| Official Luthiers Forum! https://luthiersforum.com/forum/ |
|
| Please help me with my Circuit diagram https://luthiersforum.com/forum/viewtopic.php?f=10123&t=55098 |
Page 1 of 1 |
| Author: | Jun [ Fri Jun 24, 2022 12:31 am ] |
| Post subject: | Please help me with my Circuit diagram |
Hi all, First time here, wanted to ask if I could get any advice on the electronic circuit below. I am planning to make a short scale bass with 3 pickups namely a mudbucker, P pickup and a humbucker. I am planning to have series, split & parallel configurations on the mudbucker and humbucker. Next have a push pull for each of the pickup for phase at their respective volume switch. Lastly, a tone and an output. Can i ask if the circuit make sense and if there will be any issues that i am not foreseeing? Sorry i am a novice at this, this is my 1st modification project. Thank you very much. Best Regards, Jun |
|
| Author: | dzsmith [ Fri Jun 24, 2022 8:23 am ] |
| Post subject: | Re: Please help me with my Circuit diagram |
I don’t see anything that looks incorrect. I suggest wiring one pickup, switch, and pot to the jack and test. Then wire the second pickup and test, then the third. If you have any issues, you will know which circuit it is. Best of luck and welcome to the forum! Dan |
|
| Author: | Jun [ Mon Jun 27, 2022 4:55 am ] |
| Post subject: | Re: Please help me with my Circuit diagram |
Hey Dan, Thank you very much for the advice and looking at my circuit diagram!! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|