Official Luthiers Forum!
https://luthiersforum.com/forum/

Binding and purfling storage
https://luthiersforum.com/forum/viewtopic.php?f=10101&t=56065		 Page 2 of 2
Author:  Ed Haney [ Tue Jan 02, 2024 9:06 pm ]
Post subject:  Re: Binding and purfling storage
Brad,
It is interesting that you landed on the same approach I used a few years. Namely, the is space UNDER shelves is often not used. I used PVC, some of which hold the 65" long binding/purfling strips I just put tape over one end of the PVC pipe/tube to keep them from going out the one end. They are running along the shelf, parallel to the wall allowing for the long length.
Author:  bcombs510 [ Tue Jan 02, 2024 9:23 pm ]
Post subject:  Re: Binding and purfling storage
Nothing is new, thats for sure. :) If you posted pics I’ve probably seen them. I trolled the archives quite a bit for ideas. I’m super glad to have this stuff up and out of the corner!


Sent from my iPhone using Tapatalk Pro
Author:  rbuddy [ Tue Jan 30, 2024 1:22 pm ]
Post subject:  Re: Binding and purfling storage
Finally got around to updating my storage for bindings, CF, brace woods and other long skinny stuff.

Late but done.

It wasn't cheap to do but it was what I wanted. Not only a huge improvement but a lot more stuff is in the same space previously occupied with cardboard mailing tubes of all sizes.

Before and after pics -

Attachment:
DSCN4670S.jpg


Attachment:
DSCN4692S.jpg
Author:  bcombs510 [ Tue Jan 30, 2024 1:38 pm ]
Post subject:  Re: Binding and purfling storage
I love the fact that they are clear! Nice work.


Sent from my iPhone using Tapatalk Pro
Author:  Kbore [ Tue Jan 30, 2024 8:34 pm ]
Post subject:  Re: Binding and purfling storage
Bravo! Very nice.
Page 2 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/