Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 6:49 pm


All times are UTC - 5 hours





Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 76 posts ]  Go to page Previous  1, 2, 3, 4  Next
Author Message
 Post subject: Re: My challenge build
PostPosted: Sat Feb 18, 2012 4:48 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
I've started working on the tailpiece again. My old 4" angle grinder broke, so I had to get a new one.

First the wheel is shaped so that it will make a round groove, then grooves are cut on both sides of the billet, offset from one side to the other.

Before grinding:

Image


After:

Image


Image

To be continued...

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Sun Feb 19, 2012 4:47 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
Well, the binding is all glued on now. I'm not real happy with the fit of the top bindings though. Before I do another archtop, I need to build a binding router jig thing...

I painted the channels with shellac first:

Image


The bindings. They came out of the bender a little lumpy in some spots, so I had to touch them up on the iron:

Image

Image

Image

Image


I also worked on the fingerboard a little. I tapered it and added side position markers:

Image

Image


I'll finish forging the tailpiece tomorrow, and will probably be able to string it up, "in the white", shortly thereafter.

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Sun Feb 26, 2012 9:28 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
I actually haven't done anything on this project since last weekend, but here's some more pics from then.

The binding scraped on the top and back. Have to do the sides yet:

Image

Image


The inserts, inserted:

Image


The neck joint flossed:

Image


The wedge glued to the neck:

Image


The fingerboard radiused:

Image

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Sun Feb 26, 2012 9:32 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
The tailpiece. Sorry, I missed some intermediate steps. Basically, I drilled the holes, then used a torch to soften the area I wanted it to bend, and bent it. I think I may be scrapping this one because it's not wide enough. We'll see.

I used a small cut off wheel in my Foredom and needle files to make the string slots.

Image

Image

Image

Image

Image

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Sun Feb 26, 2012 9:43 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
I really like this build Phillip . love the wood combo and the steel work . I really look forward to seeing the finished product and hearing her played . great work [:Y:]

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Sun Apr 08, 2012 6:06 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jan 22, 2010 9:59 pm
Posts: 3552
First name: Dennis
Last Name: Kincheloe
City: Kansas City
State: MO
Country: USA
Focus: Build
Status: Amateur
So how's this baby coming along? Waiting for finish to cure, or do you still have it strung up in the white? And what are your thoughts on eastern red cedar as a top wood? There's a guy over on delcamp asking about it, says there's a guy somewhere in Missouri with a bunch and could cut guitar tops if there's interest.

Excellent work, by the way. I think this is my favorite build in the challenge so far. Love the color scheme, shape, F holes, everything. I've been wanting to try an arched top with flat back like that, and wondered why nobody ever did it. Arched back makes sense for soundpost instruments, but flat seems like it would work better for guitar style instruments... plus it saves a bunch of wood and painful hardwood carving. Carving the top is fun though :)

Definite points for forging your own steel tailpiece [:Y:] Looks great. Not a fan of the hex bolt though. Stick a wood pin in that thing!

Can't wait to hear sound clips.


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Sun Apr 08, 2012 7:35 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
Really cool build. Nice job carving the plates.

I replaced some plastic handles on some chisels with curly maple and used copper pipe for ferrels, your hand made ones look really nice.

I've been into forged knives for a long time, I have a couple of Jerry Fisk knives, should have three one got stolen.


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Sun May 13, 2012 10:25 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
DennisK wrote:
So how's this baby coming along? Waiting for finish to cure, or do you still have it strung up in the white? And what are your thoughts on eastern red cedar as a top wood? There's a guy over on delcamp asking about it, says there's a guy somewhere in Missouri with a bunch and could cut guitar tops if there's interest.

Excellent work, by the way. I think this is my favorite build in the challenge so far. Love the color scheme, shape, F holes, everything. I've been wanting to try an arched top with flat back like that, and wondered why nobody ever did it. Arched back makes sense for soundpost instruments, but flat seems like it would work better for guitar style instruments... plus it saves a bunch of wood and painful hardwood carving. Carving the top is fun though :)

Definite points for forging your own steel tailpiece [:Y:] Looks great. Not a fan of the hex bolt though. Stick a wood pin in that thing!

Can't wait to hear sound clips.


It's coming along pretty well. I hadn't really done anything on it for a couple months, then realized the deadline is quickly approaching, and I'd better get moving. duh So, a few weeks ago I shaped the neck, and this week finished sanding and started spraying.

I did have it strung up in the white, and it sounded pretty good. I think the eastern red cedar is fine as a top wood, but you won't see it used much, since it's so hard to find pieces big enough without knots.

Don't worry, I'll be making an osage endpin. :)


Clinchriver wrote:
Really cool build. Nice job carving the plates.

I replaced some plastic handles on some chisels with curly maple and used copper pipe for ferrels, your hand made ones look really nice.

I've been into forged knives for a long time, I have a couple of Jerry Fisk knives, should have three one got stolen.


Sorry to hear about your Fisk getting stolen. What models do you have?


Ok, here's the first round of the semi-final pics:

The neck before shaping:

Image


I use a belt grinder called the KMG (knife makers grinder) from Beaumont Metal Works. A wonderful tool. I'd be lost without it.

