| Official Luthiers Forum! https://luthiersforum.com/forum/ |
|
| Custom Pearl Logo Source https://luthiersforum.com/forum/viewtopic.php?f=10101&t=54714 |
Page 1 of 1 |
| Author: | mountain whimsy [ Thu Jan 20, 2022 5:45 pm ] |
| Post subject: | Custom Pearl Logo Source |
Hi all. Who do you use to cut custom logos? Mine is a very simple stylized 'M', so shouldn't be too difficult. I usually cut them myself, but would love to offload the task. Thanks! |
|
| Author: | bluescreek [ Thu Jan 20, 2022 6:15 pm ] |
| Post subject: | Re: Custom Pearl Logo Source |
andy depaulle |
|
| Author: | SteveSmith [ Thu Jan 20, 2022 7:51 pm ] |
| Post subject: | Re: Custom Pearl Logo Source |
Depaule made a batch for me back when I was using them. Nice work and not terribly expensive either. |
|
| Author: | bcombs510 [ Fri Jan 21, 2022 10:50 am ] |
| Post subject: | Re: Custom Pearl Logo Source |
Check with Andy Birko / Birkonium as well. Andy can cut the logo and also a pocket in the headplate so all you have to do is drop it in. |
|
| Author: | mountain whimsy [ Fri Jan 21, 2022 1:30 pm ] |
| Post subject: | Re: Custom Pearl Logo Source |
Thanks, all! Both were on my list, but curious if there were other options. -T |
|
| Author: | Brad Goodman [ Fri Jan 21, 2022 7:10 pm ] |
| Post subject: | Re: Custom Pearl Logo Source |
I have always used Tom Ellis of Precision Pearl-great quality and price. |
|
| Author: | Terence Kennedy [ Sat Jan 22, 2022 5:59 pm ] |
| Post subject: | Re: Custom Pearl Logo Source |
Another vote for Precision Pearl. |
|
| Author: | mountain whimsy [ Sat Jan 22, 2022 10:00 pm ] |
| Post subject: | Re: Custom Pearl Logo Source |
More thanks. Ill add Precision Pearl to my list. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|