Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 1:19 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: Surface thermometer
PostPosted: Fri Oct 04, 2019 8:21 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Mar 17, 2017 8:42 pm
Posts: 388
First name: Pierre
Last Name: Castonguay
City: Québec, Qc
Country: Canada
Focus: Repair
Status: Semi-pro
Hello friends,

For those that do use them, what do you guys and gals use as surface thermometers? StewMac has one, is that the only game in town? Anyone using one of those cheap infrared gun types?


Pierre
Guitares Torvisse


Top
 Profile  
 
 Post subject: Re: Surface thermometer
PostPosted: Fri Oct 04, 2019 2:06 pm 
Offline
Koa
Koa

Joined: Mon Oct 17, 2011 4:10 pm
Posts: 634
First name: Bob
Last Name: Gramann
City: Fredericksburg
State: VA
Zip/Postal Code: 22408
Country: USA
Focus: Build
Status: Professional
I have used both the bimetal one like stewmac’s and the electronic one. The bimetal curl thermometer seems to report close to the correct temperature (at least of the air near the surface) but I have never calibrated it against something known like boiling water. The electronic one with the laser pointer reflects off of anything metal so it won’t give accurate readings of my bending iron. While I was curious to see what temperatures I was bending at, I still go with how the bend feels to know if the temperature is sufficient. I rarely use either thermometer in my shop although I have them.


Top
 Profile  
 
 Post subject: Re: Surface thermometer
PostPosted: Sat Oct 05, 2019 10:49 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Mar 17, 2017 8:42 pm
Posts: 388
First name: Pierre
Last Name: Castonguay
City: Québec, Qc
Country: Canada
Focus: Repair
Status: Semi-pro
I'd primarily use it to unglue fingerboard and lifting bridges, and I'm typically using a clothes iron or light bulbs, so metal temp is not a strong concern for me.


Pierre
Guitares Torvisse


Top
 Profile  
 
 Post subject: Re: Surface thermometer
PostPosted: Sun Oct 06, 2019 8:04 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Mar 17, 2017 8:42 pm
Posts: 388
First name: Pierre
Last Name: Castonguay
City: Québec, Qc
Country: Canada
Focus: Repair
Status: Semi-pro
Anyone else has experience with surface thermometers for my intended purpose?


Pierre
Guitares Torvisse


Top
 Profile  
 
 Post subject: Re: Surface thermometer
PostPosted: Sun Oct 06, 2019 1:51 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7241
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
IR thermometers will read the surface temperature of just about anything. We used them at work for years to check for hot spots in our machines; I use one in the shop primarily when removing bridges and fretboards with a heatlamp.

_________________
Steve Smith
"Music is what feelings sound like"



These users thanked the author SteveSmith for the post: Smylight (Sun Oct 06, 2019 4:11 pm)
Top
 Profile  
 
 Post subject: Re: Surface thermometer
PostPosted: Sun Oct 06, 2019 4:12 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Mar 17, 2017 8:42 pm
Posts: 388
First name: Pierre
Last Name: Castonguay
City: Québec, Qc
Country: Canada
Focus: Repair
Status: Semi-pro
SteveSmith wrote:
IR thermometers will read the surface temperature of just about anything. We used them at work for years to check for hot spots in our machines; I use one in the shop primarily when removing bridges and fretboards with a heatlamp.


Exactly what I was looking for. Thanks Steve. So those cheap IR units will do the job, I suppose?


Pierre
Guitares Torvisse


Top
 Profile  
 
 Post subject: Re: Surface thermometer
PostPosted: Sun Oct 06, 2019 5:46 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7241
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
They're not dependable for high accuracy but they'll give you a good general idea of the temp in an area.

_________________
Steve Smith
"Music is what feelings sound like"



These users thanked the author SteveSmith for the post: Smylight (Sun Oct 06, 2019 9:02 pm)
Top
 Profile  
 
 Post subject: Re: Surface thermometer
PostPosted: Sun Oct 06, 2019 9:02 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Mar 17, 2017 8:42 pm
Posts: 388
First name: Pierre
Last Name: Castonguay
City: Québec, Qc
Country: Canada
Focus: Repair
Status: Semi-pro
Great, thanks.


Pierre
Guitares Torvisse


Top
 Profile  
 
 Post subject: Re: Surface thermometer
PostPosted: Mon Oct 07, 2019 10:55 am 
Offline
Koa
Koa
User avatar

Joined: Tue Oct 17, 2006 3:52 am
Posts: 1242
City: Lawrence
State: Kansas
Zip/Postal Code: 66047
Status: Amateur
Steve, Do you think they would be +/- 10 degrees ? THANKS
SteveSmith wrote:
They're not dependable for high accuracy but they'll give you a good general idea of the temp in an area.

_________________
Say what you do, Do what you say.


Top
 Profile  
 
 Post subject: Re: Surface thermometer
PostPosted: Mon Oct 07, 2019 12:45 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Feb 17, 2013 4:58 pm
Posts: 1449
First name: Ed
Last Name: Minch
City: Chestertown
State: MD
Zip/Postal Code: 21620
Country: United States
Focus: Build
Status: Amateur
It's been 7 years since I retired, but my company performed infrared scans of various things. We used hand held scanners for many things, and the small pistol grip infrared thermometers for others. The small ones you can by locally, like this one

https://www.lowes.com/pd/Digital-Temperature-Meter/3028851

were within about 1.5 degrees of accurate. You have to understand a little about infrared, but generally it depends on the surface you are scanning. Metal and glass don't register accurately, but things like wood, plastic, drywall, paint are pretty close. Just don't get the laser aiming light anywhere near metal and you should be OK

And things may have changed in the last 7 years.

Ed



These users thanked the author Ruby50 for the post: Smylight (Tue Oct 08, 2019 7:47 am)
Top
 Profile  
 
 Post subject: Re: Surface thermometer
PostPosted: Mon Oct 07, 2019 1:16 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7241
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Dave Rickard wrote:
Steve, Do you think they would be +/- 10 degrees ? THANKS
SteveSmith wrote:
They're not dependable for high accuracy but they'll give you a good general idea of the temp in an area.
Like Ed said, within a few degrees. The cheap one I use in the shop I figure is within 5 degrees. Main thing to keep in mind is what you are measuring is the temperature at the surface.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Bing [Bot] and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com