Official Luthiers Forum!
https://luthiersforum.com/forum/

Neck Jig Plans available outside the US?
https://luthiersforum.com/forum/viewtopic.php?f=10139&t=50977
Page 1 of 1

Author:  Jurgen [ Sun Sep 16, 2018 7:44 am ]
Post subject:  Neck Jig Plans available outside the US?

Hi,

hadn´t been active here for a while and just noticed the thread about the neck jig. It looks like the plans won´t be send electonically. Is it possible to order the plans from Germany? As there is no contact or further description in the order section I thought this post is the easiest way to get the information. I hope someone still reads posts in this thread. I will wait ... and see... Eat Drink

Jurgen

Author:  Mark Fogleman [ Mon Sep 17, 2018 3:45 pm ]
Post subject:  Re: Neck Jig Plans available outside the US?

Which neck jig?

Author:  Jurgen [ Tue Sep 18, 2018 7:27 am ]
Post subject:  Re: Neck Jig Plans available outside the US?

Hmm, the one in the OLF Market Place. The one which this section of the forum is about.
As fas as I understood: the Woolson Neck Jig for neck angle and mortice and tenon routing

There hasn´t been much activity here, but it´s the only place where plans for it are offered or at least had been offered a few years ago. And the link in the market place seems still active.

Juergen

Author:  Mark Fogleman [ Tue Sep 18, 2018 10:45 am ]
Post subject:  Re: Neck Jig Plans available outside the US?

Sounds like something for LanceK. Might want to message him.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/