Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Mar 19, 2024 1:08 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 122 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next
Author Message
PostPosted: Sat Nov 17, 2012 9:36 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Jan 13, 2010 12:46 am
Posts: 1247
First name: Beth
Last Name: Mayer
City: Tucson
State: AZ
Country: United States
Focus: Build
Status: Amateur
Very classy and mellow-looking. Do you wipe the Tru-Oil on and then right off again? What kind of pattern do you use in applying (with grain, against, circular?)?
Can't wait to see it finished.


Top
 Profile  
 
PostPosted: Sat Nov 17, 2012 9:45 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Apr 03, 2012 12:47 pm
Posts: 298
First name: Jay
Last Name: Swann
City: Austin
State: TX
Zip/Postal Code: 78739
Country: USA
Focus: Build
Status: Amateur
Beth,
What I've found to work best for me is to apply the Tru-Oil with the grain, using a big cotton ball. I like to put it on kind of medium-thin, and do not wipe it afterwards. I will usually scuff it with micromesh between coats, and level a little with 600 grit every three coats or so. It seems to work for me. I've tried the coffee filter method, the paper towel method, the finger method, and this works the best for me.


Top
 Profile  
 
PostPosted: Mon Nov 26, 2012 11:22 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Apr 03, 2012 12:47 pm
Posts: 298
First name: Jay
Last Name: Swann
City: Austin
State: TX
Zip/Postal Code: 78739
Country: USA
Focus: Build
Status: Amateur
Can't let the thread fall too far down--I lose motivation. Pics here are of the finish starting to come up on the body, and the neck roughed out. The neck is almost complete now, I actually am just doing some touchup sanding on the neck to make sure there are no flat spots. I should drill for tuners and rough the headstock out tonight. I'll then re-flatten the fretboard prior to fretting, and do the final flossing of the neck joint. I'm getting close!!
Attachment:
another finish.jpg
Attachment:
neck on.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Mon Nov 26, 2012 5:25 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Jan 13, 2010 12:46 am
Posts: 1247
First name: Beth
Last Name: Mayer
City: Tucson
State: AZ
Country: United States
Focus: Build
Status: Amateur
You're at my least favorite stage...finishing and setup can take as long as the building did! Looking really pretty!


Top
 Profile  
 
PostPosted: Mon Nov 26, 2012 5:43 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jun 10, 2012 10:04 am
Posts: 773
First name: Peter
Last Name: Fenske
City: Leeds
State: Yorkshire
Country: Uk
Focus: Build
Status: Amateur
Beth Mayer wrote:
finishing and setup can take as long as the building did!


Now why did you have to say that?? duh eek

_________________
"I am always doing that which I cannot do, in order that I may learn how to do it."
Pablo Picasso

https://www.facebook.com/FenskeGuitars


Top
 Profile  
 
PostPosted: Mon Nov 26, 2012 8:40 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3290
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
Beautiful! What are the dimensions of that box? What is the scale length?

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
PostPosted: Mon Nov 26, 2012 9:31 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Apr 03, 2012 12:47 pm
Posts: 298
First name: Jay
Last Name: Swann
City: Austin
State: TX
Zip/Postal Code: 78739
Country: USA
Focus: Build
Status: Amateur
Bryan, please forgive the crappy picture. The guitar is modeled off the Bruno/Martin size 2 plan drawn by Scott Antes in 1974--I did mod it very slightly. I had a friend who played a Takamine Bruno commemorative in the early 90's and I thought it was the sexiest guitar I had ever seen--I still believe it is. As for dimensions, the upper bout is 8.5", waist is 7", and the lower bout is 12" wide. The scale is 24.5" and I repositioned the bridge in this photo to show it's actual location relative to scale. I hope it finishes out as nice as it has started. It will definitely be a conversation piece. --Jay


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Mon Nov 26, 2012 9:53 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Jan 13, 2010 12:46 am
Posts: 1247
First name: Beth
Last Name: Mayer
City: Tucson
State: AZ
Country: United States
Focus: Build
Status: Amateur
I really love that bearclaw top. Are you putting a pyramid bridge on?


Top
 Profile  
 
PostPosted: Mon Nov 26, 2012 10:03 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Apr 03, 2012 12:47 pm
Posts: 298
First name: Jay
Last Name: Swann
City: Austin
State: TX
Zip/Postal Code: 78739
Country: USA
Focus: Build
Status: Amateur
Yes, pyramid bridge done in mesquite.... :mrgreen:


Top
 Profile  
 
PostPosted: Mon Nov 26, 2012 10:09 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7233
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
That is a sweet looking little guitar. Just looking at it makes me want to build one for myself.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Mon Nov 26, 2012 10:26 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Jan 13, 2010 12:46 am
Posts: 1247
First name: Beth
Last Name: Mayer
City: Tucson
State: AZ
Country: United States
Focus: Build
Status: Amateur
Jaybird840 wrote:
Yes, pyramid bridge done in mesquite.... :mrgreen:


Sa....weet!!!! bliss


Top
 Profile  
 
PostPosted: Tue Nov 27, 2012 9:51 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
That's very nice.

