Official Luthiers Forum!

Unfortunately done by me - not a happy man!
Guitar was a badly misused Epiphone Texan in the last stages of repair for my friend, who was almost in tears when his guitar was handed back to him unplayable after an extended loan to a "friend".
It was his first real guitar when he started a band ~45 years ago.
Taking 2" low tack masking tape used for protection during the fret job off, I lifted the nitro finish, STILL attached to the top layer of the spruce laminate! -

Took rest of the day off to consider what to do - contemplated having an "accidental" fire/possible suicide/break-in and theft?
Decided to attempt repair, settled on fish glue to give plenty time to line everything up.
Used a piece of very low tack tape to stop and more lifting, slightly thinned (10%) fish glue brushed on, held down with a layer of parchment paper, a slice of car cleaning sponge to distribute pressure, a ply board and about 30 lbs of iron and lead to keep everything flat.

Left for 24hrs, and holding my breath, checked how it looked -

Pretty much everything held in place, Gluboost and the pickguard will finish of the rest, but I could have done without the hassle.
Just relieved I should be able to hand back a reasonably presentable and playable guitar to my friend.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.

All part of making your bones in the repair biz. Well done.

We won't talk about some of my eff-ups.... some were spectacular!

_________________
"Act your age, not your shoe size" - Prince

That layer was already delaminated, you just uncovered it. And then repaired it for free. Your client should be happy with the work. Don't you love laminated guitars?

(Gritted teeth icon) - yes I just love them.....
Good thing the bridge is bolted on...

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.

Wow! Well in all fairness to you there was something wrong there anyway. Low tack, even regular tack, should never do that.

Yep it was a basket case in the first place and all you are doing is uncovering what is already wrong with it. That ease of delamination and this thing has been seriously baked or dried out or both before and there is no telling how much else is on the cusp of letting loose.

_________________
Ann Arbor Guitars

Looks like the original poly was aggressively sanded off because the top layer of spruce was so thin it was barely there.
Kind of suspicious about that, as the owner was "persuaded" to have top colored (opaquely) before the refinish and he didn't like it at all. Originally it was natural.
Sounds like something was being hidden by that color, possibly a sand through.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.

I have taken to removing even low tack tape with naphtha. I've had this happen on older instruments before, and it is heartbreaking and a bit of work to repair. Nice job.