| Official Luthiers Forum! https://luthiersforum.com/forum/ |
|
| Source for burls https://luthiersforum.com/forum/viewtopic.php?f=10101&t=55331 |
Page 1 of 1 |
| Author: | SnowManSnow [ Sat Nov 05, 2022 1:57 pm ] |
| Post subject: | Source for burls |
I’d like to use some burl wood for some accents on the next few guitars i have planned… maybe end wedge, possibly headstock and or rosettes.., is there a good place to find burl that would work? I’ve looked eBay but im not sure if it’s the best for the dimensions I would have to have … Thanks b Sent from my iPhone using Tapatalk |
|
| Author: | Barry Daniels [ Sat Nov 05, 2022 2:23 pm ] |
| Post subject: | Re: Source for burls |
Assuming you can use veneer thickness, search eBay for "burl veneer" and you will find tons of stuff. |
|
| Author: | Chris Pile [ Sat Nov 05, 2022 2:27 pm ] |
| Post subject: | Re: Source for burls |
I highly recommend Tom Volpe at thinwoodsandoldtools on Squeebay. I've purchased a ton of veneer from him. Tom will work with you on shipping when you make sizable orders, and he often tosses in a few free veneers just for fun. https://www.ebay.com/sch/thinwoodandold ... 492.l71970 |
|
| Author: | dzsmith [ Sat Nov 05, 2022 4:51 pm ] |
| Post subject: | Re: Source for burls |
I’ve bought a bunch of veneer from veneersupplies.com. I don’t think they have a minimum order size. |
|
| Author: | CarlD [ Sun Nov 06, 2022 2:49 pm ] |
| Post subject: | Re: Source for burls |
I've been using Manzanita burl for that. I've found several while brush clearing for wildfire protection on the property here. Just sold several slices at a community yard sale here for $3/piece. PM me if you're interested in some. Attachment: burl 6.jpg Attachment: burl crosscut3.jpg Attachment: burl rosetteblank3.jpg Attachment: burl rip h2o.jpg
|
|
| Author: | Mike OMelia [ Mon Nov 28, 2022 11:52 am ] |
| Post subject: | Re: Source for burls |
This is a perfectly timed post. I have three cherry burls and would be interested how to cut them. May even be able to seel some here. One is really big! |
|
| Author: | CarlD [ Wed Nov 30, 2022 9:36 pm ] |
| Post subject: | Re: Source for burls |
Here's some pics of the jig I use to slice up some of my local wood. It's ugly, crude and I keep telling myself to rebuilt it, but then another piece of wood comes along so I break it out again. It's worked for 36" logs to 6" burls for the first two cuts to establish 90 degree planes for further slicing. I have no idea where I got the clamp set. Maybe it's a beam clamp? The holes are mostly set on 2" centers but 1" would make for quicker setups. Both ends are anchored with the screws to prevent rotation of what's being cut. Use 1" carbide blade, 18" bandsaw. Attachment: bsjig2.jpg Attachment: bsjig3.jpg Attachment: bsjig4.jpg Attachment: bsjig7.jpg Attachment: bsjig8.jpg Attachment: bsjig9.jpg Attachment: bsjig10.jpg Attachment: bsjig11.jpg
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|