Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Mar 29, 2024 1:25 am


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 16 posts ] 
Author Message
 Post subject: Band Saw Recommendations
PostPosted: Sat Jun 18, 2022 10:44 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Sep 14, 2013 9:46 pm
Posts: 755
Location: Napa Valley
First name: David
Last Name: Foster
City: Napa
State: CA
Zip/Postal Code: 94558
Country: USA
Focus: Build
Status: Amateur
Hello all,

I'm looking for band saw recommendations. I'd like to be able to do a little resawing when necessary. Maybe in the $2,000 range, but not a requirement.

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/


Top
 Profile  
 
PostPosted: Sat Jun 18, 2022 4:08 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7221
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional
If you’re looking for something with a smaller footprint, the Laguna 14SUV is pretty nice. I resaw with it frequently and it does a great job, if paired with the Resaw King blade. The downside is that the blade is 250$ and is basically the only blade available that will effectively run on its for resaw. Other blades can’t handle the 14”wheels without fatiguing. Rikon makes a similar saw, but the Laguna has ceramic guide blocks.

If size is not an issue I would certainly look for a bigger one…



These users thanked the author meddlingfool for the post: dofthesea (Sun Sep 18, 2022 10:10 pm)
Top
 Profile  
 
PostPosted: Sat Jun 18, 2022 4:33 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Jun 22, 2007 11:14 am
Posts: 1011
Location: Newland, North Carolina
I have an 18 inch JET that I've used for years--I put Laguna ceramic guide blocks on mine--the stock guides were pretty bad. I'm quite happy with it. It resaws fine--I use a 3/4 inch Infinity Rip blade. I don't do a lot of resawing though.

Edit--I'll add that for me, moving from a 14" saw to an 18" saw was more about throat depth than it was resaw capacity. Banjo pegheads are cut perpendicular to the fingerboard surface, not the peghead face. I needed more throat depth to cut some of these without running the shaft of the neck into the other side of the saw while cutting pegheads. A couple of buddies of mine have the high end Laguna 14" saws, and they're really nice. If I didn't need the extra throat depth, and if they had been available at the time, they would have probably been my choice.

Dave


Last edited by ballbanjos on Sat Jun 18, 2022 6:56 pm, edited 1 time in total.


These users thanked the author ballbanjos for the post: dofthesea (Sun Sep 18, 2022 10:10 pm)
Top
 Profile  
 
PostPosted: Sat Jun 18, 2022 4:52 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Dec 17, 2013 10:52 pm
Posts: 2953
First name: Don
Last Name: Parker
City: Charleston
State: West Virginia
Zip/Postal Code: 25314
Country: USA
Focus: Build
Status: Amateur
I bought one of these used, and I like it:

https://www.woodcraft.com/products/jet- ... LEQAvD_BwE

It’s a Jet 14” bandsaw with extra features, like a riser block and bearing blade guides, already on there, so you don’t have to add them. It does fine for anything I do that is guitar related. I resaw neck blanks with it, but I don’t try to resaw tops or backs. Maybe it could handle those, but I haven’t tried. It’s a decent quality bandsaw. There are better ones out there, but they cost more.



These users thanked the author doncaparker for the post: dofthesea (Sun Sep 18, 2022 10:11 pm)
Top
 Profile  
 
PostPosted: Sun Jun 19, 2022 8:20 am 
Offline
Contributing Member
Contributing Member

Joined: Thu Feb 06, 2014 6:19 pm
Posts: 163
First name: Tom
Last Name: Armstrong
City: Portsmouth
State: Virginia
Zip/Postal Code: 23701
Country: United States
Focus: Build
Status: Amateur
I have a first generation Rikon 18”. It didn’t receive good reviews due to its tensioning mechanism but after 15+ years I’ve had no issue with that. Not sure of their customer service today but when I bought the saw it was not starting without making a humming noise like it was straining to start. I contacted their CS who transferred me to an engineer. He listened to it start (over the phone) and diagnosed it as a bad capacitor. Within three days they sent me an entirely new motor. I bought and changed the capacitor and the new motor still sits in my shop unused.
I have resawn many a side and back set using a Lenox Woodmaster 3/4” blade. Cuts like a champ even after all these years.



These users thanked the author Gasawdust for the post: dofthesea (Sun Sep 18, 2022 10:11 pm)
Top
 Profile  
 
PostPosted: Sun Jun 19, 2022 10:04 am 
Offline
Koa
Koa

Joined: Mon Oct 17, 2011 4:10 pm
Posts: 634
First name: Bob
Last Name: Gramann
City: Fredericksburg
State: VA
Zip/Postal Code: 22408
Country: USA
Focus: Build
Status: Professional
+1 on the Rikon 18” with the Lenox Woodmaster blade. I’ve had one for a long time. It’s adequate for resawing. Now, I might spend twice as much as I did then for a better saw, but I don’t know what it would be. I kept a 12” saw for the finer stuff so I don’t have to change blades for different tasks.

Before I bought the Rikon, I was using a Delta clone (Buffalo) with a riser block. It wasn't up to serious resawing—the frame flexed and it couldn’t handle carbide blades.



