Official Luthiers Forum!
https://luthiersforum.com/forum/

Jason Moe's Build
https://luthiersforum.com/forum/viewtopic.php?f=10133&t=37277
Page 2 of 4

Author:  meddlingfool [ Fri Nov 16, 2012 12:07 am ]
Post subject:  Re: Jason Moe's Build

Been a week, any progress?

Author:  JasonMoe [ Fri Nov 16, 2012 1:01 am ]
Post subject:  Re: Jason Moe's Build

No a whole heck of alot. I roughed out my neck on the bandsaw. It's getting really busy at my day job at the Post Office. I hope to get the neck close to shape this weekend, and maybe if your lucky bend the sides. Image

Author:  JasonMoe [ Sat Nov 24, 2012 11:06 pm ]
Post subject:  Re: Jason Moe's Build

So today I cut out the tuner holes. ImageI also started roughing out the neck. I like to use a curved rasp/file and chisels. ImageImage

Author:  Tony_in_NYC [ Sun Nov 25, 2012 8:59 am ]
Post subject:  Jason Moe's Build

Looking good!


Posted using two tin cans and some string.

Author:  JasonMoe [ Thu Nov 29, 2012 11:08 pm ]
Post subject:  Re: Jason Moe's Build

So I got the neck all smoothed out and shaped the way I want today. I used 80 grit Green paper 3M sandblaster sandpaper to get it roughed out. I took most of the meat off between the ends with a tabletop belt sander. I finished with the 320 Purple 3M sandblaster sandpaper. The paper works so well compared to other tan/brown papers. I should get a coat of finish on tomarrow after I use the neck to line up my neck block later on today. Image

Author:  JasonMoe [ Fri Nov 30, 2012 1:04 am ]
Post subject:  Re: Jason Moe's Build

I drilled the holes for the bolts in the neck block. I changed the plans and used my neck block style. A little smaller than I typically use, to fit in the smaller space. Since I fitted the neck to the block already, and the neck is done, I can use the center of the neck fitted to the neckblock to get a straight neck to body joint. My workboard(Solara) have a straight line going all the way across. I line up the top using the center glue joint, clamp it. Mark the center of the neck on both ends and the block and glue it in. I use an angled caul since the block has a slight radious to fit the back later. Glued in the tail block too. Ready for side-bending this weekend. I can't wait to try out the ash for the 1st time. I hope it bends nice. There's going to be a huge surplus of ash in the next decade due to the Emerld Ash Borer thats beginning to kill the trees in the midwest. I hope to salvage wood for future projects. Image

Author:  Tony_in_NYC [ Mon Dec 10, 2012 11:13 am ]
Post subject:  Re: Jason Moe's Build

I'm no expert on measurements, but is your X-brace about 2 inches tall at the joint? Looks a touch bulky to me, but that could be because you used a potato to take the picture.


Jeez man...sorry for the double zing post. I was on a roll.

Author:  JasonMoe [ Mon Dec 10, 2012 5:11 pm ]
Post subject:  Re: Jason Moe's Build

I believe it was 15/16.

Author:  Tony_in_NYC [ Mon Dec 10, 2012 5:53 pm ]
Post subject:  Re: Jason Moe's Build

Looks like what I usually refer to as 6 inches. laughing6-hehe

Author:  JasonMoe [ Mon Dec 10, 2012 7:55 pm ]
Post subject:  Re: Jason Moe's Build

Tony_in_NYC wrote:
Looks like what I usually refer to as 6 inches. laughing6-hehe

Maybe in your dreams. :lol:

Author:  Beth Mayer [ Mon Dec 10, 2012 8:52 pm ]
Post subject:  Re: Jason Moe's Build

Men and their difficulty with measurements! laughing6-hehe
Looking good, Jason.

Author:  JasonMoe [ Mon Dec 10, 2012 10:56 pm ]
Post subject:  Re: Jason Moe's Build

Ha Ha Thanks Beth!

Author:  Tony_in_NYC [ Mon Dec 10, 2012 11:30 pm ]
Post subject:  Re: Jason Moe's Build

Beth Mayer wrote:
Men and their difficulty with measurements! laughing6-hehe
Looking good, Jason.