_________________
http://www.CostaGuitars.com
PMoMC


Top
 Profile  
 
PostPosted: Wed Nov 28, 2012 7:11 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Apr 03, 2012 12:47 pm
Posts: 298
First name: Jay
Last Name: Swann
City: Austin
State: TX
Zip/Postal Code: 78739
Country: USA
Focus: Build
Status: Amateur
A little more work last night and this morning. No jig for drilling the tuner holes, so grab the starrett square and line her up....
Attachment:
drilling tuner holes.JPG


And after drilling the pilot holes for the slots.....

Attachment:
cutting tuner slots.JPG


It's beginning to resemble a guitar!

Attachment:
getting there.JPG


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Wed Nov 28, 2012 8:21 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7233
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
I really like it whey they start looking like a guitar [:Y:]

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Wed Nov 28, 2012 8:37 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
Looking gooood!

_________________
http://www.CostaGuitars.com
PMoMC


Top
 Profile  
 
PostPosted: Wed Nov 28, 2012 9:22 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Apr 03, 2012 12:47 pm
Posts: 298
First name: Jay
Last Name: Swann
City: Austin
State: TX
Zip/Postal Code: 78739
Country: USA
Focus: Build
Status: Amateur
Thanks for the encouragement, guys (and gal!). I feel like I'm in the home stretch now...


Top
 Profile  
 
PostPosted: Wed Nov 28, 2012 9:39 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Love the shop smith BTW ... great tools for a limited space builder !

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
PostPosted: Sun Dec 02, 2012 10:05 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Apr 03, 2012 12:47 pm
Posts: 298
First name: Jay
Last Name: Swann
City: Austin
State: TX
Zip/Postal Code: 78739
Country: USA
Focus: Build
Status: Amateur
Inch by inch.... The neck is now set and flossed (finally!!!) I HATE neck setting (because it is so critical, I guess), but I have the neck set where I want it now. The headstock is done, string ramps filed (98% anyways), neck profile and heel are 97% done (still hunting a tiny flat spot). I've begun fretting as well--no fancy equipment there either, I bent the wire at a local repair guys shop, and cut the tangs off with a dremel and cutoff wheel, and then file smooth. I tap them in with an engraver's chasing hammer (I don't have a dead-blow hammer yet, and it worked out OK on my first build). Now that the neck is set, and ready for final install, I can see the end in sight. I may be strung up by the end of next weekend, which would be nice to have a few weeks of settle in and filming before the end!


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Tue Dec 11, 2012 7:14 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Apr 03, 2012 12:47 pm
Posts: 298
First name: Jay
Last Name: Swann
City: Austin
State: TX
Zip/Postal Code: 78739
Country: USA
Focus: Build
Status: Amateur
Almost home. Just doing some final finishing work on both the body and neck, and I'll be ready for final assembly and setup. I got the mesquite pyramid bridges back from Andy Birko who does absolutely FABULOUS CNC work. I swapped him some wood for a couple of pyramid bridges, and this is what came back... Thanks Andy!!

Image


Top
 Profile  
 
PostPosted: Tue Dec 11, 2012 8:05 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7233
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
That bridge looks really good on there.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Tue Dec 11, 2012 8:48 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
Yup. That sure is nice!

_________________
http://www.CostaGuitars.com
PMoMC


Top
 Profile  
 
PostPosted: Tue Dec 11, 2012 9:08 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3290
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
This is really starting to look nice. You are making me want to head town to Texas and get some mesquite.

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
PostPosted: Tue Dec 11, 2012 10:31 am 
Offline
Koa
Koa
User avatar

Joined: Thu Sep 24, 2009 9:50 am
Posts: 941
Location: Ellicott City, Md - USA
First name: John
Last Name: A
Focus: Build
Status: Amateur
looks like it's going to be a beauty !! I really like your pictures too.

_________________
It's this new idea from recent decades that everyone gets a participation award. - MUX


Top
 Profile  
 
PostPosted: Thu Dec 13, 2012 6:30 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Apr 03, 2012 12:47 pm
Posts: 298
First name: Jay
Last Name: Swann
City: Austin
State: TX
Zip/Postal Code: 78739
Country: USA
Focus: Build
Status: Amateur
The Mesquite-O will be sporting Grover Sta-tites @ $30 courtesy of eBay.... With free wood, you don't even have to cheap out on the tuners!!

Image


Top
 Profile  
 
PostPosted: Thu Dec 13, 2012 12:40 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7233
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
I got two sets of those tuners for flat pegheads - a bargain for sure.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 122 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com