| Official Luthiers Forum! https://luthiersforum.com/forum/ |
|
| Table Saw/Workbench in a very small shop https://luthiersforum.com/forum/viewtopic.php?f=10101&t=54692 |
Page 1 of 1 |
| Author: | ballbanjos [ Wed Jan 12, 2022 8:20 pm ] |
| Post subject: | Table Saw/Workbench in a very small shop |
My shop is really small, but I still have a few relics of my cabinet/furniture making days that I'm not willing to give up. My old Unisaw is one of those. I don't use a table saw really often in instrument making, but when I do it's a really important tool. But, it takes up a lot of space. Mine has become one of my main workbenches when I'm not sawing with it. I have a router table extension on the saw that comes in handy and it has a T track slot in it that I use to hold down one of the Rockler T track tables. I put dang near everything on this T track table. It's my pearl cutting bench, my platform for mounting a disc sander and other tools like that, my binding routing table (as shown in the picture). Great all purpose table. Plus, I can undo two T track hold downs, and quickly regain a table saw and a router table. Dave |
|
| Author: | Durero [ Thu Jan 13, 2022 2:23 am ] |
| Post subject: | Re: Table Saw/Workbench in a very small shop |
Really like your setup! Very cool magnifying lamp too. Is that a vintage thing? I really love my magnifying lamps! |
|
| Author: | ballbanjos [ Thu Jan 13, 2022 6:04 am ] |
| Post subject: | Re: Table Saw/Workbench in a very small shop |
Yep, its an old lamp but with a new LED circle light in it. I use it when I'm cutting inlays mostly. Dave |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|