| Official Luthiers Forum! https://luthiersforum.com/forum/ |
|
| Braces on a plan https://luthiersforum.com/forum/viewtopic.php?f=10101&t=55437 |
Page 1 of 1 |
| Author: | Ken Nagy [ Wed Jan 04, 2023 6:23 pm ] |
| Post subject: | Braces on a plan |
Well actually two plans. The first is the Vihuela plan. I can't figure what is going on at the end of the TWO cross braces. That's it. It does go from 3.5 to 2mm or so thickness, so there is more going on. Attachment: IMG_1208.jpg Attachment: IMG_1209.jpg The second is the same sort of thing on a Panormo. Attachment: IMG_1206.jpg Attachment: IMG_1207.jpg I guess the glass on my bench needs to be replaced! What's going on here? |
|
| Author: | Ken Nagy [ Wed Jan 04, 2023 6:59 pm ] |
| Post subject: | Re: Braces on a plan |
Well I found pictures. Apparently they go up the side! I never saw that before. https://www.historicalguitars.co.uk/latest |
|
| Author: | Michaeldc [ Wed Jan 04, 2023 7:06 pm ] |
| Post subject: | Re: Braces on a plan |
Ken Nagy wrote: Well I found pictures. Apparently they go up the side! I never saw that before. https://www.historicalguitars.co.uk/latest I was just going to suggest that they might be brace end cleats ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up") Cheers, M |
|
| Author: | Barry Daniels [ Sun Jan 08, 2023 8:52 am ] |
| Post subject: | Re: Braces on a plan |
Either represents the scallop on the end of the brace or the cross section. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|