peterm wrote:
I have it. Pretty nice...
But Turbocad at $79 was pretty appealing!
But Turbocad at $79 was pretty appealing!
A rock is just a fraction of the price of a hammer, but after 50 nails or so one starts to see the light.
| Official Luthiers Forum! https://luthiersforum.com/forum/ |
|
| Anyone using TurboCad? https://luthiersforum.com/forum/viewtopic.php?f=10106&t=40013 |
Page 1 of 1 |
| Author: | peterm [ Wed Apr 10, 2013 12:48 am ] |
| Post subject: | Anyone using TurboCad? |
Just came across a great deal on Macupdate for any of the TurboCad versions for Mac. I have Rhino for windows but no Cad program for Mac. Anyone care to share any thoughts? Thanks! |
|
| Author: | Kevin Waldron [ Wed Apr 10, 2013 2:54 pm ] |
| Post subject: | Re: Anyone using TurboCad? |
Peter, We use Turbocad for all our 2D drawing.... there are some quarks but we have no problem going back and forth between several different cad programs. It does 3D fairly well but the fact that it is all menu/icon driven for 3D for me is a draw back....... (we use Rhino for 3D and often type the command) The latest addition does have an Autocad Lt mode that allows you to type commands but haven't tried any 3D commands...... There is not much Turbocad can't read/write in the way of cad files. We have been with Turbocad since version 11..... so fairly familiar with it quarks......We also have Autocad 2010 and do sometime use it but personally have gotten use the Turbocad and the files work well for translation to Corel for our laser cutting. All in all a good program for the money. We also have Corelcad which I think is available for Mac but 3D is limited. Blessings, Kevin |
|
| Author: | peterm [ Thu Apr 11, 2013 1:17 am ] |
| Post subject: | Re: Anyone using TurboCad? |
Thanks Kevin, I appreciate the input. I may give them a try. |
|
| Author: | Sheldon Dingwall [ Sun Apr 14, 2013 12:27 pm ] |
| Post subject: | Re: Anyone using TurboCad? |
Rhino has a beta Mac version. http://blog.rhino3d.com/search?q=Mac |
|
| Author: | peterm [ Wed Apr 17, 2013 12:06 am ] |
| Post subject: | Re: Anyone using TurboCad? |
I have it. Pretty nice... But Turbocad at $79 was pretty appealing! |
|
| Author: | Sheldon Dingwall [ Wed Apr 17, 2013 2:31 pm ] |
| Post subject: | Re: Anyone using TurboCad? |
peterm wrote: I have it. Pretty nice... But Turbocad at $79 was pretty appealing! If it will do everything you need, it's a great deal. If not the real cost is the the learning and re-learning something else curve. A healthy users forum is another pretty important consideration for when you get stuck. |
|
| Author: | Bob Garrish [ Wed Apr 17, 2013 10:10 pm ] |
| Post subject: | Re: Anyone using TurboCad? |
peterm wrote: I have it. Pretty nice... But Turbocad at $79 was pretty appealing! A rock is just a fraction of the price of a hammer, but after 50 nails or so one starts to see the light.
|
|
| Author: | weslewis [ Mon Apr 29, 2013 10:33 pm ] |
| Post subject: | Re: Anyone using TurboCad? |
anyone using v 18 with the cam plug in on windows 8?????? |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|