Here it's set up with the small wheel attachment:

Image


After shaping the way I want, I use a different attachment, with a slack 240 grit belt to remove the 40 grit scratches:

Image


All smoothed out:

Image

I'm finishing this neck with Tru-oil. Here it is with one coat on:

Image

Image

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Sun May 13, 2012 10:31 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
I decided I didn't like the color of the top, so I'm painting it gray:

Image


Just kidding! I'm actually using the paint to help me find any imperfections on the top:

Image

Image


I'm not pore filling this instrument. I'm doing a quick and dirty finish. First, a couple coats of shellac, then sand it smooth:

Image

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Sun May 13, 2012 10:35 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
Then lacquer. I'm using Watco brushing lacquer, because I have it, and want to use it up. Since I'm not pore filling, it would be pointless to sand this all the way up through the grits and buff, so I'm just going to spray a dozen coats, level, then spray one more very thin coat.

Image

Image

Image

Image

Image

At this point, I need to let the lacquer harden a couple days before I level it. This brushing lacquer takes awhile to harden...

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Sun May 13, 2012 11:26 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
Now, the tailpiece.

I heat treated it because hardened and tempered damascus gives much better contrast than soft (annealed).

Before etching:

Image


After etching:

Image

After buffing:

Image


I repeated the etching/buff process a couple more times, etched it one last time, and left it in the neutralizing bath for several weeks. Then I lightly sanded it with very fine paper to bring a shine to the bright layers, while leaving the others dark. Then I sprayed several coats of lacquer to keep prevent rust. As soon as I find the tailpiece, I'll take some pics of it...

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Sun May 13, 2012 12:18 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
I found the tailpiece. Miracles do happen.

Image

Image

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Sun May 13, 2012 1:34 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
That damascus tailpiece is cheating........ thats awesome. Would you be interested in doing a couple of mandolin tailpieces?


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Mon May 14, 2012 9:20 am 
Offline
Koa
Koa

Joined: Sat Apr 19, 2008 10:08 pm
Posts: 1958
Location: Missouri
First name: Patrick
Last Name: Hanna
State: Missouri
Country: USA
It's a very cool little instrument, Phillip. I've enjoyed following along with it. I like your choices throughout. At first, I didn't think I'd like the bindings, but they work very well. I'm especially impressed with the way you brought out the pattern in the damascus steel. That's beautiful.
Patrick


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Sun May 20, 2012 6:46 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Sep 29, 2011 2:54 pm
Posts: 115
First name: Andrew
City: Ottawa
State: ON
Focus: Build
Status: Amateur
That tailpiece is awesome. So after you cut grooves into it, did you just hammer it flat, or was there more to the process?


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Wed May 23, 2012 11:30 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
Clinchriver wrote:
That damascus tailpiece is cheating........ thats awesome. Would you be interested in doing a couple of mandolin tailpieces?


Hmm, maybe. The design needs some tweaking first.

muskr@ wrote:
That tailpiece is awesome. So after you cut grooves into it, did you just hammer it flat, or was there more to the process?


Yes, after grinding the grooves were cut, then I hammered it flat, then forged it down to the final as-forged thickness, then ground it down to about 1/16" thick.


Ok, here are the final in-progress pics:

Making the tail pin:

Image


Image


Image


Image


Image


Image


Next post, finished pics.

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Wed May 23, 2012 11:33 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
Assembly was just a matter of bolting everything together. And adjusting the bridge height. I'm not sure I'll leave the bridge the way it is. I might "skeletonize" it like a violin bridge.

Image

Image

Image

Image

Image

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Wed May 23, 2012 11:35 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
More pics:

Image

Image

Image

Image

Image

Image


Now I just have to find someone who can play something I can record and post...

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Tue May 29, 2012 11:07 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
I just recorded my demo video:



http://www.youtube.com/watch?v=9AwZVjgl ... e=youtu.be

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: My challenge build
PostPosted: Wed May 30, 2012 12:10 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
Outstanding!! Sounds great and you get bonus points for making the Damascus tail piece!!

_________________
http://www.CostaGuitars.com
PMoMC


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Wed May 30, 2012 4:07 am 
Offline
Koa
Koa
User avatar

Joined: Mon Sep 05, 2011 10:45 pm
Posts: 1470
First name: Trevor
Last Name: Gore
City: Sydney
Country: Australia
Focus: Build
Status: Professional
Nice, Phillip. Scarborough Fair rules!

_________________
Trevor Gore, Luthier. Australian hand made acoustic guitars, classical guitars; custom guitar design and build; guitar design instruction.

http://www.goreguitars.com.au


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Wed May 30, 2012 8:55 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat May 22, 2010 10:32 am
Posts: 2616
First name: alan
Last Name: stassforth
City: Santa Rosa
State: ca
Zip/Postal Code: 95404
Country: usa
Focus: Build
Status: Amateur
Nice!!!!!
duh [clap] [clap] [clap]


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Wed May 30, 2012 9:19 am 
Offline
Contributing Member
Contributing Member

Joined: Fri May 09, 2008 2:25 pm
Posts: 1954
First name: George
City: Seattle
State: WA
Country: USA
Focus: Build
Status: Amateur
That's awesome, Phillip! And cool documentation of your process as well.

_________________
George :-)


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Wed May 30, 2012 2:13 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Sep 29, 2011 2:54 pm
Posts: 115
First name: Andrew
City: Ottawa
State: ON
Focus: Build
Status: Amateur
I love the sound. It's sort of like a mando but smoother.


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Thu May 31, 2012 8:49 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Mar 04, 2008 11:55 am
Posts: 566
First name: Bob
Last Name: Shanklin
City: Windsor
State: ON
Country: Canada
Great work, and documentation, Phillip.


Top
 Profile  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 76 posts ]  Go to page Previous  1, 2, 3, 4  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com