipe on poly
PostPosted: Tue Aug 27, 2019 9:00 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3288
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
Image


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
 Post subject: Re: Wipe on poly
PostPosted: Tue Aug 27, 2019 9:15 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Mon Jan 14, 2013 3:25 pm
Posts: 337
Location: Bozeman, MT
First name: Tony
Last Name: Thatcher
City: Bozeman
State: MT
Looks great! Satin? If so, then no buffing. If gloss, I'd give it at least a week, no matter what the instructions say.

Sent from my SM-G920V using Tapatalk

_________________
Tony Thatcher
Bozeman, Montana


Top
 Profile  
 
 Post subject: Re: Wipe on poly
PostPosted: Tue Aug 27, 2019 9:25 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3288
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
Thanks. Ok, I will wait a week.

I plan to level and buff it up. It’s the gloss formula from SM.


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
 Post subject: Re: Wipe on poly
PostPosted: Thu Aug 29, 2019 5:43 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3288
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
A question - I noticed a gap in the rosette that I hadn’t seen until now. Like I mentioned above I wish I had pore filled before using the poly. I spotted this gap and thought about just filling and leveling with CA. That got me thinking about going ahead and pore filling the entire rosette. Shouldn’t be a problem, right? So a normal CA porefill in that area and then hit it with a few coats of poly?

Image

The gap is on the inside purfling ring in the center of the pic.


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
 Post subject: Re: Wipe on poly
PostPosted: Thu Aug 29, 2019 11:35 pm 
Offline
Mahogany
Mahogany

Joined: Mon Dec 22, 2008 7:22 pm
Posts: 88
First name: doug
Last Name: powdrell
City: hilo
State: big island
Focus: Build
Status: Amateur
yeah, CA, scrape with razor blade, finish rosette area and possibly entire soundboard depending on how well it blends.......my $0.02......



These users thanked the author powdrell for the post: bcombs510 (Fri Aug 30, 2019 6:00 am)
Top
 Profile  
 
 Post subject: Re: Wipe on poly
PostPosted: Fri Aug 30, 2019 6:30 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Oct 31, 2014 9:33 pm
Posts: 305
Location: Mount Vernon, Ohio
First name: Greg
Last Name: Maxwell
City: Mount Vernon
State: Ohio
Country: USA
Focus: Build
Status: Professional
I would use Gluboost Fill N finish thin formula. It is made for this kind of task.

_________________
It will probably be alright.



These users thanked the author Greg Maxwell for the post: bcombs510 (Fri Aug 30, 2019 6:33 am)
Top
 Profile  
 
 Post subject: Re: Wipe on poly
PostPosted: Fri Aug 30, 2019 9:42 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5398
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Me too, just got some more.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.



These users thanked the author Colin North for the post: bcombs510 (Fri Aug 30, 2019 10:14 am)
Top
 Profile  
 
 Post subject: Wipe on poly
PostPosted: Mon Sep 02, 2019 9:43 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3288
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
The CA worked well but as I was leveling it back I went through in some spots.

Would you recommend a light coat of CA like I do with Z-poxy to balance out the color or take it all back to wood?

If I take the rosette back to wood I should take the top back too? Any concerns with witness lines? I was thinking just take the rosette back to wood with 220 and then more coats of poly over the whole thing. I want to avoid taking the whole top back to wood, as long as it won’t cause problems down the road.

Appreciate the help!!


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: DennisK, nashrb and 43 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com