Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Mar 19, 2024 6:09 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 102 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next
Author Message
PostPosted: Tue Oct 16, 2012 12:38 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur
I've gotten all the braces roughly shaped with the correct radius, and the back braces have been glued on.
Attachment:
IMGP3797.JPG

I'll be going to Texas the end of this week to visit my folks, getting this finished on time may be difficult.
At least I don't have to fix the top! laughing6-hehe
But then, I haven't cut the binding/purfling channel yet either. bliss
Attachment:
IMGP3813.JPG


You do not have the required permissions to view the files attached to this post.

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon


Top
 Profile  
 
PostPosted: Tue Oct 16, 2012 3:55 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3290
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
You brace the top prior to cutting out the soundhole?

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
 Post subject: Rodger's challenge entry
PostPosted: Tue Oct 16, 2012 9:17 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
No Bryan, his sound hole uses Stealth Cloaking Technology that only makes it appear to be a solid piece of wood! When you plug in, the stealth turns off and you can see the sound hole.

Or....SHUT UP! You're gonna tip him off to a major flaw that will kill his chances of winning!


Posted from my Mustache using Tapatalk

_________________
http://www.CostaGuitars.com
PMoMC


Top
 Profile  
 
PostPosted: Tue Oct 16, 2012 10:11 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3290
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
I was just hoping to see a new trick, I may need to use it someday. Now I see what is going on. You are going to sell him some of your fancy kerfs. Then he can rub them on using a round stencil.

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
PostPosted: Wed Oct 17, 2012 4:14 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur
Yes, I brace the top before I cut out the soundhole. The top's not braced yet, they're just lying in about the right places, but I will glue on the braces before I cut out the sound hole. For that matter, I'll close the box before I cut out the soundhole. I've got the circle drawn on both sides so I know where it will be while I'm glueing on the braces. I cut out the sound hole freehand with a hobby knife, so it's just as easy after everything is together. I usually do the final sanding after the box is together but before cutting out the soundhole. I think it makes it easier to sand the top, but many of my techniques leave something to be desired. :D
I won't be using any CostaCerfs on this one, I'm sticking with the tone of my laminated unkerfed linings. (Sorry about the copyright infringement, Tony)

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon


Top
 Profile  
 
PostPosted: Thu Oct 18, 2012 8:29 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Apr 03, 2012 12:47 pm
Posts: 298
First name: Jay
Last Name: Swann
City: Austin
State: TX
Zip/Postal Code: 78739
Country: USA
Focus: Build
Status: Amateur
Where in the Republic will you be visiting???


Top
 Profile  
 
PostPosted: Thu Oct 18, 2012 12:24 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Jan 13, 2010 12:46 am
Posts: 1247
First name: Beth
Last Name: Mayer
City: Tucson
State: AZ
Country: United States
Focus: Build
Status: Amateur
Hey Rodger,

Looks really nice. Love that bloodwood/maple combo making up the back.
Can you tell me more about your FB radiusing carrier? What angle is on that and for what radius? How did you cut the angle out, or did you just make a wedge and glue a stop-strip onto the length to hold the FB?
I like the RW top.


Top
 Profile  
 
PostPosted: Thu Oct 18, 2012 2:20 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
Rodger Knox wrote:
I won't be using any CostaCerfs on this one, I'm sticking with the tone of my laminated unkerfed linings. (Sorry about the copyright infringement, Tony)


You will be hearing from my people. laughing6-hehe

_________________
http://www.CostaGuitars.com
PMoMC


Top
 Profile  
 
PostPosted: Tue Oct 23, 2012 12:01 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur
I'm back from the Republic, although I'd rather still be there. I was in Conroe, just north of Houston, visiting my folks. Had a nice visit.
I'm going to start bracing the top tonight.
Tony, I'll have my people ignore your people. beehive

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon


Top
 Profile  
 
PostPosted: Tue Oct 23, 2012 2:21 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
Rodger Knox wrote:
Tony, I'll have my people ignore your people. beehive


Since you are not Mrs. Costa, that is unacceptable. Please have your people either
1) blow off my people
or
2) say they will call and then never call or call many hours late. Make another empty promise to meet, only to blow me off again.
I'm into that. Don't ask.

_________________
http://www.CostaGuitars.com
PMoMC


Top
 Profile  
 
PostPosted: Tue Oct 23, 2012 2:46 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur
You would have loved my return flight. Initially, they said we'd be delayed an hour for maintainence. At boarding time they said another half hour. Then another half hour. Then maybe 3 more hours for another plane to arrive, no wait, we've fixed the plane, it's ready. Oh, yeah, it's at the hanger and it'll be half an hour to tow it over. Then....
I was speaking of option 2) when I said I'd have my people ignore your people. My people aren't as rude as I am, so they'd tell you they were going to do something. duh

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon


Top
 Profile  
 
PostPosted: Thu Oct 25, 2012 12:46 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur
Beth Mayer wrote:
Hey Rodger,

Looks really nice. Love that bloodwood/maple combo making up the back.
Can you tell me more about your FB radiusing carrier? What angle is on that and for what radius? How did you cut the angle out, or did you just make a wedge and glue a stop-strip onto the length to hold the FB?
I like the RW top.