These users thanked the author bobgramann for the post: dofthesea (Sun Sep 18, 2022 10:11 pm)
Top
 Profile  
 
PostPosted: Tue Jun 21, 2022 1:03 pm 
Offline
Walnut
Walnut

Joined: Mon Apr 18, 2022 2:45 pm
Posts: 15
Location: Atlanta, GA
First name: Grant
I use a 17" 2hp Grizzly with a 3/4" Timberwolf blade for resawing and it does a fantastic job. The default blade guides on the saw arent great, specifically the top guide for the back of the blade. It could just be that the one on my saw is worn from the previous owner too. Either way, its a fairly easy fix with some good third party replacement options available.


Top
 Profile  
 
PostPosted: Tue Jun 21, 2022 6:32 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Mar 06, 2006 10:10 pm
Posts: 2477
Location: Argyle New York
First name: Mike/Mikey/Michael/hey you!
Last Name: Collins
City: Argyle
State: New York
Zip/Postal Code: 12809
Country: U.S.A. /America-yea!!
Focus: Build
Status: Professional
Rikon!

period

_________________
Mike Collins


Top
 Profile  
 
PostPosted: Tue Jun 21, 2022 7:03 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Feb 02, 2008 12:15 pm
Posts: 474
Location: Santa Barbara, Ca
First name: John "jd"
City: Santa Barbara
State: Ca
Focus: Build
Status: Semi-pro
In my experience Timberwolves blades are short lived junk. Once the start to warm up they lose their set and then they really get hot and fail. On my saw Lennox dimaster blades last many times longer and give cleaner cuts


Top
 Profile  
 
PostPosted: Wed Jun 22, 2022 9:45 am 
Offline
Koa
Koa
User avatar

Joined: Sat Aug 19, 2006 1:29 am
Posts: 1378
Location: United States
If you have a comfort with some level of tinkering I'd look at older machines. $2,000 could get you quite a nice larger vintage bandsaw that would outperform a newer one if tuned up nicely.

_________________
Burton
http://www.legeytinstruments.com
Brookline, MA.



These users thanked the author Burton LeGeyt for the post: dofthesea (Sun Sep 18, 2022 10:11 pm)
Top
 Profile  
 
PostPosted: Thu Jun 23, 2022 12:17 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 24, 2007 2:45 pm
Posts: 1271
Location: Calgary, Canada
Status: Amateur
Check out the Harvey bandsaws. They get great reviews on the woodworking groups. The 14" Ambassador is 3 HP, almost 400 lbs and under 2k. I'd buy one over a Laguna.

https://www.harveywoodworking.com/colle ... dkEALw_wcB


Top
 Profile  
 
PostPosted: Thu Jun 23, 2022 1:31 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7221
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional
TBH, that Harvey looks like a rebadged Laguna. Same saw…


Top
 Profile  
 
PostPosted: Thu Jun 23, 2022 7:08 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 24, 2007 2:45 pm
Posts: 1271
Location: Calgary, Canada
Status: Amateur
meddlingfool wrote:
TBH, that Harvey looks like a rebadged Laguna. Same saw…

Harvey built a large amount of Pacific rim tools to various levels of quality including many Laguna models. It's what you spec. The best Harvey's are as good as the best Italian Laguna's by all accounts.


Top
 Profile  
 
PostPosted: Sat Jun 25, 2022 4:01 pm 
Offline
Koa
Koa

Joined: Mon Feb 13, 2012 8:49 pm
Posts: 952
First name: peter
Last Name: havriluk
City: granby
State: ct
Zip/Postal Code: 06035
Country: usa
Focus: Build
Status: Amateur
Question for OP: How important is a resawing capability? Saws mentioned are beautiful machines, weigh a ton and cost a fortune. If resawing is a someday possibility, I suggest leaving it to the future and buying a saw that will do everything but resawing nicely. Less than $500 all day. I did just that and my Rikon's very useful for everything but resawing. Besides if resawing does become needed, the saw may well stay set up for resawing, leaving the non-resaw available for what it does (everything but resawing).

A thought. And you have it tomorrow.

_________________
Peter Havriluk



These users thanked the author phavriluk for the post: rbuddy (Sat Jun 25, 2022 5:11 pm)
Top
 Profile  
 
PostPosted: Sat Jun 25, 2022 6:34 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Sep 14, 2013 9:46 pm
Posts: 755
Location: Napa Valley
First name: David
Last Name: Foster
City: Napa
State: CA
Zip/Postal Code: 94558
Country: USA
Focus: Build
Status: Amateur
I really need to be able to resew. I have a ton of billets that I've been storing.

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/


Top
 Profile  
 
PostPosted: Sat Jun 25, 2022 7:26 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jun 02, 2013 8:16 am
Posts: 359
First name: Brian
City: U.P.
State: Michigan
Focus: Build
This was a good thread from a year ago ——- viewtopic.php?f=10101&t=54606&p=716915&hilit=Bandsaw+recommendations#p716915

Covered a lot of ground.

_________________
Brian R, Wood Mechanic
N8ZED



These users thanked the author rbuddy for the post: dofthesea (Sun Sep 18, 2022 10:12 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 16 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Juergen and 50 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com