Official Luthiers Forum!
https://luthiersforum.com/forum/

Top crack repair
https://luthiersforum.com/forum/viewtopic.php?f=10137&t=55103		 Page 1 of 1
Author:  mike-p [ Sat Jun 25, 2022 11:07 am ]
Post subject:  Top crack repair
Small impact crack near the bridge on a cedar top. Not done any repairs but built maybe ten acoustics. Any ideas to start? Lightly built, fair bit of belly behind the bridge. Strings are slack but a bit of a crease with tension at the crack. Image

Sent from my SM-J600FN using Tapatalk
Author:  joshnothing [ Sun Jun 26, 2022 7:17 am ]
Post subject:  Top crack repair
mike-p wrote:
Small impact crack near the bridge on a cedar top. Not done any repairs but built maybe ten acoustics. Any ideas to start? Lightly built, fair bit of belly behind the bridge. Strings are slack but a bit of a crease with tension at the crack. Image

Sent from my SM-J600FN using Tapatalk

Any crease in that region is cause to check for a loose x-brace or tone bar internally. Especially after a sharp impact and definitely if you think you are seeing more belly than you should. Start with a really thorough internal inspection.
Author:  Barry Daniels [ Sun Jun 26, 2022 12:24 pm ]
Post subject:  Re: Top crack repair
In regards to repair, determine if there is any internal reinforcement directly under the impact from bracing or the bridge plate. If not, then a small patch might be appropriate.

A steam dent removal process would probably bring the dent closer to level. Also, a little bit of CA would fill the remaining dent and bond the fractures.
Author:  mike-p [ Sun Jun 26, 2022 4:13 pm ]
Post subject:  Re: Top crack repair
Thanks Barry, I had to start a new thread to post the inside picture. Im feeling empowered! I'll try to post some more pictures, a lively handmade English guitar in classical style but for steel strings, cedar over Brazilian rosewood.

Sent from my SM-J600FN using Tapatalk
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/