Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Mar 19, 2024 6:44 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Spruce from pine?
PostPosted: Fri Jul 12, 2013 1:40 pm 
Offline
Walnut
Walnut

Joined: Fri Feb 22, 2013 8:31 am
Posts: 20
First name: Dean
Last Name: Heard
City: Bournemouth
State: uk
Zip/Postal Code: BH1 4ED
Country: England
Focus: Build
Status: Amateur
how to tell the Difference between spruce and pine timber


Top
 Profile  
 
 Post subject: Re: Spruce from pine?
PostPosted: Fri Jul 12, 2013 1:50 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 21, 2008 8:57 pm
Posts: 1982
Location: 8.33±0.35 kpc from Galactic center, 20 light-years above the equatorial in the Sol System
First name: duh
Last Name: Padma
City: Professional Sawdust Maker
Focus: Build
superspeedo wrote:
how to tell the Difference between spruce and pine timber


Visually they can be quite similar,
spruce is some what stiffer
pine has that unmistakable "pine" smell to it when tooled or sanded
both make good tops..just brace the pine a bit thicker.

_________________
.

Audiences and dispensations on Thursdays ~ by appointment only.



.


Top
 Profile  
 
 Post subject: Re: Spruce from pine?
PostPosted: Fri Jul 12, 2013 2:17 pm 
Offline
Walnut
Walnut

Joined: Fri Feb 22, 2013 8:31 am
Posts: 20
First name: Dean
Last Name: Heard
City: Bournemouth
State: uk
Zip/Postal Code: BH1 4ED
Country: England
Focus: Build
Status: Amateur
I didn't know you could use pine for soundboard and bracing, but I'm new to all this! What is pine like as a top and for bracing? Dose it produce a nice sound?


Top
 Profile  
 
 Post subject: Re: Spruce from pine?
PostPosted: Fri Jul 12, 2013 3:31 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 21, 2008 8:57 pm
Posts: 1982
Location: 8.33±0.35 kpc from Galactic center, 20 light-years above the equatorial in the Sol System
First name: duh
Last Name: Padma
City: Professional Sawdust Maker
Focus: Build
superspeedo wrote:
I didn't know you could use pine for soundboard and bracing, but I'm new to all this! What is pine like as a top and for bracing? Dose it produce a nice sound?


Yo, speedo,

Cedars, Douglas-firs, cypresses, firs, junipers, kauri, larches, lutz, pines, hemlocks, redwoods, spruces, and yews are all conifers, and all make excellent soundboards / bracing... provided one compensates for the different stiffness they have. And yes, they all have a different flavour in their sound.

Spruce in the most commonly used simply because it is the stiffest.

Yes Speedo...its true. laughing6-hehe


blessings
duh ?adma

_________________
.

Audiences and dispensations on Thursdays ~ by appointment only.



.


Top
 Profile  
 
 Post subject: Re: Spruce from pine?
PostPosted: Fri Jul 12, 2013 3:57 pm 
Offline
Walnut
Walnut

Joined: Fri Feb 22, 2013 8:31 am
Posts: 20
First name: Dean
Last Name: Heard
City: Bournemouth
State: uk
Zip/Postal Code: BH1 4ED
Country: England
Focus: Build
Status: Amateur
Wow that is a really useful bit of information! So for example I have made my top with cedar and spruce braces can I use pine or cedar for the bracing on the back? The reason I ask is I'm not sure if I have spruce braces or pine? Coz I can't tell the difference? Nuff respect!!!!


Top
 Profile  
 
 Post subject: Re: Spruce from pine?
PostPosted: Mon Jul 15, 2013 12:12 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3290
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
You should ask this question in the guitar building section; you will get much more traffic. This section is for a challenge that ended months ago.

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
 Post subject: Re: Spruce from pine?
PostPosted: Mon Jul 15, 2013 9:23 am 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 14, 2009 3:14 am
Posts: 982
Location: Shefford, Québec
First name: Tim
Last Name: Mullin
City: Shefford
State: QC
Zip/Postal Code: J2M 1R5
Country: Canada
Focus: Build
Status: Professional
superspeedo wrote:
how to tell the Difference between spruce and pine timber

I assume we're talking timber from North America. Get out your hand lens, make a very clean cut on the end grain and follow along ...

"hard" pines (lodgepole, red, jack, ponderosa, etc.): longitudinal resin canals numerous, quite evenly distributed in the outer portion of every growth ring, generally visible to naked eye as dark-or light-coloured dots or as small openings, relatively conspicuous with a hand lens; transition from earlywood to latewood more or less abrupt

"soft" pines (sugar, eastern white, western white): longitudinal resin canals numerous, quite evenly distributed in the outer portion of every growth ring, generally visible to naked eye as dark-or light-coloured dots or as small openings, relatively conspicuous with a hand lens; transition from earlywood to latewood gradual

eastern spruces (Englemann, white, red, black): longitudinal resin canals generally sparse, unevenly distributed, sometimes absent, invisible or barely visible and not conspicuous with hand lens; latewood not pronounced, transition early to latewood gradual

Sitka spruce is the tough one, as it sometimes has more numerous resin canals than found in other spruces, and so can be confused for a soft pine. Compared to the distinctive strong resinous odour of the pines, Sitka has a much more subtle fragrance.

Source: Panshin, A.J. and de Zeeuw, C. 1970. Textbook of wood technology. 3rd Edition. McGraw-Hill.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com