Official Luthiers Forum! https://luthiersforum.com/forum/
Another thin strip jig for the tablesaw https://luthiersforum.com/forum/viewtopic.php?f=10101&t=57390	Page 1 of 1

---

Author:	Darrel Friesen [ Fri Oct 24, 2025 8:55 am ]
Post subject:	Another thin strip jig for the tablesaw
There are many designs out there. I thought this one was pretty clever. https://youtu.be/wBofSYOV5lg?si=dutuf2qPRBGbbcfn

---

Author:	RusRob [ Fri Oct 24, 2025 1:15 pm ]
Post subject:	Re: Another thin strip jig for the tablesaw
Thanks for posting that vid Darrel, I have a setup for doing the same thing but it doesn't have the riving knife. Maybe I need to re-do mine... Cheers, Bob

---

Author:	Hemessy [ Fri Oct 24, 2025 4:24 pm ]
Post subject:	Re: Another thin strip jig for the tablesaw
Yeah, that’s a pretty slick design! Simple but really well thought out.

---

Author:	jac68984 [ Sun Nov 02, 2025 5:41 pm ]
Post subject:	Re: Another thin strip jig for the tablesaw
Very nice!

---

Page 1 of 1	All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/