Yes Beth, thank you for helping Jason get the joke! Sheesh! [headinwall]

Author:  Bryan Bear [ Mon Dec 10, 2012 11:32 pm ]
Post subject:  Re: Jason Moe's Build

Tony_in_NYC wrote:
Beth Mayer wrote:
Men and their difficulty with measurements! laughing6-hehe
Looking good, Jason.



Yes Beth, thank you for helping Jason get the joke! Sheesh! [headinwall]

Sadly, it is Mrs. costa who gets the joke.

Author:  JasonMoe [ Tue Dec 11, 2012 1:23 am ]
Post subject:  Re: Jason Moe's Build

Oh I got it, I was meaning that Tony only dreams of having 6 inches of wood. I wonder if Stew-Mac sells microscopes and tweezers.

Author:  Tony_in_NYC [ Tue Dec 11, 2012 9:44 am ]
Post subject:  Re: Jason Moe's Build

There is a Tweezer and Microscope Emporium in my neighborhood. I'm all set. There is also a Spatula City, here if you buy 12 spatulas, you get the 13th for free. But that is for another thread.

Author:  Bryan Bear [ Tue Dec 11, 2012 10:26 am ]
Post subject:  Re: Jason Moe's Build

Spatula City is one of my favorite stores! I love their commercials. They always seem to come on during shows like Connan the Librarian and Wheel of Fish.

Author:  Tony_in_NYC [ Tue Dec 11, 2012 10:44 am ]
Post subject:  Re: Jason Moe's Build

Bryan Bear wrote:
Spatula City is one of my favorite stores! I love their commercials. They always seem to come on during shows like Connan the Librarian and Wheel of Fish.


Spatula City knows their target audience so they only pick the best advertising slots.

Author:  WudWerkr [ Tue Dec 11, 2012 11:08 am ]
Post subject:  Re: Jason Moe's Build

Tony_in_NYC wrote:
Bryan Bear wrote:
Spatula City is one of my favorite stores! I love their commercials. They always seem to come on during shows like Connan the Librarian and Wheel of Fish.


Spatula City knows their target audience so they only pick the best advertising slots.



Sorry guys , Im more of a " laddle land " fella myself . pfft

Author:  JasonMoe [ Fri Dec 28, 2012 12:15 am ]
Post subject:  Re: Jason Moe's Build

I think i'm going to be out. I'm going to come up short. I really want this guitar to come out nice, so I don't want to throw it together at the last minute. I'm going to keep my thread going until i'm done though. I doubt I would have won anyway. So many nice guitars entered that are way better than mine. Nice work everyone.

Author:  SteveSmith [ Fri Dec 28, 2012 12:21 am ]
Post subject:  Re: Jason Moe's Build

JasonMoe wrote:
I think i'm going to be out. I'm going to come up short. I really want this guitar to come out nice, so I don't want to throw it together at the last minute. I'm going to keep my thread going until i'm done though. I doubt I would have won anyway. So many nice guitars entered that are way better than mine. Nice work everyone.


Jason, sorry to hear that but understand not wanting to throw it together. Too much work involved. Make sure you post photos when you get it done.

Author:  JasonMoe [ Thu Jan 03, 2013 5:49 pm ]
Post subject:  Re: Jason Moe's Build

So I didn't finish the guitar on time. But I am still going to post it here. So I got the sides bent. Pre-shaped to the back slope profile, and glued to the head/tail blocks. I will glue the linings in when the glue is dry. Then do the final shaping of the sides. I need to think of something for the end graft. Maybe some curly maple. Image

ImageImageImageImage

Author:  JasonMoe [ Sun Jan 06, 2013 8:54 pm ]
Post subject:  Re: Jason Moe's Build

I glued in the linings on the top last night. This afternoon, I profiled the sides where they slope nice. Then glued on the linings for the back. I leave them a little high, then sand them down at a slight angle to match the back radius. Total shop time at this point. 14.5 hours. ImageImageImageImageImage

Author:  Tony_in_NYC [ Mon Jan 07, 2013 9:03 am ]
Post subject:  Re: Jason Moe's Build

I'm really glad you are clocking your shop time. I have only a rough guess of how long it takes me to build a guitar. And it is extremely rough.

Author:  JasonMoe [ Thu Jan 31, 2013 1:10 am ]
Post subject:  Re: Jason Moe's Build

Still going with this guitar. I split up some lutz bracing, braced the back, and glued the back on. ImageImageImage Total build time so far. 17.75 hours.

Page 2 of 4 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/