Thanks, I'm quite anxious to see all this under finish. It should look spectacular, unless I screw it up!
The FB radiusing carrier is straight out of Bob Benedetto's book. The angle is about 5°, and it's for a 12" radius. I cut the carrier board against a fence on the bandsaw with the table tipped 5° and glued on a 1/4" x 1/2" scrap as a stop-strip. It saves a lot of work by taking off most of what needs to be removed at the edges, which is where the most needs to be removed. I'll be making another soon, I've decided 12" is too tight and I'm going to 16" for the radius. The angle for that is 3.5°.

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon


Top
 Profile  
 
PostPosted: Wed Oct 31, 2012 12:20 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur
From where I am, Sandy was just another storm. There have been at least two worse storms this year, but they didn't get a week of media hype. I'm sure other areas were more severely impacted, but we didn't even lose power. Since I couldn't go into work for a couple of days, (my office is right on the harbor, there was some flooding on Monday and Tuesday) I got a little more done.
I finished fitting the back to the sides.
Attachment:
IMGP3848.JPG

I got the top braced.
Attachment:
IMGP3852.JPG

Attachment:
IMGP3856.JPG


You do not have the required permissions to view the files attached to this post.

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon


Top
 Profile  
 
PostPosted: Wed Oct 31, 2012 12:27 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur
I got the top glued to the rims.
Attachment:
IMGP3860.JPG

I fitted the neck joint.
Attachment:
IMGP3867.JPG

Attachment:
IMGP3868.JPG

And closed the box!
Attachment:
IMGP3871.JPG


You do not have the required permissions to view the files attached to this post.

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon


Top
 Profile  
 
PostPosted: Wed Oct 31, 2012 12:33 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur
Here's one last shot, the fretboard and headplate are not yet attached, just laid out to see how this is going to look.
Attachment:
IMGP3865.JPG

I'm hoping the binding and purfling will help, I'm not quite loving the way this top looks yet.


You do not have the required permissions to view the files attached to this post.

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon


Top
 Profile  
 
PostPosted: Wed Oct 31, 2012 3:47 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3290
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
I’m trying to think of a word to describe the woods used here, I keep coming back to “delicious.”

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
PostPosted: Wed Oct 31, 2012 9:24 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7233
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
I like the top but I think it would look better with a soundhole. beehive

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Tue Nov 06, 2012 10:14 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
Looking good. I missed these pics somehow.

_________________
http://www.CostaGuitars.com
PMoMC


Top
 Profile  
 
PostPosted: Wed Nov 07, 2012 12:49 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur
I was hoping that someone would comment on how crudely my braces were carved, since I don't have a Brace Carving Chisel! laughing6-hehe
I also need to do something different posting photos, mine seem small and not all that sharp.

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon


Top
 Profile  
 
PostPosted: Wed Nov 14, 2012 11:26 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur
I haven't done much, I've been putting off cutting the binding/purfling channel.
I did get all the frets cut and radiused.
Attachment:
IMGP3873.JPG

And here's my high-tech equipment for precisely pressing frets.
Attachment:
IMGP3885.JPG

Naturally, installing the frets induced a back bow of 1/4" or so.
Attachment:
IMGP3890.JPG

So here it's clamped in the "Proulx bend".
Attachment:
IMGP3893.JPG


You do not have the required permissions to view the files attached to this post.

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon


Top
 Profile  
 
PostPosted: Fri Nov 23, 2012 1:27 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6232
Location: Virginia
What is not to like about that top? I think it looks great and it will look even better under finish. I would not worry about that back bow it's normal when fretting off the neck.


Top
 Profile  
 
PostPosted: Mon Nov 26, 2012 2:04 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur
Well, it's not really the top, it's the rosette that looks less than spectacular. I'm hoping the white binding and cutting out the sound hole will improve the appearance.
I'd be worried if it DIDN"T backbow! A couple of days in the "Proulx bend" and it's as flat as my jointer table.

I've cut the binding/purfling channels, and I didn't screw anything up! bliss
I've started preping the surfaces for final finish, I need to get the binding/purfling on this week to have a good chance of completion before the deadline.

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon


Top
 Profile  
 
PostPosted: Tue Nov 27, 2012 12:55 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur
Here's a few more photos...
The fingerboard after the Proulx bend, as flat as it was before fretting.
Attachment:
IMGP3902.JPG

I probably should have come up with some clever jig for this, but I just went ahead and drilled the holes freehand!
Attachment:
IMGP3904.JPG

Here's the birdseye headplate with the tuners installed.
Attachment:
IMGP3909.JPG

And the back of the headstock. I nearly went too far south with the tuners.
Attachment:
IMGP3910.JPG


You do not have the required permissions to view the files attached to this post.

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon


Top
 Profile  
 
PostPosted: Tue Nov 27, 2012 1:11 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7233
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Nice work! I almost made a tuner mistake on the headstock by leaving the curved area for the volute too close to the tuners so they wouldn't lay flat. Fortunately I did a test fit to check to see if the headstock thickness was correct and caught the other problem - whew.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Tue Nov 27, 2012 2:15 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur
I shifted the tuners a bit to make room for my "Logo". laughing6-hehe
I had a few scraps of shell left over from another project, so I cut this out.
Attachment:
IMGP3929.JPG

Scribed around the shell...
Attachment:
IMGP3932.JPG

And inlayed it!
Attachment:
IMGP3935.JPG


You do not have the required permissions to view the files attached to this post.

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 102 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com