Official Luthiers Forum!
https://luthiersforum.com/forum/

Cable management
https://luthiersforum.com/forum/viewtopic.php?f=10137&t=54851		 Page 1 of 1
Author:  joshnothing [ Tue Mar 22, 2022 6:09 pm ]
Post subject:  Cable management
Here’s one I hadn’t seen before.

Image
Author:  Chris Pile [ Tue Mar 22, 2022 6:49 pm ]
Post subject:  Re: Cable management
My reaction...
Author:  SteveSmith [ Tue Mar 22, 2022 6:57 pm ]
Post subject:  Re: Cable management
What Chris said
Author:  joshnothing [ Tue Mar 22, 2022 7:06 pm ]
Post subject:  Re: Cable management
Hey now, perhaps drilling a hole in the x-brace was a carefully-planned attempt to reduce soundboard mass??
Author:  Hesh [ Wed Mar 23, 2022 3:56 am ]
Post subject:  Re: Cable management
laughing6-hehe laughing6-hehe laughing6-hehe Chris nailed it. :)
Author:  joshnothing [ Wed Jun 22, 2022 7:32 pm ]
Post subject:  Re: Cable management
Hey so guess what landed on the bench today -

Image

ANOTHER guitar with a hole drilled in the lower peak of the bass side x brace with a messy twist tie for cable retention.

There is now a pattern here and modus operandi that may point to someone local doing this as their standard technique during pickup installs :D

I’m somewhat baffled, surely one of the many self adhesive cable management options are easier and less destructive options than drilling a hole in the brace blind while up to your elbow in a soundhole?
Author:  fumblefinger [ Wed Jun 22, 2022 9:07 pm ]
Post subject:  Re: Cable management
Are we sure this was a mod? I had an acoustic (can't remember the make) come across the bench that had something similar. And I'm almost certain it came from the factory that way. As long as the brace is designed to have the hole, it shouldn't be a strength issue, ignoring sloppy wiring bouncing around.
Author:  joshnothing [ Wed Jun 22, 2022 9:58 pm ]
Post subject:  Re: Cable management
It’s possible - both these guitars are different brands but both made in China so possibly out of the “same factory” or at least factories that share production processes…
Author:  Chris Pile [ Thu Jun 23, 2022 12:11 am ]
Post subject:  Re: Cable management
It's a puzzlement.
Author:  Barry Daniels [ Thu Jun 23, 2022 10:52 am ]
Post subject:  Re: Cable management
How the heck could you drill a hole in the brace in a closed box? Definitely suggests a factory operation.
Author:  fumblefinger [ Thu Jun 23, 2022 8:48 pm ]
Post subject:  Re: Cable management
Thank you Mr. Daniels. You said what was in my mind, but not on my tongue. Those holes looked pretty perpendicular to the brace.
Author:  Tim Mullin [ Fri Jun 24, 2022 10:22 am ]
Post subject:  Re: Cable management
It’s one or more Chinese factories doing this. I’ve now seen a few, all Chinese, all made in recent years.


Sent from my iPad using Tapatalk
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/