| Official Luthiers Forum! https://luthiersforum.com/forum/ |
|
| please verify terminal pinouts- thanks! https://luthiersforum.com/forum/viewtopic.php?f=10123&t=53069 |
Page 1 of 1 |
| Author: | the_doc735 [ Sat Apr 04, 2020 3:50 am ] |
| Post subject: | please verify terminal pinouts- thanks! |
please verify terminal pinouts- thanks! ...does anyone know the pinout order for the traditional style push/pull? 1 1c 2 3 2c 4 [/attachment] Attachment: 2x Bourns Audio A500K 500K Push-Pull Control Tone Pot short Shaft.jpg [attachment=0]CTS PUSH PULL Guitar Potentiometer 500K Logarithmic Pot - Short Shaft.jpg thanks! |
|
| Author: | B. Howard [ Sat Apr 04, 2020 7:51 am ] |
| Post subject: | Re: please verify terminal pinouts- thanks! |
If I understand the question... The way you have them labeled C1 is the common, 1&2 are the switched contact positions with 2 being normal or "down" and 1 being optional circuit or "up". The other side is a seperate switch operating in the same mode. |
|
| Author: | the_doc735 [ Sun Apr 05, 2020 8:08 am ] |
| Post subject: | Re: please verify terminal pinouts- thanks! |
B. Howard wrote: If I understand the question... The way you have them labeled C1 is the common, 1&2 are the switched contact positions with 2 being normal or "down" and 1 being optional circuit or "up". The other side is a seperate switch operating in the same mode. I just wanted to know how does the nomenclature of the CTS push pull switch transfer to my unmarked traditional push pull switch? i.e. which terminal is 1, which terminal is C1, etc. etc. (have I marked them correctly or incorrectly)? many thanks! |
|
| Author: | Conor_Searl [ Mon Apr 06, 2020 12:00 pm ] |
| Post subject: | Re: please verify terminal pinouts- thanks! |
I think you've marked them correctly. |
|
| Author: | rbuddy [ Mon Apr 06, 2020 4:41 pm ] |
| Post subject: | Re: please verify terminal pinouts- thanks! |
https://www.stewmac.com/How-To/Online_Resources/Learn_About_Guitar_Pickups_and_Electronics_and_Wiring/Wiring_the_CTS_DPDT_Push-Pull_Pot.html |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|